Red Dead Redemption 2

Red Dead Redemption 2

AVERAGE FPS
80
good

This combination provides smooth gameplay with an average of 80 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 35 50 55 71
1440p QHD 50 73 87 115
1080p Full HD 70 97 113 150

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 71
3840x2160 Medium 55
3840x2160 High 50
3840x2160 Ultra 35
2560x1440 Low 115
2560x1440 Medium 87
2560x1440 High 73
2560x1440 Ultra 50
1920x1080 Low 150
1920x1080 Medium 113
1920x1080 High 97
1920x1080 Ultra 70

Red Dead Redemption 2 with Intel Core i5-10400F + NVIDIA GeForce RTX 3080 Ti, In-Depth Analysis

Resolution Scaling

The measured FPS data for Red Dead Redemption 2 with the Intel Core i5-10400F and NVIDIA GeForce RTX 3080 Ti reveals a pronounced GPU-bound scaling pattern as resolution climbs. At High settings, the transition from 1920x1080 to 2560x1440 drops average FPS from 96.9 to 72.7, a reduction of roughly 25%. Moving further to 3840x2160 at High settings yields 50 FPS, meaning the jump from 1440p to 4K costs another 31% of performance. This consistent degradation across resolution steps is the classic signature of a system where the graphics card is the primary limiting component, not the processor.

The Low preset tells the same story with even greater clarity. At 1920x1080 Low, the combo produces 149.6 FPS, which drops to 114.9 at 2560x1440 and then to 71.3 at 3840x2160. The 4K figure represents a 52% loss relative to 1080p, and this steep falloff indicates that even at the lowest graphical load, the RTX 3080 Ti's rendering throughput is what caps performance. If the i5-10400F were the bottleneck, we would expect the 1080p Low result to plateau rather than scale so dramatically with resolution.

Ultra settings amplify the GPU limitation further. The 4K Ultra result of 35.3 FPS is less than half the 1080p Ultra figure of 70.4 FPS. This near-linear relationship between pixel count and frame rate is textbook GPU-bound behavior. The data suggests that users seeking higher frame rates at 4K should consider lowering settings rather than upgrading the CPU, as the processor has ample headroom based on the scaling trends.

How This Combo Ranks

Within the benchmark database, this processor and graphics card pairing ranks 409th out of 1,687 tested combinations for Red Dead Redemption 2. This places the combo in the top 24% of all tested systems, a strong showing that reflects the raw capability of both components. The RTX 3080 Ti is the dominant contributor here, as its standalone benchmark percentile sits at 83, meaning it outperforms 83% of all GPUs in the database. The i5-10400F, by contrast, holds a 73rd percentile ranking among CPUs, which is respectable but clearly secondary in this pairing.

The GPU's nearest rival data reinforces its high standing. The RTX 3080 Ti's average benchmark score of 41,224 is within 0.5% of the NVIDIA GeForce RTX 3090's 41,441, and it actually edges out the RTX 5070, which scores 41,687 with a deltaPct of -1.1%. This places the 3080 Ti in rarefied company, trading blows with cards from newer generations. The CPU's nearest rivals tell a different story, with the i5-10400F's average score of 14,168 sitting within 1.2% of the Intel Core i5-8500 and AMD Ryzen Embedded V2546, indicating it is squarely mid-pack for its era.

The combination's 409th rank out of 1,687 combos suggests that while the GPU is elite, the CPU drags the overall standing down slightly. Systems pairing the RTX 3080 Ti with higher-tier processors likely occupy the upper echelons of this ranking. Nonetheless, a top-quartile position in a demanding title like Red Dead Redemption 2 is a solid outcome for this pairing.

GPU Role

The NVIDIA GeForce RTX 3080 Ti is built on the Ampere architecture using the GA102 chip, fabricated on Samsung's 8 nm process with 28,300 million transistors across a 628 mm² die. Its memory subsystem comprises 12 GB of GDDR6X on a 384-bit bus, delivering 912.4 GB/s of bandwidth. This memory configuration is particularly relevant for Red Dead Redemption 2, a game known for large textures and open-world streaming. The 12 GB capacity ensures the card does not run into VRAM limits at 4K Ultra, where the 35.3 FPS result is attributable to compute throughput rather than memory exhaustion.

