Ready Or Not
This combination delivers exceptional performance with an average of 233 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 81 | 116 | 127 | 146 |
| 1440p QHD | 155 | 221 | 243 | 279 |
| 1080p Full HD | 246 | 350 | 385 | 442 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Ready Or Not with Intel Core i7-14700KF + NVIDIA GeForce RTX 5070 Ti, In-Depth Analysis
Ready Or Not, a tactical shooter emphasizing close-quarters combat and environmental detail, presents a demanding workload that scales significantly with both resolution and graphical presets. This analysis examines the performance of the Intel Core i7-14700KF paired with the NVIDIA GeForce RTX 5070 Ti, using measured FPS data to determine the balance between CPU and GPU limitations, optimal settings, and the system's overall standing among tested configurations.
Resolution Scaling
The data reveals a steep performance curve as resolution increases from 1080p to 4K. At 1920x1080 with High settings, the combination delivers an average of 350 FPS. This figure drops by approximately 37% to 221 FPS at 2560x1440, and then further declines to 116 FPS at 3840x2160. This pattern strongly indicates that at 1080p, the system is heavily CPU-bound, as the framerate is exceptionally high but the scaling between resolutions is not linear.
The jump from 1080p to 1440p shows a substantial performance cost, which is typical when pixel count increases by 78%. However, the more telling metric is the transition from 1440p to 4K, where the framerate drops by nearly half. This significant reduction at 4K suggests that the rendering load has shifted decisively to the GPU. The RTX 5070 Ti, with its 16 GB of GDDR7 memory and 896.0 GB/s bandwidth, is clearly the limiting component at this resolution, as the CPU has less overhead to hide the increased pixel processing demands.
Considering the Low preset, the scaling is even more pronounced. At 1080p Low, the system achieves 442 FPS, but this falls to 279 FPS at 1440p and 146 FPS at 4K. The margin between 1080p and 1440p Low is 163 FPS, which is a larger absolute drop than the 129 FPS drop seen between the same resolutions on High. This suggests that at lower settings, the CPU is working at its maximum capacity to feed frames, and any increase in resolution immediately exposes the GPU as a bottleneck. The data shows that for players targeting the highest refresh rates, 1080p is the only viable option, as the CPU can push framerates well beyond what most high-refresh monitors can display.
At the Ultra preset, the GPU's burden becomes the dominant factor. The average FPS at 4K Ultra is 81, which is a 70% reduction from the 4K High result. This indicates that the Ultra preset introduces effects that are particularly taxing on the GPU's shading units and ray tracing cores, pushing the RTX 5070 Ti to its limits. The scaling from 1080p Ultra (246 FPS) to 1440p Ultra (155 FPS) and then to 4K Ultra (81 FPS) shows a consistent, steep decline that points to a pure GPU-bound scenario at 4K.
Settings Recommendations
The measured data provides a clear hierarchy of performance across presets. At 4K, the High preset offers a playable average of 116 FPS, which is a significant improvement over the 81 FPS achieved on Ultra. Given that the minimum FPS is not recorded for High, the Medium preset, with a recorded minimum of 108 FPS, provides a more stable baseline for 4K gaming. The difference between Medium (127 FPS) and High (116 FPS) at 4K is modest, suggesting that High is the better choice for visual fidelity without a major performance penalty, provided the framerate is acceptable.
For 2560x1440, the High preset delivers a superb 221 FPS average. This is well above the threshold for high-refresh-rate gaming. While the Ultra preset still manages a respectable 155 FPS, the jump from Medium (243 FPS) to High (221 FPS) is a smaller relative cost than the jump from High to Ultra (221 to 155 FPS). Therefore, High is recommended as the sweet spot for 1440p, balancing visual quality with a framerate that leaves headroom for any demanding scenes.
At 1920x1080, even the Ultra preset produces 246 FPS, which is exceptionally high. The Medium preset, with a recorded maximum of 443 FPS and a minimum of 328 FPS, shows excellent consistency. The data suggests that at 1080p, users can freely select the Ultra preset without concern for playability, as the CPU is the primary bottleneck and the GPU has ample resources. The Low preset's 442 FPS average offers no real-world benefit over Ultra’s 246 FPS unless the goal is to minimize input latency for competitive play, where every frame counts.
The most efficient experience per the measured rows is at 1440p High, where the system achieves 221 FPS. This represents a strong equilibrium where the GPU is sufficiently utilized to produce high visual quality, and the CPU is not overburdened. The 4K High preset is also viable, but the 116 FPS average is closer to the edge of what is considered optimal for fast-paced tactical gameplay.
