Red Dead Redemption 2
This combination provides smooth gameplay with an average of 93 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 40 | 56 | 67 | 90 |
| 1440p QHD | 61 | 85 | 102 | 136 |
| 1080p Full HD | 82 | 114 | 136 | 152 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Red Dead Redemption 2 with Intel Core i5-10400F + NVIDIA GeForce RTX 5070 Ti, In-Depth Analysis
# Red Dead Redemption 2 with Intel Core i5-10400F + NVIDIA GeForce RTX 5070 Ti
The measured frame rates for this combination show a system that scales predictably across resolutions, with the RTX 5070 Ti clearly carrying the load at 4K while the i5-10400F becomes more relevant at lower resolutions. At 1080p, the combo achieves 152 FPS on Low settings, but this drops to 90 FPS at 4K on Low, revealing how the rendering resolution shifts the bottleneck characteristics. The data shows a 62 FPS gap between 1080p Low and 4K Low, which is a substantial reduction that speaks to the GPU's workload scaling rather than any CPU limitation at higher resolutions.
Resolution Scaling
The FPS progression from 1080p to 4K tells a story of GPU-bound performance at higher resolutions. At High settings, the combo delivers 114 FPS at 1920x1080, falls to 85 FPS at 2560x1440, and reaches 56 FPS at 3840x2160. That represents a 50.9% drop from 1080p to 1440p, followed by a 34.1% further drop from 1440p to 4K. The scaling is not linear, which suggests that the RTX 5070 Ti's 16 GB of GDDR7 memory and 896.0 GB/s bandwidth are being utilized progressively more as pixel count increases.
Low settings show the most dramatic resolution scaling: 152 FPS at 1080p, 136 FPS at 1440p, and 90 FPS at 4K. The 1080p to 1440p drop is only 10.5%, indicating that at Low settings the CPU may be limiting performance at 1080p — the i5-10400F with its 6 cores and 12 threads could be holding back the GPU from reaching even higher frame rates. However, the 1440p to 4K drop of 33.8% is much steeper, showing the GPU becoming the primary constraint as resolution increases.
Medium settings provide the most complete picture with min and max FPS data. At 1080p Medium, the combo averages 136 FPS with a range of 116 to 157 FPS. At 1440p Medium, the average is 102 FPS with a range of 87 to 117 FPS. At 4K Medium, the average is 67 FPS with a range of 57 to 78 FPS. The consistency of the frame pacing, as indicated by the relatively tight min-max ranges, suggests that neither component is causing significant stuttering or frame-time spikes.
Ultra settings reveal the heaviest workload: 82 FPS at 1080p, 61 FPS at 1440p, and 40 FPS at 4K. The 4K Ultra result of 40 FPS is the only measured value that falls below the 60 FPS threshold, indicating that this combination cannot maintain smooth gameplay at maximum settings in 4K. The scaling from 1080p Ultra to 4K Ultra shows a 51.2% reduction, which aligns with the pixel count increase and confirms the GPU as the dominant factor at this quality level.
FAQ
Q: Can this combo run Red Dead Redemption 2 at 60 FPS in 4K?
A: Only at Low settings, where the average FPS is 90. At Medium settings, the average is 67 FPS, which is still above 60. High settings yield 56 FPS, and Ultra settings drop to 40 FPS.
Q: Is the Intel Core i5-10400F a bottleneck for the RTX 5070 Ti in this game?
A: The data suggests CPU limitation primarily at 1080p Low, where the combo achieves 152 FPS. The gap between 1080p Low (152 FPS) and 1440p Low (136 FPS) is only 16 FPS, indicating the CPU may be capping performance at lower resolutions. At higher resolutions and settings, the GPU becomes the limiting factor.
Q: What is the best resolution for this combo in Red Dead Redemption 2?
A: 1440p Medium provides the best balance, with an average of 102 FPS and a minimum of 87 FPS. This maintains smooth gameplay while offering higher visual fidelity than Low settings. At 4K, only Low and Medium settings achieve averages above 60 FPS.
Q: How does the RTX 5070 Ti compare to its nearest rivals in general benchmarks?
A: The RTX 5070 Ti has an average benchmark score of 49957, which is 0.1% higher than the AMD Radeon RX Vega 64 (50001), 0.4% higher than the Intel Arc A550M (49737), 2% lower than the AMD Radeon RX 6900 XT (50951), and 3.1% higher than the AMD Radeon RX 6800 XT (48477).
Q: What is the performance difference between High and Ultra settings at 1440p?
A: At 2560x1440, High settings average 85 FPS while Ultra settings average 61 FPS. This represents a 28.2% performance penalty for Ultra settings, which may not justify the visual improvement depending on user preference.
Q: Does the combo maintain consistent frame rates at 4K Medium?
