Red Dead Redemption 2

The AMD Ryzen 7 9800X3D paired with the Intel Arc B580 lands at rank 1313 out of 1687 tested combos in Red Dead Redemption 2. That places this pairing in the bottom 22% of all configurations, a low standing driven almost entirely by the graphics card rather than the processor. The 9800X3D sits in the 90th percentile among all CPUs, while the Arc B580 sits in the 66th percentile among all GPUs. This gap in relative standing tells the story: the CPU is a top-tier part, but the GPU holds this combo back from competitive frame rates.

How This Combo Ranks

At rank 1313 of 1687 combos, this system is positioned firmly in the lower third of tested configurations for Red Dead Redemption 2. The ranking reflects the Arc B580's limitations at higher settings and resolutions, not a fundamental mismatch of components. The CPU's 90th percentile standing is exceptional, but in this title, the GPU becomes the binding constraint. The data shows a combo that can handle 1080p Low with ease but struggles to maintain playable frame rates at 4K Ultra. The rank is consistent across the board: this is not a configuration aimed at maximum visual fidelity or high-refresh-rate 1440p gaming in this specific title.

GPU Role

The Intel Arc B580 brings 12 GB of GDDR6 memory on a 192-bit bus, delivering 456.0 GB/s of bandwidth. Its base and boost clocks are both 2670 MHz, with memory running at 2375 MHz (19 Gbps effective). The GPU has 2560 shading units, 160 TMUs, and 80 ROPs, with 20 ray tracing cores. These specifications translate into a passmark G3D score of 15748, placing it in the 66th percentile of all GPUs. Its nearest rival, the NVIDIA GeForce RTX 4060, scores 23181 in average benchmark score, which is 0.7% higher — a negligible difference in raw compute but one that manifests in real-world frame rates.

In Red Dead Redemption 2, the GPU's 12 GB frame buffer is rarely the limiting factor at 1080p, but at 4K Ultra, the combination of heavy shading and memory pressure pushes the card to its limits. The data shows 21.9 FPS at 4K Ultra, which is below playable thresholds. The GPU's 66th percentile rank means it outperforms a majority of cards, but that is not enough for this demanding title at higher presets. The 456 GB/s bandwidth helps at lower settings, where the card can stretch its legs, but the 13.67 TFLOPS FP32 compute is simply not enough for 4K Ultra in this game.

Resolution Scaling

The FPS drops from 1080p to 4K reveal a GPU-limited scenario. At High settings, the average frame rate falls from 53.7 FPS at 1920x1080 to 43.6 FPS at 2560x1440, then to 27.8 FPS at 3840x2160. That is a 48% reduction from 1080p to 4K High. At Low settings, the drop is steeper in percentage terms: 89.9 FPS at 1080p falls to 66.3 FPS at 1440p and 45.5 FPS at 4K, a 49% reduction. The pattern holds across all settings, indicating the GPU is the primary bottleneck at every resolution.

The scaling behavior at Ultra settings is particularly telling. From 40.8 FPS at 1080p Ultra to 29.2 FPS at 1440p Ultra and 21.9 FPS at 4K Ultra, the percentage drops are 28% and 25% respectively. These are smaller relative drops than at lower settings, which suggests that at Ultra, the GPU is already saturated even at 1080p, and increasing resolution adds less incremental load. The limiting component is clearly the GPU, as the 9800X3D has ample headroom to feed frames at any of these resolutions.

FAQ

Q: Is this combo capable of 60 FPS at 1080p in Red Dead Redemption 2?

A: Only at Low settings, where it averages 89.9 FPS. At Medium it drops to 66.6 FPS, at High it falls to 53.7 FPS, and at Ultra it averages 40.8 FPS.

Q: How does the Arc B580 compare to its nearest rival, the RTX 4060?

A: The RTX 4060 has an average benchmark score of 23181, which is 0.7% higher than the Arc B580's 23021. This places the two cards within a margin that is effectively a statistical tie, but the Arc B580's 66th percentile rank versus the RTX 4060's position suggests similar real-world performance.

