Red Dead Redemption 2
This combination provides smooth gameplay with an average of 62 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 26 | 36 | 43 | 58 |
| 1440p QHD | 39 | 55 | 65 | 87 |
| 1080p Full HD | 53 | 73 | 88 | 117 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Red Dead Redemption 2 with AMD Ryzen 9 9900X3D + NVIDIA GeForce RTX 5060, In-Depth Analysis
The AMD Ryzen 9 9900X3D paired with the NVIDIA GeForce RTX 5060 produces a specific performance profile in Red Dead Redemption 2 that hinges almost entirely on resolution. The data indicates a system where the CPU is exceptionally strong for this title, but the GPU becomes the definitive bottleneck as pixel count rises. This analysis breaks down the measured frames per second (FPS) across three resolutions and four quality presets to show exactly where this combo excels and where it falls short.
Resolution Scaling
The measured FPS data for this combo reveals a steep and predictable performance curve as resolution increases. At 1920x1080 with Low settings, the system achieves 117 FPS, which drops to 87 FPS at 2560x1440 and further to 58 FPS at 3840x2160. This represents a 26% decrease from 1080p to 1440p, and a 50% decrease from 1080p to 4K at the same settings. This scaling pattern strongly suggests that the NVIDIA GeForce RTX 5060 is the limiting factor; the CPU has ample headroom, but the GPU's rendering workload increases exponentially with pixel count.
Examining the High preset tells a similar story. The system produces 73 FPS at 1080p, which falls to 55 FPS at 1440p, and then to 36 FPS at 4K. The drop from 1440p to 4K is particularly severe, representing a 35% reduction in performance. This non-linear drop indicates that the RTX 5060's 8 GB of GDDR7 memory and 128-bit memory bus are being saturated at higher resolutions. The data suggests that 1080p is the sweet spot for this combination, where the GPU can keep pace with the processor's ability to feed it frames.
At the Ultra preset, the scaling is even more dramatic. The combo manages 53 FPS at 1080p, but this collapses to 39 FPS at 1440p and a marginal 26 FPS at 4K. The gap between 1440p and 4K here is 13 FPS, which is a 33% loss. This indicates that Ultra settings impose a heavy burden on the GPU's shading units and ROPs, making high-resolution Ultra gaming impractical with this configuration. The data clearly shows that the limiting component is the GPU, especially when compared to the CPU's robust benchmark scores.
GPU Role
The NVIDIA GeForce RTX 5060 is built on the Blackwell 2.0 architecture with a 5 nm process and features 3840 shading units. Its base clock is 2280 MHz, boosting to 2497 MHz, and it has a memory bandwidth of 448.0 GB/s across a 128-bit bus. While these specs are respectable for 1080p gaming, the measured FPS in Red Dead Redemption 2 highlights the GPU's limitations at higher resolutions. The 8 GB of GDDR7 memory appears to be a constraint, particularly at 4K where the High preset yields only 36 FPS.
The GPU's benchmark percentile of 72 places it above average, but its nearest rivals include the AMD Radeon RX 6750 XT (1.2% faster) and the AMD Radeon RX 5700 XT 50th Anniversary (0.8% slower). This positions the RTX 5060 as a mid-range performer. In this game, the GPU's 48 ROPs and 120 TMUs are tasked with rendering complex scenes, and the data suggests they struggle to maintain fluid frame rates beyond 1440p. The pixel rate of 119.9 GPixel/s and texture rate of 299.6 GTexel/s are adequate for 1080p, but they become insufficient as resolution scaling demands more fill rate.
The GPU's 19.18 TFLOPS of FP32 performance is a key metric, but it does not translate into playable 4K performance in this title. The data shows that the GPU is the primary bottleneck, as the CPU's high multi-threaded capabilities (Cinebench R23 multi-core score of 47737) cannot compensate for the GPU's raw rendering limits. For this game, the RTX 5060 is best suited for 1080p and entry-level 1440p gaming, with the measured FPS confirming that High settings at 1440p (55 FPS) is the practical ceiling for a smooth experience.