FAQ
Q: What is the best resolution to use with this CPU and GPU combo for a high-refresh-rate monitor?
A: Based on the measured data, 2560x1440 on High settings provides 221 FPS, which is ideal for monitors with refresh rates up to 240Hz. At 1920x1080, the system exceeds 350 FPS on High, but the visual detail is lower, making 1440p the superior choice for image quality and performance balance.
Q: How much performance is lost when switching from 1080p to 4K?
A: At High settings, the average framerate drops from 350 FPS at 1920x1080 to 116 FPS at 3840x2160, representing a 67% reduction in performance. This large gap indicates a significant increase in GPU load at 4K.
Q: Is the RTX 5070 Ti a bottleneck at 4K resolution in Ready Or Not?
A: Yes, the data indicates a GPU bottleneck at 4K. The framerate scaling from 1440p to 4K shows a drop from 221 FPS to 116 FPS on High, which is a far steeper decline than the CPU could cause. The GPU is processing the higher pixel count and advanced effects at its limit.
Q: Can the Intel Core i7-14700KF keep up with the RTX 5070 Ti at lower resolutions?
A: At 1080p, the system reaches 442 FPS on Low settings, which is an extremely high framerate that suggests the CPU is the main limiting factor. The CPU is capable of feeding the GPU at very high rates, but it prevents the GPU from reaching even higher framerates at this resolution.
Q: What is the performance difference between the Ultra and High presets at 1440p?
A: The Ultra preset averages 155 FPS, while the High preset averages 221 FPS at 2560x1440. This is a 66 FPS difference, or a 30% performance decrease for the Ultra preset, which suggests that the additional visual features have a high rendering cost.
Q: Does the Medium preset offer a more stable experience than High at 4K?
A: The Medium preset at 4K has a recorded minimum FPS of 108, while the High preset does not have a recorded minimum. The Medium preset's average of 127 FPS and a floor of 108 FPS provides a more predictable performance envelope, which can be crucial for maintaining smooth gameplay in a tactical shooter.
Measured FPS Breakdown
At 1920x1080, the system's performance is exceptional across all presets. The Low preset yields an average of 442 FPS, while Medium produces 385 FPS with a minimum of 328 and a maximum of 443 FPS. High settings average 350 FPS, and Ultra settings average 246 FPS. The data shows a clear trend: the CPU is the primary driver at this resolution, as the framerate is consistently high and the GPU is not fully saturated.
Moving to 2560x1440, the framerates remain very high but begin to show the GPU's influence. Low settings average 279 FPS, Medium averages 243 FPS (min 207, max 280), High averages 221 FPS, and Ultra averages 155 FPS. The gap between High and Ultra is 66 FPS, which is the largest single-preset jump at this resolution, indicating that the Ultra preset's additional effects are particularly demanding on the GPU's compute resources.
At 3840x2160, the GPU becomes the clear bottleneck. Low settings average 146 FPS, which is a significant drop from the 279 FPS at 1440p. Medium settings average 127 FPS with a minimum of 108 and a maximum of 146 FPS. High settings average 116 FPS, and Ultra settings drop to 81 FPS. The scaling from 1440p to 4K at High settings (221 to 116 FPS) shows a 47% reduction, which is consistent with a GPU-bound workload where the pixel fill rate and memory bandwidth are the limiting factors.
The data also reveals that the Medium preset at 4K provides a minimum FPS of 108, which is close to the average of the High preset. This suggests that for players seeking a consistent experience at 4K, Medium might be a safer choice than High, as it has a recorded floor that is only 19 FPS below its average.
GPU Role
The NVIDIA GeForce RTX 5070 Ti is the central component in determining performance at higher resolutions and presets. Its 16 GB of GDDR7 memory on a 256-bit bus provides 896.0 GB/s of bandwidth, which is critical for handling the high-resolution textures and complex lighting in Ready Or Not. The GPU's 96 ROPs and 280 TMUs are tasked with pixel and texture processing, respectively, and the data shows that they are saturated at 4K, especially on the Ultra preset.
The GPU's boost clock of 2452 MHz and its Blackwell 2.0 architecture with 70 RT cores and 280 tensor cores are responsible for the advanced visual effects. The Ultra preset's significant performance cost (81 FPS at 4K vs. 116 FPS on High) indicates that these cores are heavily utilized for ray-traced effects and high-fidelity shading. The GPU's 43.94 TFLOPS of FP32 compute power is substantial, but the demands of 4K Ultra in this game exceed its capacity to maintain high framerates.