A: Yes, the measured min FPS is 57 and max FPS is 78, giving an average of 67 FPS. The 21 FPS range between minimum and maximum indicates reasonably stable performance without severe frame-time spikes.
How This Combo Ranks
The combo ranks 552 out of 3714 tested combinations in Red Dead Redemption 2, placing it in the top 14.9% of all tested systems. This is a respectable position, especially considering the CPU is a mid-range 10th generation Intel part paired with a high-end 50-series GPU. The ranking suggests that the combination performs well relative to the broader database, though there is room for improvement.
The CPU itself sits at the 68th percentile among all CPUs in the database, with an average benchmark score of 14185. Its nearest rival, the Intel Xeon 6756E, scores 14163 (0.2% lower), while the Intel Core 7 160UL scores 14232 (0.3% higher). This places the i5-10400F in a tight cluster of similarly performing processors, indicating that it is a solid but not exceptional CPU for this workload.
The GPU, however, performs at the 86th percentile among all GPUs, with an average benchmark score of 49957. This is significantly higher than the CPU's percentile ranking, confirming that the RTX 5070 Ti is the stronger component in this pairing. The GPU's nearest rival is the AMD Radeon RX Vega 64 at 50001 (0.1% higher), followed by the Intel Arc A550M at 49737 (0.4% lower). The AMD Radeon RX 6900 XT scores 50951 (2% higher), while the AMD Radeon RX 6800 XT scores 48477 (3.1% lower).
The disparity between CPU and GPU performance percentiles explains why the combo ranks where it does — the CPU is likely holding back the GPU in less demanding scenarios, while the GPU dominates in heavier workloads. The rank of 552 out of 3714 suggests that this pairing is competitive but not optimal; systems with more powerful CPUs would likely rank higher in CPU-bound scenarios.
Measured FPS Breakdown
At 1920x1080, the combo delivers its highest frame rates. Low settings produce an average of 152 FPS, while Medium settings average 136 FPS with a range of 116 to 157 FPS. High settings drop to 114 FPS, and Ultra settings average 82 FPS. The progression from Low to Ultra shows a 46.1% reduction in performance, which is significant but expected given the increased graphical workload.
At 2560x1440, the frame rates remain playable across all settings. Low settings average 136 FPS, Medium settings average 102 FPS with a range of 87 to 117 FPS, High settings average 85 FPS, and Ultra settings average 61 FPS. The 1440p results show a smaller relative drop from 1080p compared to the 4K results, indicating that the GPU can handle the intermediate resolution without excessive strain.
At 3840x2160, the GPU's limits become apparent. Low settings average 90 FPS, Medium settings average 67 FPS with a range of 57 to 78 FPS, High settings average 56 FPS, and Ultra settings drop to 40 FPS. The 4K results show that this combo is capable of 4K gaming, but only at lower quality presets if 60 FPS is the target.
The Medium settings row at each resolution provides the most complete data, including minimum and maximum FPS. The min-max ranges are relatively consistent: 41 FPS at 1080p, 30 FPS at 1440p, and 21 FPS at 4K. This narrowing range at higher resolutions suggests that frame times become more consistent as the GPU becomes the primary bottleneck, reducing CPU-related variability.
CPU Role
The Intel Core i5-10400F is a 6-core, 12-thread processor based on the Comet Lake architecture, manufactured on a 14 nm process. It has a base clock of 2.90 GHz and a boost clock of 4.30 GHz, with 12 MB of shared L3 cache. The processor supports DDR4 memory with dual-channel configuration and a memory bandwidth of 42.7 GB/s. Its 65 W TDP indicates modest power requirements, and it uses the Intel Socket 1200 with PCIe Gen 3, 16 Lanes.
In synthetic benchmarks, the i5-10400F shows typical scaling from single-threaded to multi-threaded workloads. Its 3DMark scores range from 688 in single-thread to 4748 in 16-thread tests, while 4-thread and 8-thread scores are 2560 and 3929 respectively. Cinebench R23 results show 10283 in multicore and 1451 in singlecore, and Geekbench scores are 6257 multicore and 1420 singlecore. The Passmark multithread score is 12115, with a single-thread score of 2541.
For Red Dead Redemption 2, the CPU's role appears to be most significant at 1080p Low settings, where the 152 FPS result may be capped by the processor's single-thread performance. The 3DMark single-thread score of 688 and Cinebench R23 singlecore score of 1451 suggest that the CPU's per-core performance is adequate but not exceptional. The game likely uses multiple threads, and the 6-core/12-thread configuration provides sufficient parallelism for most scenarios.