How This Combo Ranks
In the database of tested combinations, this Ryzen 9 9900X3D + RTX 5060 pairing ranks 1269th out of 2902 combos for Red Dead Redemption 2. This places it in the upper-middle tier of all tested systems, indicating that while it is not a top-tier performer, it is far from the bottom. The CPU's strong benchmark performance, with a percentile of 91 against all CPUs, is somewhat wasted in this configuration because the GPU holds the system back.
The combo's rank of 1269 out of 2902 suggests that roughly 44% of tested combinations deliver higher FPS in this game. This is primarily due to the GPU's position in the market; its nearest rivals include the NVIDIA GeForce MX550 (0.3% slower) and the AMD Radeon 860M (0.3% slower), which are typically found in lower-end systems. The fact that the RTX 5060 is in the same performance class as these GPUs, despite being a discrete desktop card, explains why the combo ranks relatively low despite the powerful CPU.
The deltaPct values for the GPU's rivals show that the RTX 5060 is essentially tied with several other mid-range options, with performance differences of less than 1.2%. This means that swapping the GPU for a slightly different model would not dramatically change the combo's rank in this game. The CPU's nearest rivals, such as the Intel Core Ultra 5 245KF (0.6% faster) and the Intel Core i7-14700F (2.1% faster), show that the processor is competitive, but its impact on gaming FPS is minimal when the GPU is the bottleneck. The rank reflects the balanced performance of the system, but the data emphasizes that the GPU is the limiting factor for this specific title.
Settings Recommendations
Based on the measured FPS data, the optimal settings for this combo depend on the target resolution and desired frame rate. At 1920x1080, the Medium preset delivers 88 FPS with a minimum of 75 FPS and a maximum of 101 FPS, offering a smooth experience with a good balance of visual quality and performance. The High preset at 1080p achieves 73 FPS, which is still playable, but the 15 FPS difference between Medium and High may not justify the visual gain for competitive players. For a more fluid experience, the Low preset at 1080p hits 117 FPS, which is ideal for high-refresh-rate monitors.
At 2560x1440, the Medium preset yields 65 FPS with a minimum of 56 FPS, which is just at the edge of playability for most users. The High preset at 1440p drops to 55 FPS, which may cause noticeable stutters in demanding scenes. For a consistent 60+ FPS experience at 1440p, the Low preset is the only viable option, producing 87 FPS. Pushing to Ultra at 1440p results in 39 FPS, which is not recommended for smooth gameplay.
At 3840x2160, the data shows that this combo is not suited for high-quality 4K gaming. The Low preset achieves 58 FPS, which is barely playable, while the Medium preset drops to 43 FPS with a minimum of 37 FPS. High and Ultra settings at 4K produce 36 FPS and 26 FPS respectively, which are too low for a satisfying experience. The recommended path is to stick with 1080p Medium or High for the best balance, or to accept lower visual fidelity at 1440p to maintain frame rates above 60 FPS.
Measured FPS Breakdown
At 1920x1080, the performance envelope is wide, ranging from 117 FPS at Low to 53 FPS at Ultra. The Medium preset provides 88 FPS average, with a minimum of 75 FPS and a maximum of 101 FPS, indicating a stable frame time. The High preset at 1080p produces 73 FPS, which is a 17% reduction from Medium. The Ultra preset at 53 FPS is 55% slower than Low, showing that the GPU's workload increases significantly with each quality tier.
Moving to 2560x1440, the frame rates compress. The Low preset yields 87 FPS, which is a 26% drop from the 1080p Low result. The Medium preset produces 65 FPS, with a minimum of 56 FPS and a maximum of 75 FPS, representing a 26% decrease from its 1080p counterpart. The High preset at 1440p achieves 55 FPS, a 25% reduction from 1080p High. Ultra at 1440p is 39 FPS, a 26% decline from 1080p Ultra. This consistent ~25-26% drop across all settings confirms that the GPU is scaling predictably with resolution.