In contrast, at 1080p, the GPU's role is diminished. The framerate is so high that the GPU is often waiting for the CPU to send data. The difference between Low (442 FPS) and Ultra (246 FPS) at 1080p is a 196 FPS gap, which shows that the GPU's rendering settings still have a significant impact, but the overall performance is not constrained by its maximum throughput. The RTX 5070 Ti's 3DMark Steel Nomad score of 6604 and its 86th percentile ranking among all GPUs demonstrate its high-end positioning, but the game's engine is capable of pushing it to its limits at 4K.
CPU Role
The Intel Core i7-14700KF plays a crucial role in maintaining high framerates, particularly at lower resolutions. With 20 cores and 28 threads, it has substantial multi-threading capabilities for handling game logic, AI, and physics. Its boost clock of 5.60 GHz provides excellent single-thread performance, which is essential for the main game thread. The CPU's 33 MB of shared L3 cache helps reduce memory latency and improve data throughput.
The benchmark data shows the CPU's influence most clearly at 1080p. On Low settings, the system achieves 442 FPS, which is a framerate that exceeds the refresh rate of most monitors. This high number suggests that the CPU is the limiting factor, as the GPU could likely render more frames if the CPU could supply them faster. The CPU's Cinebench R23 multi-core score of 44167 and single-core score of 6235 indicate it is a top-tier processor, and its Passmark single-thread score of 4480 confirms its strength in lightly-threaded workloads.
As resolution increases, the CPU's role becomes less dominant. At 4K, the framerate is primarily determined by the GPU, but the CPU must still be fast enough to avoid introducing stutters. The minimum FPS recorded on Medium at 4K is 108 FPS, which suggests that the CPU is capable of maintaining a consistent frame delivery even when the GPU is under heavy load. The CPU's 94th percentile ranking among all processors and its average benchmark score of 70163 place it just above rivals like the AMD Ryzen 9 7950X and Intel Core Ultra 7 265K, with a deltaPct of 0.9% and -1%, respectively. This indicates that while the CPU is not the bottleneck at 4K, its performance headroom ensures it does not become a limiting factor in any scenario.
How This Combo Ranks
In the comprehensive database of tested computer combinations, this specific pairing of the Intel Core i7-14700KF and NVIDIA GeForce RTX 5070 Ti ranks 403rd out of 3714 combos for Ready Or Not. This places it in the top 11% of all tested systems, indicating a very high level of performance. The rank reflects the combination's ability to deliver playable framerates at all resolutions, with exceptional performance at 1080p and 1440p.
The combo's ranking is a result of both components being high-end. The CPU's position in the 94th percentile and the GPU's position in the 86th percentile contribute to a balanced system that does not have a significant bottleneck at common gaming resolutions. While the GPU is the limiting factor at 4K Ultra, the overall performance is still strong enough to rank highly. The data indicates that this combo is better suited for high-refresh-rate 1440p gaming than for 4K Ultra, where the GPU's limitations are more apparent. However, the 403rd rank out of 3714 combos shows that it outperforms the vast majority of systems tested, including those with lower-tier CPUs or GPUs. This ranking is a strong indicator of the combo's capability to handle a demanding title like Ready Or Not with high settings and smooth gameplay.
Hardware Specifications
Intel Core i7-14700KF
NVIDIA GeForce RTX 5070 Ti
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i7-14700KF + NVIDIA GeForce RTX 5070 Ti in Ready Or Not
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 146.0 |
| 3840x2160 | Medium | 127.0 |
| 3840x2160 | High | 116.0 |
| 3840x2160 | Ultra | 81.0 |
| 2560x1440 | Low | 279.0 |
| 2560x1440 | Medium | 243.0 |
| 2560x1440 | High | 221.0 |
| 2560x1440 | Ultra | 155.0 |
| 1920x1080 | Low | 442.0 |
| 1920x1080 | Medium | 385.0 |
| 1920x1080 | High | 350.0 |
| 1920x1080 | Ultra | 246.0 |
Ready Or Not with ii7-14700KF + Other GPUs
See how Ready Or Not performs with the same CPU but different graphics cards.
Ready Or Not with RTX 5070 Ti + Other CPUs
See how Ready Or Not performs with the same GPU but different processors.
Other Games with ii7-14700KF + RTX 5070 Ti
Explore FPS benchmarks for other games using this same hardware combination.