Red Dead Redemption 2

Resolution Scaling

Red Dead Redemption 2 presents a demanding workload for the AMD Ryzen 5 7600X and NVIDIA GeForce RTX 5080 pairing. The measured FPS data shows a clear trajectory as resolution climbs. At 1080p with High settings, the combo produces 127.2 FPS. Moving to 1440p drops that to 95.1 FPS, a 25% reduction. At 4K, the average falls further to 65 FPS, representing a 49% decline from the 1080p figure. This scaling pattern indicates that at 1080p, the CPU has headroom to feed the GPU, but the frame rate is still substantial. The drop from 1080p to 1440p is steep, and the drop from 1440p to 4K is another significant step down, pointing to the GPU becoming the primary limiting factor as pixel count increases.

The Low settings data reinforces this analysis. At 1080p Low, the system reaches 206.5 FPS, a very high frame rate that suggests the CPU is doing its job without bottlenecking. At 1440p Low, the score is 151.7 FPS, and at 4K Low it is 98.7 FPS. The delta between 1080p and 1440p Low is about 27%, while the delta between 1440p and 4K Low is about 35%. This shows that even at lower graphical loads, the resolution scaling remains pronounced, confirming the GPU is the dominant constraint in this configuration. The RTX 5080, with its 16 GB of GDDR7 memory and 960.0 GB/s bandwidth, is powerful, but 4K Ultra is a heavy burden.

The gap between settings presets at the same resolution also tells a story. At 4K, the difference between Low and Ultra is 51.6 FPS (98.7 vs 47.1). At 1440p, that gap widens to 83.4 FPS (151.7 vs 68.3). At 1080p, the gap is 112.5 FPS (206.5 vs 94). The widening gap at lower resolutions suggests that the CPU can maintain higher frame rates when the GPU is less stressed, but the GPU's performance ceiling at Ultra settings is the limiting factor. The data indicates a system balanced for high-refresh 1440p gaming, but one that will struggle to hit 60 FPS at 4K Ultra without adjustments.

How This Combo Ranks

In the grand scheme of tested hardware combinations, this pairing of the Ryzen 5 7600X and the RTX 5080 holds a strong position. The combo ranks 74th out of 1687 total combos tested in Red Dead Redemption 2. This places it in the top 4.4% of all system configurations, a percentile that reflects the high-end nature of both components. The RTX 5080 alone sits in the 89th percentile among all GPUs, while the Ryzen 5 7600X is in the 83rd percentile among all CPUs. These individual standings combine to produce a system that is clearly geared toward high-performance gaming.

Looking at the CPU's nearest rivals in synthetic benchmarks, the Ryzen 5 7600X posts an average benchmark score of 26272. The AMD Ryzen 7 PRO 6850U scores 26262, a negligible 0% difference. The AMD Ryzen 7 7735U scores 26305, which is 0.1% higher, and the AMD Ryzen 5 PRO 5655GE scores 26320, a 0.2% advantage. The AMD Ryzen 7 5700X scores 26214, a 0.2% deficit. These deltas are all within a fraction of a percent, indicating that the 7600X performs on par with these rival chips in general compute tasks, though none of these are direct gaming comparisons. The CPU's single-thread performance is notable, with a PassMark single-thread score of 4135, which is strong for gaming workloads.

For the GPU, the RTX 5080's average benchmark score is 59188. Its nearest rivals in the database include the Intel Arc A570M, which scores 58239 (1.6% lower), and the Intel Arc Pro A60, which scores 60326 (1.9% higher). The Intel Arc A580 scores 57756 (2.5% lower), and the AMD Radeon Pro W5500X scores 57661 (2.6% lower). The data shows the RTX 5080 is competitive with these parts, though the margins are small in synthetic tests. The real-world gaming performance in Red Dead Redemption 2, as shown by the measured FPS, is where the combo's rank is determined, and a top-74 finish out of 1687 combos is a strong result.