At 3840x2160, the performance hits its lowest points. The Low preset manages 58 FPS, which is a 33% drop from 1440p Low and a 50% drop from 1080p Low. The Medium preset at 4K yields 43 FPS, with a minimum of 37 FPS and a maximum of 50 FPS, showing significant frame time variance. The High preset at 4K is 36 FPS, a 35% reduction from 1440p High. Ultra at 4K is 26 FPS, a 33% drop from 1440p Ultra. These numbers indicate that 4K is only viable at Low settings, and even then, the 58 FPS average may dip in demanding scenes.
FAQ
Q: What is the best resolution for this CPU and GPU combo in Red Dead Redemption 2?
A: The data shows that 1920x1080 is the best resolution, offering the highest frame rates across all settings. At 1080p Medium, the combo achieves 88 FPS, and at Low it reaches 117 FPS. Performance drops significantly at higher resolutions, with 4K only being playable at Low settings (58 FPS).
Q: How does the RTX 5060 compare to its nearest rivals in this game?
A: The RTX 5060's benchmark scores are nearly identical to its nearest rivals. It is 1.2% slower than the AMD Radeon RX 6750 XT and 0.3% faster than the NVIDIA GeForce MX550. These small deltas mean that performance in this game will be very similar across these GPUs.
Q: Can this system handle 4K gaming in Red Dead Redemption 2?
A: Benchmarks indicate that 4K gaming is only feasible at Low settings, which produces 58 FPS. Medium settings at 4K drop to 43 FPS, and High settings yield 36 FPS. For a consistently smooth experience, 1080p or 1440p is recommended.
Q: What is the combo's overall ranking among all tested systems?
A: This Ryzen 9 9900X3D + RTX 5060 combo ranks 1269th out of 2902 tested combinations for Red Dead Redemption 2. This places it in the upper-middle tier, with the GPU being the primary limiting factor.
Q: Which settings preset provides the best balance of performance and visual quality?
A: At 1080p, the Medium preset is the best choice, delivering 88 FPS with good visual fidelity. At 1440p, the Low preset is required to exceed 60 FPS, achieving 87 FPS. The High preset at 1440p drops to 55 FPS, which may be too low for some players.
Q: Is the CPU or GPU the main bottleneck for this game?
A: The data clearly shows the GPU is the bottleneck. The CPU has a strong benchmark percentile of 91, while the GPU has a percentile of 72. The FPS drops from 1080p to 4K are consistent with GPU limitations, not CPU performance.
Hardware Specifications
AMD Ryzen 9 9900X3D
NVIDIA GeForce RTX 5060
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 9 9900X3D + NVIDIA GeForce RTX 5060 in Red Dead Redemption 2
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 58.0 |
| 3840x2160 | Medium | 43.0 |
| 3840x2160 | High | 36.0 |
| 3840x2160 | Ultra | 26.0 |
| 2560x1440 | Low | 87.0 |
| 2560x1440 | Medium | 65.0 |
| 2560x1440 | High | 55.0 |
| 2560x1440 | Ultra | 39.0 |
| 1920x1080 | Low | 117.0 |
| 1920x1080 | Medium | 88.0 |
| 1920x1080 | High | 73.0 |
| 1920x1080 | Ultra | 53.0 |
Red Dead Redemption 2 with Ryzen 9 9900X3D + Other GPUs
See how Red Dead Redemption 2 performs with the same CPU but different graphics cards.
Red Dead Redemption 2 with RTX 5060 + Other CPUs
See how Red Dead Redemption 2 performs with the same GPU but different processors.
Other Games with Ryzen 9 9900X3D + RTX 5060
Explore FPS benchmarks for other games using this same hardware combination.