Ready Or Not

Ready Or Not

AVERAGE FPS
167
excellent

This combination delivers exceptional performance with an average of 167 FPS, perfect for high refresh rate gaming and competitive play.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 58 83 91 105
1440p QHD 111 159 174 200
1080p Full HD 177 251 276 317

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 105
3840x2160 Medium 91
3840x2160 High 83
3840x2160 Ultra 58
2560x1440 Low 200
2560x1440 Medium 174
2560x1440 High 159
2560x1440 Ultra 111
1920x1080 Low 317
1920x1080 Medium 276
1920x1080 High 251
1920x1080 Ultra 177

Ready Or Not with Intel Core i3-12100F + NVIDIA GeForce RTX 3070 Ti, In-Depth Analysis

The Intel Core i3-12100F paired with the NVIDIA GeForce RTX 3070 Ti is a study in asymmetric balance. The data places this combination at rank 1332 out of 3714 tested combos in Ready Or Not, placing it in the top 36% of all systems tracked. This is a configuration that clearly favors the graphics card, yet the 4-core CPU manages to keep pace at higher resolutions where the GPU becomes the primary bottleneck. Benchmark results indicate a system that is highly capable for tactical shooter gameplay, though its performance envelope is defined by the processor's modest core count.

How This Combo Ranks

The comboRankInGame field places this specific pairing at position 1332 out of 3714 total tested combinations. That puts this system in the 64th percentile of all tracked hardware pairings, meaning roughly two-thirds of tested combos rank lower. The ranking reflects a system that handles Ready Or Not well, but it is not at the top tier where high-core-count CPUs paired with flagship GPUs dominate.

The i3-12100F itself holds a percentileVsAllCpus score of 68, indicating it outperforms about 68% of all CPUs in the database. Its average benchmark score of 13494 sits within 0.3% of the Intel Core i5-9500, and it is effectively tied with the Intel Core 3 N355 at a deltaPct of 0. The processor also edges out the Intel Core i7-1250U by 1.1%. However, the Core 5 120UL is 0.7% ahead, showing that the i3-12100F sits in a tightly contested mid-range CPU segment.

On the GPU side, the RTX 3070 Ti holds a percentileVsAllGpus of 75, outperforming 75% of all graphics cards tracked. Its average benchmark score of 29945 places it within 0.1% of the RTX 5070 Mobile and 0.5% of the RTX 2080 Ti. The AMD Radeon RX 6800 is 0.5% ahead, while the RX 6700 leads by 1.6%. These margins are small, indicating that the 3070 Ti is a well-established performer whose position in the hierarchy has not shifted dramatically.

The combination of a 68th-percentile CPU with a 75th-percentile GPU yields a system that ranks in the top 36% of all combos in this specific game. This suggests that Ready Or Not is not exceptionally CPU-demanding, allowing the i3-12100F to punch slightly above its weight class when paired with a stronger GPU.

GPU Role

The RTX 3070 Ti brings 8 GB of GDDR6X memory across a 256-bit bus, delivering 608.3 GB/s of bandwidth. The memory clock runs at 1188 MHz, which translates to 19 Gbps effective. The GPU operates at a base clock of 1575 MHz and boosts to 1770 MHz. These specifications are central to understanding how the card behaves in Ready Or Not.

The 8 GB VRAM capacity is sufficient for this game's demands, as evidenced by the measured FPS data. At 4K Ultra settings, the average frame rate drops to 58 FPS, which is the most demanding scenario in the dataset. The fact that the card can maintain playable frame rates at 4K Ultra suggests that VRAM is not a limiting factor at these settings. The bandwidth figure of 608.3 GB/s is notable for a card in this tier, and benchmark results indicate that memory bandwidth is not a bottleneck even at higher resolutions.

The GPU's architecture is Ampere, built on Samsung's 8 nm process with 17,400 million transistors. With 6144 shading units, 192 texture mapping units, and 96 ROPs, the card has substantial raw compute resources. The FP32 throughput of 21.75 TFLOPS and texture rate of 339.8 GTexel/s provide the computational headroom needed for the particle effects and lighting typical of tactical shooters.

The card's 48 RT cores and 192 tensor cores are present but less relevant for this title, which does not heavily emphasize ray tracing in the measured data. The pixel rate of 169.9 GPixel/s helps explain why the card scales so well across resolutions. The RTX 3070 Ti's nearest rivals include the RTX 2080 Ti at 0.5% behind and the RX 6800 at 0.5% ahead, confirming that this GPU occupies a well-established performance tier.

