Ready Or Not

The Intel Core i7-14700KF and NVIDIA GeForce RTX 4070 Ti combination delivers a remarkably consistent performance curve in Ready Or Not, with the data indicating that the system scales predictably as resolution increases. At 1080p with Low settings, the combo produces 430 FPS, which drops to 272 FPS at 1440p and further to 142 FPS at 4K. This represents a 37% reduction in frame rate when moving from 1080p to 1440p, and a 67% reduction from 1080p to 4K. The scaling pattern suggests that at lower resolutions, the CPU is providing ample headroom, while the GPU becomes increasingly dominant as pixel count rises. The High preset shows similar scaling behavior: 341 FPS at 1080p, 215 FPS at 1440p, and 113 FPS at 4K, which translates to a 37% drop from 1080p to 1440p and a 67% drop from 1080p to 4K. This consistent percentage decrease across presets indicates a well-balanced system where neither component becomes a sudden bottleneck at any particular resolution. The 4K Ultra result of 79 FPS is notably lower than the 4K High result, suggesting that the Ultra preset introduces effects that disproportionately impact GPU workload. The frame rate deltas between presets widen at 4K compared to 1080p, which is typical behavior for a GPU-bound scenario at higher resolutions.

Resolution Scaling

The measured data reveals that Ready Or Not becomes progressively more GPU-limited as resolution increases, but the i7-14700KF maintains sufficient processing power to avoid becoming a limiting factor even at 1080p. At 1080p Low, the system achieves 430 FPS, a figure that far exceeds the refresh rate capabilities of most displays, indicating that the CPU is not being overtaxed. Moving to 1440p Low, the frame rate drops to 272 FPS, a 37% reduction that aligns closely with the increased pixel count of 78% more pixels than 1080p; this discrepancy suggests that the GPU is still not fully saturated at 1440p. The 4K Low result of 142 FPS represents a 48% drop from 1440p, which is smaller than the 125% pixel increase would suggest, indicating that the GPU is beginning to become the primary constraint at this resolution. When examining the Medium preset, the min FPS values provide additional insight: at 4K Medium, the minimum frame rate is 105 FPS with a maximum of 142 FPS, while at 1440p Medium, the minimum is 201 FPS with a maximum of 272 FPS, and at 1080p Medium, the minimum is 319 FPS with a maximum of 432 FPS. These min-max ranges show that frame time consistency degrades as resolution increases, which is expected for a GPU-bound workload. The Ultra preset exhibits the most dramatic scaling: 240 FPS at 1080p, 151 FPS at 1440p, and 79 FPS at 4K. The 4K Ultra result is particularly telling, as it falls below 80 FPS, which suggests that the Ultra settings include features that are particularly demanding at high resolutions. Overall, the scaling analysis indicates that the system is CPU-limited at 1080p and increasingly GPU-limited as resolution rises, with the crossover point occurring somewhere between 1440p and 4K.

GPU Role

The NVIDIA GeForce RTX 4070 Ti serves as the primary driver of frame rate in Ready Or Not at higher resolutions, and its specifications explain the observed performance levels. The GPU features 12 GB of GDDR6X memory on a 192-bit bus, providing 504.2 GB/s of memory bandwidth, which is sufficient for the texture and geometry demands of this tactical shooter. The AD104 chip operates at a base clock of 2310 MHz and boosts to 2610 MHz, with memory running at 1313 MHz or 21 Gbps effective, and these clock speeds contribute to the GPU's 40.09 TFLOPS of FP32 compute performance. The RTX 4070 Ti's 7680 shading units, 240 texture mapping units, and 80 render output units provide the raw processing power needed to maintain high frame rates across all measured resolutions. The GPU's 60 RT cores and 240 tensor cores are relevant for ray-traced effects and DLSS, though the measured data does not specify whether these features were enabled. The pixel rate of 208.8 GPixel/s and texture rate of 626.4 GTexel/s indicate that the GPU can handle high-resolution rendering without becoming texture-bound. In the context of Ready Or Not, which is a tactical shooter with detailed environments and multiple AI characters, the RTX 4070 Ti's 12 GB VRAM capacity proved adequate, as evidenced by the frame rates achieved at 4K Ultra. The GPU's performance percentiles place it at the 84th percentile among all GPUs, with an average benchmark score of 44795, which is competitive with the NVIDIA GeForce RTX 5090 Mobile (0.8% lower score), AMD Radeon Pro 5500 XT (1.3% lower), and Intel Arc A730M (1.7% lower), while being 1.6% ahead of the NVIDIA RTX A6000.

How This Combo Ranks

The combination of the Intel Core i7-14700KF and NVIDIA GeForce RTX 4070 Ti ranks 514th out of 3714 tested combos in Ready Or Not, placing it in the top 14% of all configurations in the database. This ranking is notable because it indicates that the combo outperforms the vast majority of tested systems, despite not featuring the absolute latest hardware. The i7-14700KF itself holds the 94th percentile among all CPUs, with an average benchmark score of 70163, placing it just 0.2% ahead of the AMD Ryzen 7 9700F and 0.4% ahead of the AMD Ryzen 9 7940HX, while trailing the Intel Core Ultra 7 265K by 1%. The RTX 4070 Ti holds the 84th percentile among GPUs, and its rank of 514 out of 3714 combos suggests that the GPU is the more limiting factor in this pairing, as the CPU's higher percentile would typically allow it to pair with a more powerful GPU to achieve a higher combo rank. The data implies that in Ready Or Not specifically, the combo's performance is constrained by the GPU at higher resolutions, while at 1080p, the CPU's capabilities are not fully utilized. The combo's ranking relative to other tested combinations indicates that users with this hardware can expect strong performance in this game, but there is headroom for improvement if the GPU were upgraded. The rank of 514 out of 3714 also suggests that the vast majority of tested combos produce lower frame rates, which is consistent with the high FPS figures measured across all resolution and settings combinations.

