Ready Or Not

Ready Or Not is a tactical shooter that stresses both CPU and GPU depending on the settings and resolution chosen. In this analysis, the AMD Ryzen 5 9600X and NVIDIA GeForce RTX 5060 combination demonstrates a clear shift in bottleneck behavior as workload changes, with the data revealing a system that is exceptionally fast at lower resolutions but becomes increasingly GPU-bound as pixel count rises.

Resolution Scaling

The measured FPS data shows a classic scaling pattern that identifies the RTX 5060 as the primary performance limiter as resolution increases. At 1080p with High settings, the combo produces 221.8 FPS, which is more than sufficient for high-refresh-rate monitors. Moving to 1440p drops that figure to 143.4 FPS, a reduction of roughly 35% from the 1080p result. The jump to 4K yields 72.6 FPS, which is about a 49% drop from the 1440p figure and a 67% reduction from the 1080p baseline. This steep decline indicates that the GPU's rendering throughput is the constraining factor at higher resolutions, as the CPU has less headroom to compensate.

The scaling pattern becomes even more telling when examining the Low and Ultra presets. At 1080p Low, the system achieves 284.6 FPS, which is over 28% higher than the High preset at the same resolution. This suggests that at 1080p Low, the CPU is capable of feeding the GPU at an extremely high rate, and the GPU is still able to keep pace. However, at 4K Low, the FPS drops to 92.1, a 68% reduction from the 1080p Low result. This massive drop at 4K even with minimal graphics load indicates that the GPU's raw pixel-pushing capability, not the CPU, is the limiting factor. The 4K Ultra result of 55.2 FPS reinforces this, as it is less than half of the 1080p High result, showing that the GPU is overwhelmed by the combination of high resolution and intensive settings.

CPU Role

The AMD Ryzen 5 9600X is a 6-core, 12-thread processor based on the Zen 5 architecture, built on a 4 nm process. Its base clock is 3.90 GHz with a boost clock of 5.40 GHz, and it features a 32 MB shared L3 cache. These specifications are relevant to Ready Or Not, a tactical shooter that relies on single-thread performance for game logic and AI, but also benefits from multi-core scaling for scene complexity and physics.

Benchmark data shows the CPU's strength in single-threaded tasks; its 3DMark single-thread score is 1253, and its Cinebench R23 single-core score is 3603. These are strong numbers that indicate the CPU can handle the game's primary thread without becoming a bottleneck. The multi-threaded performance is also solid, with a Cinebench R23 multi-core score of 25525 and a Passmark multithread score of 30027. The CPU's 3DMark 16-thread score of 7585 and max-thread score of 7590 suggest that the processor scales well with additional threads, but the near-identical scores between 16-thread and max-thread indicate diminishing returns beyond its 12 threads.

In the context of Ready Or Not, the CPU's role becomes more critical at lower resolutions and settings where the GPU is not the bottleneck. At 1080p Low, the system achieves 284.6 FPS, which is a very high frame rate that suggests the CPU is capable of feeding the GPU adequately. The fact that the 1080p Low result is significantly higher than the 1440p Low result (177.6 FPS) shows that the CPU is not limiting performance at 1440p either, as the frame rate drop is more attributable to the GPU's workload increase. The CPU's percentile rank of 85 vs all CPUs, and its average benchmark score of 28246, place it as a capable mid-range processor that should not hinder the RTX 5060 in this title at most settings.

How This Combo Ranks

The combination of the AMD Ryzen 5 9600X and NVIDIA GeForce RTX 5060 ranks 873 out of 1748 tested combos in Ready Or Not. This places it in the 50th percentile of all tested combinations, which is a median position. This ranking is somewhat surprising given the individual performance of the components, but it reflects the fact that many other combinations include more powerful GPUs that can push higher frame rates at 4K, where this combo is limited.

The GPU's nearest rivals provide context for its standing. The RTX 5060 has an average benchmark score of 30109, which is nearly identical to the AMD Radeon RX 7700 XT (score 30097, deltaPct 0). The RTX 5060 is also within 0.5% of the NVIDIA Tesla M60 and within 0.6% of the RTX 5070 Mobile. This indicates that the GPU is competitive with these cards in synthetic benchmarks, but the actual in-game performance at high resolutions may differ due to driver optimizations and memory bandwidth. The CPU's nearest rivals tell a similar story; the Ryzen 5 9600X has an average score of 28246, which is 0.3% ahead of the Intel Core i5-13490F and AMD Ryzen 5 230, and 0.4% behind the AMD Ryzen 7 8845HS and 0.5% behind the Intel Core i5-14500T. This places the CPU in a tight performance cluster with mid-range alternatives.