Clock speeds see the card run at a 1365 MHz base and 1665 MHz boost. These clocks, combined with 10,240 shading units, 320 TMUs, and 112 ROPs, yield a peak FP32 throughput of 34.10 TFLOPS. The pixel rate of 186.5 GPixel/s and texture rate of 532.8 GTexel/s are the specifications that directly influence how quickly the card can fill frames at high resolutions. The data confirms these specifications translate into real-world performance, as the card's 83rd percentile standing among all GPUs is backed by a 3DMark Steel Nomad DX12 score of 5,077.

The GPU's launch MSRP is 1,199 USD, and it was released on 2021-05-30, with the GeForce 40 series as its successor. Its production status is end-of-life, meaning this is a mature product with established driver support. For Red Dead Redemption 2 specifically, the card's performance at 1440p High (72.7 FPS) and 1080p High (96.9 FPS) indicates it is well-suited for high-refresh-rate gaming at those resolutions, while 4K requires settings compromises to maintain playable frame rates.

Measured FPS Breakdown

At 1920x1080, the combo delivers its highest frame rates across all settings. Low settings produce 149.6 FPS, Medium yields 112.9 FPS, High drops to 96.9 FPS, and Ultra bottoms out at 70.4 FPS. The gap between Low and Ultra is 79.2 FPS, representing a 53% performance penalty for maxing out graphical fidelity. This range shows that at 1080p, the system can comfortably exceed 60 FPS even at Ultra, making it a strong choice for high-refresh-rate monitors.

Moving to 2560x1440, the frame rates remain respectable but the Ultra preset begins to struggle. Low settings achieve 114.9 FPS, Medium produces 86.6 FPS, High delivers 72.7 FPS, and Ultra falls to 49.9 FPS. The 1440p Ultra result is the first instance where the combo dips below the 60 FPS threshold, suggesting that users prioritizing smoothness should select High or Medium at this resolution. The 114.9 FPS Low result indicates the CPU can still feed the GPU effectively at 1440p, as the frame rate remains well above 100.

At 3840x2160, the GPU is clearly overtaxed by the higher preset levels. Low settings yield 71.3 FPS, which is playable, but Medium drops to 54.5 FPS, High to 50 FPS, and Ultra to 35.3 FPS. The 4K results show a dramatic sensitivity to settings, with the Low to Ultra spread of 36 FPS representing a 51% performance range. Only the Low preset at 4K achieves a frame rate that could be considered smooth for most players, while Ultra is relegated to screenshot territory or slower-paced exploration.

FAQ

Q: Can this combo run Red Dead Redemption 2 at 4K 60 FPS?

A: No, not at any preset. The highest 4K result is 71.3 FPS on Low settings, but Medium drops to 54.5 FPS, High to 50 FPS, and Ultra to 35.3 FPS. None of the High or Ultra presets reach 60 FPS at 3840x2160.

Q: What is the best resolution for this pairing?

A: The data shows 2560x1440 on High settings provides 72.7 FPS, which is above the 60 FPS threshold. This represents the sweet spot where visual quality remains high while frame rates stay smooth. At 1080p Ultra, the combo achieves 70.4 FPS, offering a similar experience with lower resolution but maximum fidelity.

Q: Is the RTX 3080 Ti a bottleneck at 1080p?

A: No. The 1080p Low result of 149.6 FPS and High result of 96.9 FPS demonstrate the GPU has substantial headroom. The scaling from 1080p to 1440p shows a consistent drop, which is GPU-bound behavior, meaning the i5-10400F is not limiting these results.

Q: How does this GPU compare to its nearest rivals?

A: The RTX 3080 Ti's average benchmark score of 41,224 is 0.5% below the RTX 3090's 41,441, making them effectively equivalent. It also outperforms the RTX 5070, which scores 41,687 with a deltaPct of -1.1%, and the AMD Radeon Pro 5300, which scores 41,610 with a deltaPct of -0.9%.

Q: What CPU performance tier does the i5-10400F occupy?

A: The CPU's average benchmark score of 14,168 places it within 1.2% of the Intel Core i5-8500 and AMD Ryzen Embedded V2546. It sits at the 73rd percentile among all CPUs, indicating it is a mid-range processor that does not compete with high-end desktop chips.

Q: Is the 12 GB VRAM sufficient for this game?

A: The measured results suggest yes. The 4K Ultra result of 35.3 FPS is limited by compute performance, not memory capacity, as the card's 912.4 GB/s bandwidth and 12 GB GDDR6X memory are among the highest in the database. There is no evidence of VRAM-related stuttering in the FPS data.