Resolution Scaling

The measured FPS data reveals a clear pattern of GPU-bound scaling from 1080p to 4K. At 1080p High settings, the system produces 251 FPS average. Moving to 1440p High drops that to 159 FPS, a 37% reduction. At 4K High, the average falls to 83 FPS, which is 67% lower than the 1080p result. This steep decline indicates that the GPU is the limiting component at higher resolutions, as the CPU has ample headroom at 1080p.

The Low settings data tells a similar story. At 1080p Low, the system hits 317 FPS average. At 1440p Low, it achieves 200 FPS, and at 4K Low it drops to 105 FPS. The 4K Low figure is only 33% of the 1080p Low figure, reinforcing that resolution scaling is the dominant factor.

Medium settings show the most complete dataset, including min and max FPS values. At 1080p Medium, the average is 276 FPS with a minimum of 235 and maximum of 318. At 1440p Medium, the average is 174 FPS with a minimum of 148 and maximum of 201. At 4K Medium, the average is 91 FPS with a minimum of 77 and maximum of 105. The min-to-max spread is tight at each resolution, indicating consistent frame pacing.

Ultra settings produce the lowest frame rates. At 1080p Ultra, the average is 177 FPS. At 1440p Ultra, it is 111 FPS. At 4K Ultra, it drops to 58 FPS. The 4K Ultra figure is the only sub-60 FPS result in the entire dataset, suggesting that this is the boundary of the system's capability. The scaling from 1080p Ultra to 4K Ultra represents a 67% reduction in frame rate, consistent with the High settings scaling.

FAQ

Q: What is the best resolution to play Ready Or Not with this combo?

A: The data shows that 1440p High settings delivers 159 FPS average, which is well above the 1440p Ultra figure of 111 FPS. This suggests that High settings at 1440p offer the best balance of visual quality and frame rate. At 4K, only Medium settings (91 FPS) remain comfortably playable, while Ultra drops to 58 FPS.

Q: Is the RTX 3070 Ti's 8 GB VRAM sufficient for this game?

A: Yes, based on the measured data. The card achieves 58 FPS at 4K Ultra settings without any reported issues, and the 608.3 GB/s memory bandwidth appears adequate for the game's demands. The VRAM capacity does not appear to be a limiting factor in any of the tested configurations.

Q: How does the i3-12100F perform relative to its CPU rivals?

A: The i3-12100F has an average benchmark score of 13494, which places it within 0.3% of the Intel Core i5-9500 and 1.1% ahead of the Intel Core i7-1250U. It is effectively tied with the Intel Core 3 N355 at a deltaPct of 0, while the Intel Core 5 120UL is 0.7% ahead.

Q: What frame rate can I expect at 1080p with Ultra settings?

A: The measured data shows an average of 177 FPS at 1080p Ultra. This is more than sufficient for high-refresh-rate monitors. For comparison, 1080p High delivers 251 FPS, and 1080p Medium delivers 276 FPS.

Q: Is this system more CPU-bound or GPU-bound in Ready Or Not?

A: The data indicates the system becomes GPU-bound at higher resolutions. The FPS drops significantly from 1080p to 4K, showing that the GPU is the limiting factor. At 1080p, the CPU has enough headroom to allow the GPU to reach frame rates above 300 FPS at Low settings.

Q: How does the RTX 3070 Ti compare to the RTX 2080 Ti?

A: The RTX 3070 Ti has an average benchmark score of 29945, which is 0.5% higher than the RTX 2080 Ti's score. The two cards are effectively in the same performance tier, with the 3070 Ti holding a marginal edge.

Measured FPS Breakdown

The complete measured FPS dataset for Ready Or Not with the i3-12100F and RTX 3070 Ti is as follows.

At 1920x1080, the system produces its highest frame rates. Low settings yield an average of 317 FPS. Medium settings produce an average of 276 FPS, with a minimum of 235 and maximum of 318. High settings deliver an average of 251 FPS. Ultra settings drop to an average of 177 FPS. Across all settings at 1080p, the system stays well above 170 FPS.

At 2560x1440, the frame rates remain strong. Low settings average 200 FPS. Medium settings average 174 FPS, with a minimum of 148 and maximum of 201. High settings produce 159 FPS average. Ultra settings reduce the average to 111 FPS. The 1440p results show that the system can handle high refresh rates at this resolution with most settings.