The combo's median rank suggests that while it is not a top-tier performer, it is also not a poor one. It sits in the middle of a very large field of tested configurations, which is a reasonable outcome for a mid-range CPU paired with a mid-range GPU. The rank is likely dragged down by the GPU's 8 GB VRAM and 128-bit memory bus, which become limiting factors at 4K Ultra where the system only manages 55.2 FPS.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of the combo's performance across resolutions and settings.

At 1080p, the system is extremely fast. Low settings yield 284.6 FPS, Medium 247.9 FPS, High 221.8 FPS, and Ultra 157.1 FPS. The gap between Medium and High is 26.1 FPS, while the gap between High and Ultra is 64.7 FPS. This shows that the Ultra preset imposes a significant performance penalty, likely due to increased draw distances, shadow quality, and post-processing effects. The 1080p results are all above 150 FPS, making this combo ideal for high-refresh-rate 1080p monitors.

At 1440p, the performance is still strong but drops noticeably. Low settings produce 177.6 FPS, Medium 153.9 FPS, High 143.4 FPS, and Ultra 99.6 FPS. The transition from 1080p to 1440p results in a 37.6% drop at Low settings, a 37.9% drop at Medium, a 35.3% drop at High, and a 36.6% drop at Ultra. This consistent ~35-38% reduction across all settings indicates that the GPU's pixel throughput is the limiting factor, as the relative performance drop is uniform regardless of the settings level.

At 4K, the performance becomes more constrained. Low settings yield 92.1 FPS, Medium 79.6 FPS, High 72.6 FPS, and Ultra 55.2 FPS. The drop from 1440p to 4K is severe: 48.1% at Low, 48.3% at Medium, 49.4% at High, and 44.6% at Ultra. This shows that 4K requires significantly more GPU resources, and the RTX 5060 begins to struggle, particularly at Ultra where the frame rate drops below 60 FPS. The 4K Ultra result of 55.2 FPS is the only result in the entire data set that falls below the 60 FPS threshold, making it the only scenario where the combo is not comfortably playable.

GPU Role

The NVIDIA GeForce RTX 5060 is built on the Blackwell 2.0 architecture and features 3840 shading units, 120 TMUs, and 48 ROPs. It has 30 RT cores and 120 tensor cores, which are relevant for ray tracing and DLSS features. The GPU has a base clock of 2280 MHz and a boost clock of 2497 MHz, with a memory clock of 1750 MHz (28 Gbps effective). Its memory configuration is 8 GB of GDDR7 on a 128-bit bus, providing a bandwidth of 448.0 GB/s.

The GPU's role in Ready Or Not is primarily determined by its memory subsystem and raw compute power. The 8 GB VRAM is a potential limitation at 4K Ultra, where the game likely exceeds this capacity, leading to the 55.2 FPS result. The 128-bit memory bus, despite the high GDDR7 speed, may also restrict performance at high resolutions where memory bandwidth becomes critical. The GPU's FP32 performance of 19.18 TFLOPS and texture rate of 299.6 GTexel/s are moderate for a mid-range card, and the data reflects this in the 4K results.

The GPU's benchmark scores provide context for its performance relative to rivals. Its Passmark G3D score is 20891, and its Geekbench OpenCL score is 120785. The GPU's percentile rank of 73 vs all GPUs places it in the upper quarter of all graphics cards. Its nearest rivals in terms of average benchmark score are the AMD Radeon RX 7700 XT (deltaPct 0), the AMD Radeon RX 570 (deltaPct -0.2), and the NVIDIA Tesla M60 (deltaPct 0.5). This indicates that the RTX 5060 is a solid performer in its class, but the in-game data shows that it is not sufficient for 4K Ultra in this title without compromises.

The GPU's memory bandwidth of 448.0 GB/s is a key factor in its 1080p and 1440p performance, where it is sufficient to maintain high frame rates. However, at 4K, the bandwidth becomes a bottleneck, as evidenced by the steep drop in FPS. The GPU's 8 GB VRAM also limits the ability to run Ultra settings at 4K, as the frame rate drops to 55.2 FPS, indicating that the GPU is unable to handle the increased texture and geometry data. Overall, the RTX 5060 is a capable GPU for 1080p and 1440p gaming in Ready Or Not, but its 4K performance is limited by its memory capacity and bandwidth.