Q: What is the best resolution and settings combination for this system?

A: The data shows 1440p Low at 66.3 FPS or 1080p Low at 89.9 FPS as the only configurations that exceed 60 FPS. For a balance of quality and playability, 1440p Medium at 51.2 FPS is the highest setting that stays above 50 FPS.

Q: Is the Ryzen 7 9800X3D the bottleneck in this combo?

A: No. The CPU ranks in the 90th percentile among all processors with an average benchmark score of 37780, while the GPU ranks in the 66th percentile. The CPU is substantially stronger relative to its peers than the GPU is relative to its peers.

Q: How does the CPU's performance compare to the Intel Core i5-13600KF?

A: The 9800X3D has an average benchmark score of 37780, which is 0.7% higher than the i5-13600KF's 38028. This deltaPct of -0.7% indicates the two processors are effectively equivalent in aggregate benchmark performance.

Q: Can this system handle 4K gaming in this title?

A: At 4K Low it averages 45.5 FPS, at Medium 33.7 FPS, at High 27.8 FPS, and at Ultra 21.9 FPS. None of these are consistently playable, so 4K is not a practical target for this combo in Red Dead Redemption 2.

Measured FPS Breakdown

At 1920x1080, the combo produces 89.9 FPS on Low, 66.6 FPS on Medium, 53.7 FPS on High, and 40.8 FPS on Ultra. The jump from Low to Medium is a 26% reduction, while moving from High to Ultra costs 24% of the frame rate. At this resolution, the 9800X3D's 5.20 GHz boost clock and 96 MB shared L3 cache keep the CPU fully fed, and the Arc B580's 12 GB memory is not stressed.

At 2560x1440, the numbers shift to 66.3 FPS on Low, 51.2 FPS on Medium, 43.6 FPS on High, and 29.2 FPS on Ultra. The gap between Low and Ultra widens to 56%, indicating that the GPU's shading units and ROPs are being pushed harder. The 1440p Medium result of 51.2 FPS is the most practical high-quality target, though it still falls short of 60 FPS.

At 3840x2160, performance drops to 45.5 FPS on Low, 33.7 FPS on Medium, 27.8 FPS on High, and 21.9 FPS on Ultra. The 4K Low result is the only one above 40 FPS, and even that falls short of smooth playability. The GPU's 456.0 GB/s bandwidth and 80 ROPs are insufficient for the pixel throughput required at 4K with this game's visual complexity.

CPU Role

The AMD Ryzen 7 9800X3D is a Zen 5 part on the Granite Ridge architecture, built on a 4 nm TSMC process. It has 8 cores and 16 threads, with a base clock of 4.70 GHz and a boost clock of 5.20 GHz. The 96 MB shared L3 cache is the standout feature, designed to reduce memory latency in gaming workloads. Its memory bandwidth is 89.6 GB/s over a dual-channel DDR5 interface, and it supports PCIe Gen 5 with 24 lanes.

In synthetic benchmarks, the CPU scores 34004 in Cinebench R23 multi-core and 4800 in single-core. Its Geekbench multi-core score is 18413, and single-core is 3341. The Passmark multithread score is 40009, with a single-thread score of 4430. These numbers place it in the 90th percentile of all CPUs, with an average benchmark score of 37780. Its nearest rivals include the Intel Core i5-13600KF at 38028 (0.7% lower) and the Intel Core i9-13900HK at 38020 (0.6% lower), showing that the 9800X3D trades blows with high-end Intel parts from previous generations.

In Red Dead Redemption 2, the CPU's role is to feed the GPU with draw calls and physics calculations. The 8-core/16-thread configuration with 96 MB L3 cache is more than sufficient for this title, which scales well on modern processors. The data shows that at every resolution and setting, the frame rate is dictated by the GPU's rendering capability, not the CPU's processing speed. The 9800X3D's high single-core performance ensures that even the most demanding in-game scenarios do not create CPU bottlenecks, allowing the Arc B580 to operate at its full potential. For users who plan to upgrade the GPU later, this CPU will not be the limiting factor in future configurations.