Settings Recommendations

For players targeting 60 FPS, the clear choice is 2560x1440 on High settings, which delivers 72.7 FPS. This provides a comfortable margin above the 60 FPS threshold while maintaining substantial graphical fidelity. At this resolution, Medium settings offer 86.6 FPS for those who prefer higher headroom, while Ultra at 49.9 FPS fails to hit the target. The 1440p High preset is the most balanced configuration in the measured data.

For 1080p users, Ultra settings at 70.4 FPS are viable, as the result stays above 60 FPS. This allows players to experience the game at maximum visual quality without sacrificing smoothness. Those with 144 Hz monitors could consider High settings at 96.9 FPS or Medium at 112.9 FPS, both of which provide a significant frame rate boost over Ultra while retaining respectable visuals. Low at 149.6 FPS is only recommended for competitive play or extreme frame rate priorities.

At 4K, the recommendations are constrained by the data. Low settings at 71.3 FPS is the only preset that exceeds 60 FPS, making it the sole playable option for smooth gameplay at this resolution. Medium at 54.5 FPS and High at 50 FPS are playable but will exhibit noticeable frame pacing issues on standard 60 Hz displays. Ultra at 35.3 FPS is not recommended for general play, as the frame rate is too low for a responsive experience in this action-adventure title. Players who insist on 4K should accept the Low preset or consider reducing resolution.

CPU Role

The Intel Core i5-10400F is a 6-core, 12-thread processor based on the Comet Lake architecture, manufactured on Intel's 14 nm process. It operates with a 2.90 GHz base clock and 4.30 GHz boost clock, drawing a 65 W TDP. The chip features 64 KB of L1 cache per core, 256 KB of L2 per core, and 12 MB of shared L3 cache. Memory support is DDR4 in dual-channel configuration, providing 42.7 GB/s of bandwidth. This specification set places the CPU at the 73rd percentile among all processors, with an average benchmark score of 14,168.

In Red Dead Redemption 2, the CPU's role is secondary to the GPU, as evidenced by the resolution scaling data. The game is not heavily threaded, and the 6-core/12-thread configuration is sufficient to avoid bottlenecking the RTX 3080 Ti at 1080p, where the 149.6 FPS Low result indicates the CPU can feed frames at high rates. The Cinebench R23 multicore score of 10,297 and single-core score of 1,453 show balanced performance that suits this title's demands.

The CPU's nearest rivals include the AMD EPYC 7552 with a deltaPct of 0.4%, the AMD Ryzen 3 7320C at -0.8%, the Intel Core i5-8500 at -1.1%, and the AMD Ryzen Embedded V2546 at -1.2%. These close margins indicate the i5-10400F is competitively positioned among its peers. The 3DMark 16-thread score of 4,748 and max-thread score of 4,735 demonstrate that the CPU scales well with thread utilization, though the game does not appear to require maximum thread usage based on the FPS results. For this title, the CPU is a capable partner to the GPU, providing enough throughput to let the RTX 3080 Ti operate without artificial constraints.

Hardware Specifications

Intel Core i5-10400F

Cores / Threads 6 / 12
Base Clock 2900 MHz
Boost Clock 4300 MHz
TDP 65W
Socket Intel Socket 1200
View Full CPU Details →

NVIDIA GeForce RTX 3080 Ti

VRAM 12 GB GDDR6X
Base Clock —
Boost Clock 1665 MHz MHz
TDP 350 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core i5-10400F + NVIDIA GeForce RTX 3080 Ti in Red Dead Redemption 2

Resolution Settings Avg FPS
3840x2160 Low 71.3
3840x2160 Medium 54.5
3840x2160 High 50.0
3840x2160 Ultra 35.3
2560x1440 Low 114.9
2560x1440 Medium 86.6
2560x1440 High 72.7
2560x1440 Ultra 49.9
1920x1080 Low 149.6
1920x1080 Medium 112.9
1920x1080 High 96.9
1920x1080 Ultra 70.4

Red Dead Redemption 2 with ii5-10400F + Other GPUs

See how Red Dead Redemption 2 performs with the same CPU but different graphics cards.

Red Dead Redemption 2 with RTX 3080 Ti + Other CPUs

See how Red Dead Redemption 2 performs with the same GPU but different processors.

Other Games with ii5-10400F + RTX 3080 Ti

Explore FPS benchmarks for other games using this same hardware combination.