Measured FPS Breakdown

At 1920x1080, the combo delivers exceptional performance across all settings. The Low preset achieves 430 FPS, the Medium preset delivers 375 FPS with a minimum of 319 FPS and a maximum of 432 FPS, the High preset produces 341 FPS, and the Ultra preset reaches 240 FPS. These figures indicate that at 1080p, the system is not stressed, and even the most demanding Ultra settings maintain frame rates well above 200 FPS. The difference between Low and Ultra at 1080p is 190 FPS, representing a 44% reduction, which shows that the Ultra preset has a significant impact on performance even at this resolution. At 2560x1440, the performance remains strong but shows the expected decline. The Low preset achieves 272 FPS, Medium delivers 237 FPS with a minimum of 201 FPS and a maximum of 272 FPS, High produces 215 FPS, and Ultra reaches 151 FPS. The gap between Low and Ultra at 1440p is 121 FPS, a 44% reduction, which is proportionally similar to the 1080p result. The 1440p Medium minimum of 201 FPS indicates that even in demanding scenes, the system maintains high frame rates. At 3840x2160, the performance drops more substantially. The Low preset achieves 142 FPS, Medium delivers 124 FPS with a minimum of 105 FPS and a maximum of 142 FPS, High produces 113 FPS, and Ultra reaches 79 FPS. The difference between Low and Ultra at 4K is 63 FPS, representing a 44% reduction, which is consistent with the other resolutions. The 4K Medium minimum of 105 FPS is notable, as it indicates that even at 4K, the system can maintain frame rates above 100 FPS in most scenarios with Medium settings. The Ultra preset at 4K is the only configuration that falls below 80 FPS, suggesting that users seeking high frame rates at 4K should consider the High preset or lower.

CPU Role

The Intel Core i7-14700KF provides the processing foundation for this combo, and its specifications are well-suited for Ready Or Not's CPU demands. The processor features 20 cores and 28 threads, with a base clock of 3.40 GHz and a boost clock of 5.60 GHz, which provides substantial multi-threaded performance for handling game logic, AI, and physics calculations. The Raptor Lake architecture, built on Intel's 10 nm process, includes 80 KB of L1 cache per core, 2 MB of L2 cache per core, and 33 MB of shared L3 cache, which helps reduce memory latency in CPU-intensive scenes. The CPU supports DDR4 and DDR5 memory in a dual-channel configuration, allowing for flexible system builds. In benchmark tests, the i7-14700KF achieves a Cinebench R23 multi-core score of 44167 and a single-core score of 6235, indicating strong performance in both multi-threaded and single-threaded workloads. The Geekbench multi-core score of 21462 and single-core score of 2578 further confirm the CPU's capabilities. The PassMark multi-thread score of 52425 and single-thread score of 4480 demonstrate that the CPU excels at both parallel and sequential tasks. In the context of Ready Or Not, which is a tactical shooter that requires AI processing for enemy and civilian behavior, the CPU's 20 cores provide ample headroom. The measured FPS at 1080p Low of 430 FPS suggests that the CPU is not a bottleneck at lower resolutions, as the frame rate is limited by the GPU's rendering capabilities rather than CPU processing. The CPU's percentile rank of 94 among all CPUs places it ahead of the AMD Ryzen 7 9700F by 0.2%, the AMD Ryzen 9 7940HX by 0.4%, and the AMD Ryzen 9 7950X by 0.9%, while trailing the Intel Core Ultra 7 265K by 1%. This positioning indicates that the i7-14700KF is a high-end processor that provides more than sufficient performance for this game.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend on the user's resolution and performance preferences. At 1080p, the High preset delivers 341 FPS, which is more than sufficient for any display refresh rate, while the Ultra preset at 240 FPS still provides an excellent experience. The Medium preset at 375 FPS offers a middle ground, but the High preset appears to provide the best balance of visual quality and performance at 1080p, as the jump from High to Ultra costs 101 FPS while likely providing diminishing visual returns. At 1440p, the High preset achieves 215 FPS, which is ideal for high-refresh-rate monitors, while the Ultra preset at 151 FPS still maintains smooth gameplay. The Medium preset at 237 FPS is also viable, but the High preset's 215 FPS is recommended for users with 144Hz or 165Hz displays, as it provides a significant visual improvement over Medium with only a 22 FPS penalty. At 4K, the recommendations shift more significantly. The High preset at 113 FPS is the recommended choice for users with 120Hz displays, as it provides smooth gameplay while maintaining high visual fidelity. The Medium preset at 124 FPS offers a slight performance boost but with reduced visual quality, while the Ultra preset at 79 FPS may be acceptable for users with 60Hz displays who prioritize visual quality over frame rate. The data shows that the Low preset at 4K achieves 142 FPS, which is surprisingly high and indicates that even at minimum settings, the game remains playable at 4K. For the best overall experience, the High preset is recommended at all resolutions, as it consistently provides frame rates that are 30-50% higher than Ultra while maintaining good visual quality. The Ultra preset is only recommended for users with lower refresh rate displays or those who prioritize maximum visual fidelity over performance. The Medium preset serves as a good fallback for users who need additional performance headroom, particularly at 4K where the difference between Medium and High is only 11 FPS.