FAQ

Q: What is the highest average FPS this combo achieves at 1080p?

A: The highest average FPS at 1920x1080 is 206.5, achieved with Low settings. At High settings, it drops to 127.2 FPS.

Q: Can this system run Red Dead Redemption 2 at 4K Ultra smoothly?

A: No. At 3840x2160 with Ultra settings, the average FPS is 47.1, which is below the 60 FPS threshold for smooth gameplay. At High settings, it reaches 65 FPS, which is playable.

Q: How does the combo rank among all tested configurations?

A: The combo ranks 74th out of 1687 total combos tested in this game, placing it in the top 4.4% of all systems.

Q: What is the performance difference between Low and Ultra settings at 1440p?

A: At 2560x1440, the average FPS on Low settings is 151.7, while on Ultra it is 68.3. This represents a performance drop of 83.4 FPS, or roughly 55%.

Q: Is the CPU or GPU the limiting factor at 1080p?

A: The data suggests the GPU is the limiting factor. At 1080p Low, the system hits 206.5 FPS, indicating the CPU can handle high frame rates. The drop to 94 FPS at Ultra is due to the GPU's rendering load.

Q: What is the launch MSRP of the components?

A: The CPU has a launch MSRP of $299, and the GPU has a launch MSRP of 999 USD.

Measured FPS Breakdown

The measured FPS data for this combo covers three resolutions and four settings presets, providing a complete picture of performance scaling.

At 1920x1080, the system delivers high frame rates across the board. With Low settings, the average FPS is 206.5. Medium settings yield an average of 156.6 FPS. High settings produce 127.2 FPS, and Ultra settings bring the average down to 94 FPS. The difference between Low and Ultra is 112.5 FPS, showing a significant performance cost for maximum visual fidelity.

Moving to 2560x1440, the frame rates remain respectable but drop noticeably. Low settings average 151.7 FPS. Medium settings average 115.7 FPS. High settings see an average of 95.1 FPS. Ultra settings drop the average to 68.3 FPS. The gap between Low and Ultra here is 83.4 FPS, indicating that the GPU is becoming more stressed as resolution increases.

At 3840x2160, the system begins to show its limits. Low settings still manage an average of 98.7 FPS, which is smooth. Medium settings drop to 78.6 FPS. High settings average 65 FPS, which is right at the edge of smooth gameplay. Ultra settings fall to 47.1 FPS, which is below the ideal threshold for a fluid experience. The scaling from Low to Ultra at 4K is a 51.6 FPS drop, demonstrating the heavy toll that Ultra settings take on the RTX 5080 at this resolution.

Settings Recommendations

For players using this combination, the settings choice depends heavily on the target resolution and desired frame rate. At 1080p, the system is capable of high refresh rates. Medium settings at 156.6 FPS provide a good balance between visual quality and speed, though High at 127.2 FPS is also excellent for most displays. Ultra at 94 FPS is still very playable and offers the best image quality, making it a viable choice for those prioritizing visuals over raw frame rate.

At 1440p, the sweet spot appears to be High settings, which deliver 95.1 FPS. This is above the 60 FPS threshold and provides a solid experience. Medium settings at 115.7 FPS offer a smoother experience if desired. Ultra at 68.3 FPS is playable but may feel less fluid in fast-paced scenes. Low settings at 151.7 FPS are best for competitive play, but the visual quality trade-off is significant.

At 4K, the recommendation is more straightforward. High settings at 65 FPS are the best option for a playable experience with good visuals. Medium settings at 78.6 FPS offer a smoother frame rate, which might be preferable for some. Ultra at 47.1 FPS is not recommended for a consistent experience, as it falls below the 60 FPS target. Low settings at 98.7 FPS are viable for those who prioritize frame rate above all else, but the visual downgrade is substantial. The data suggests that High settings at 4K provide the best overall balance for this hardware combination.