At 3840x2160, the GPU begins to feel the load. Low settings average 105 FPS. Medium settings average 91 FPS, with a minimum of 77 and maximum of 105. High settings produce 83 FPS average. Ultra settings drop to 58 FPS average, which is the only sub-60 FPS result in the entire dataset. The 4K results demonstrate that this combo is viable for 4K gaming with adjusted settings.

The Medium settings data provides the only complete min/max/avg set at all three resolutions. At 1080p, the spread from 235 to 318 FPS represents a variance of 83 FPS. At 1440p, the spread narrows to 53 FPS (148 to 201). At 4K, the spread is 28 FPS (77 to 105). This tightening of the frame rate range at higher resolutions is consistent with GPU-bound behavior.

CPU Role

The Intel Core i3-12100F is a 4-core, 8-thread processor based on Alder Lake architecture, built on Intel's 10 nm process. It runs at a base clock of 3.30 GHz and boosts to 4.30 GHz. The processor has 12 MB of shared L3 cache, with 1.25 MB of L2 cache per core and 80 KB of L1 cache per core. Its TDP is rated at 58 W.

The CPU's benchmark results show a clear pattern. Single-thread performance is strong for its class, with a 3dmark_single_thread score of 893 and a cinebench_r23_singlecore score of 1674. Multithreaded scores are lower relative to higher-core-count rivals, with cinebench_r23_multicore at 11860 and geekbench_multicore at 7252. The passmark_multithread score of 14015 and passmark_single_thread score of 3444 further illustrate this profile.

In Ready Or Not, the CPU's role is to feed the GPU with draw calls and game logic. The data suggests that the 4-core processor does not become a bottleneck at lower resolutions, as evidenced by the high frame rates at 1080p. However, the CPU's performance ceiling is visible in the benchmark scores. The 3dmark_max_threads score of 4023 is nearly identical to the 3dmark_8_threads score of 4026, indicating that the processor's 8 threads are fully utilized but cannot scale beyond that point.

The processor's nearest rivals in the database are all close in average score. The Intel Core i5-9500 matches the i3-12100F's multithreaded performance within 0.3%, while the Intel Core 3 N355 is exactly tied. The Intel Core i7-1250U is 1.1% behind, and the Intel Core 5 120UL is 0.7% ahead. This grouping shows that the i3-12100F occupies a specific performance band that is competitive with older mainstream processors and newer low-power parts.

The CPU's 68th percentile ranking among all CPUs means it sits above most of the processor population, but well below high-end parts. In the context of Ready Or Not, this is sufficient because the game does not appear to require high core counts. The measured FPS at 1080p Low (317 FPS) suggests that the CPU can push well over 300 FPS when the GPU is not the limiting factor, which is an impressive result for a 4-core part. The combination of a strong single-thread design and a high-boost clock allows the i3-12100F to keep up with the RTX 3070 Ti in this title, even if it would struggle in more CPU-intensive games.

Hardware Specifications

Intel Core i3-12100F

Cores / Threads 4 / 8
Base Clock 3300 MHz
Boost Clock 4300 MHz
TDP 58W
Socket Intel Socket 1700
View Full CPU Details →

NVIDIA GeForce RTX 3070 Ti

VRAM 8 GB GDDR6X
Base Clock —
Boost Clock 1770 MHz MHz
TDP 290 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core i3-12100F + NVIDIA GeForce RTX 3070 Ti in Ready Or Not

Resolution Settings Avg FPS
3840x2160 Low 105.0
3840x2160 Medium 91.0
3840x2160 High 83.0
3840x2160 Ultra 58.0
2560x1440 Low 200.0
2560x1440 Medium 174.0
2560x1440 High 159.0
2560x1440 Ultra 111.0
1920x1080 Low 317.0
1920x1080 Medium 276.0
1920x1080 High 251.0
1920x1080 Ultra 177.0

Ready Or Not with ii3-12100F + Other GPUs

See how Ready Or Not performs with the same CPU but different graphics cards.

Ready Or Not with RTX 3070 Ti + Other CPUs

See how Ready Or Not performs with the same GPU but different processors.

Other Games with ii3-12100F + RTX 3070 Ti

Explore FPS benchmarks for other games using this same hardware combination.