The CPU's 68th percentile ranking among all CPUs means it outperforms roughly two-thirds of processors in the database, but it is not a high-end part. In this context, the i5-10400F may limit the RTX 5070 Ti's performance in CPU-bound scenarios, particularly at lower resolutions and settings where frame rates are highest. However, at 4K, the GPU becomes the limiting factor, and the CPU's influence diminishes.
Settings Recommendations
The measured data suggests that Medium settings provide the best balance of performance and visual quality for this combo. At 1440p Medium, the combo averages 102 FPS with a minimum of 87 FPS, which is well above the 60 FPS threshold and offers a substantial improvement over Low settings without the performance penalty of High or Ultra. The min-max range of 87 to 117 FPS indicates consistent frame delivery.
For 4K gaming, Low settings at 90 FPS provide the smoothest experience, while Medium settings at 67 FPS are also viable. High settings at 56 FPS may be acceptable for users who prioritize visual quality over frame rate, but the 40 FPS Ultra result is likely too low for most players. The 4K Medium setting's minimum of 57 FPS is close to the 60 FPS threshold and may cause occasional dips below smooth gameplay.
At 1080p, Medium settings at 136 FPS offer excellent performance with a minimum of 116 FPS, making this the most forgiving resolution for this combo. High settings at 114 FPS are also excellent, and even Ultra at 82 FPS provides smooth gameplay. The 1080p results indicate that users with 1080p displays can comfortably use High or Ultra settings without sacrificing playability.
The data suggests that users should prioritize Medium settings for the most consistent experience across all resolutions. The Medium preset at each resolution provides the only complete min-max data, which allows for precise performance expectations. For users with high refresh rate monitors at 1080p, High settings at 114 FPS may be preferable to Medium's 136 FPS if visual fidelity is more important than raw frame rate.
GPU Role
The NVIDIA GeForce RTX 5070 Ti is based on the GB203 chip with Blackwell 2.0 architecture, manufactured on a 5 nm process at TSMC. It features 45,600 million transistors on a 378 mm² die, with a transistor density of 120.6M per mm². The GPU has 8960 shading units, 280 texture mapping units, and 96 raster output units, along with 70 ray tracing cores and 280 tensor cores.
The GPU's clock speeds are 2295 MHz base and 2452 MHz boost, with memory running at 1750 MHz (28 Gbps effective). The 16 GB of GDDR7 memory uses a 256-bit bus, providing 896.0 GB/s of bandwidth. The GPU's compute capabilities include 43.94 TFLOPS for both FP32 and FP16 operations, and it supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4.
In gaming workloads, the RTX 5070 Ti demonstrates its strength at 4K, where the 16 GB VRAM capacity and high memory bandwidth are fully utilized. The 4K Low result of 90 FPS shows that even at lower settings, the GPU can handle the pixel count. The 4K Ultra result of 40 FPS indicates that the GPU's raw compute power is stretched at maximum settings, but this is expected for a demanding title like Red Dead Redemption 2.
The GPU's 86th percentile ranking among all GPUs places it well above the CPU's 68th percentile, confirming that the RTX 5070 Ti is the dominant component in this pairing. The GPU's average benchmark score of 49957 is more than three times the CPU's 14185, highlighting the disparity in their relative performance capabilities.
The RTX 5070 Ti's 300 W TDP and suggested 700 W PSU requirement indicate high power demands, but the GPU's performance in this benchmark justifies the power draw. The GPU's pixel rate of 235.4 GPixel/s and texture rate of 686.6 GTexel/s show its capability to process large amounts of graphical data, which is essential for 4K gaming. The GPU's support for PCIe 5.0 x16 ensures sufficient bandwidth for data transfer, although the CPU's PCIe Gen 3 interface may limit this in practice.
Hardware Specifications
Intel Core i5-10400F
NVIDIA GeForce RTX 5070 Ti
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i5-10400F + NVIDIA GeForce RTX 5070 Ti in Red Dead Redemption 2
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 90.0 |
| 3840x2160 | Medium | 67.0 |
| 3840x2160 | High | 56.0 |
| 3840x2160 | Ultra | 40.0 |
| 2560x1440 | Low | 136.0 |
| 2560x1440 | Medium | 102.0 |
| 2560x1440 | High | 85.0 |
| 2560x1440 | Ultra | 61.0 |
| 1920x1080 | Low | 152.0 |
| 1920x1080 | Medium | 136.0 |
| 1920x1080 | High | 114.0 |
| 1920x1080 | Ultra | 82.0 |
Red Dead Redemption 2 with ii5-10400F + Other GPUs
See how Red Dead Redemption 2 performs with the same CPU but different graphics cards.
Red Dead Redemption 2 with RTX 5070 Ti + Other CPUs
See how Red Dead Redemption 2 performs with the same GPU but different processors.
Other Games with ii5-10400F + RTX 5070 Ti
Explore FPS benchmarks for other games using this same hardware combination.