Ready Or Not
This combination delivers exceptional performance with an average of 193 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 67 | 96 | 105 | 120 |
| 1440p QHD | 126 | 181 | 203 | 232 |
| 1080p Full HD | 206 | 291 | 322 | 366 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Ready Or Not with AMD Ryzen 5 7600 + NVIDIA GeForce RTX 3080 Ti, In-Depth Analysis
Ready Or Not is a tactical shooter that stresses both the CPU and GPU, and the measured data for the AMD Ryzen 5 7600 + NVIDIA GeForce RTX 3080 Ti combo shows a system that scales predictably with resolution and settings. The combination of a 6-core Zen 4 processor with a high-bandwidth Ampere GPU produces a wide range of frame rates, from very high at 1080p to merely playable at 4K Ultra. The data indicates that this pairing is well-balanced, but the specific bottlenecks shift depending on where you set the dials.
Resolution Scaling
The performance drop from 1080p to 4K is substantial and tells a clear story about component limiting. At 1080p Low, the system averages 365.9 FPS, which drops to 232 FPS at 1440p Low and further to 119.9 FPS at 4K Low. This represents a 67% reduction in frame rate from 1080p to 4K at the lowest settings, which points to the GPU becoming the primary constraint as pixel count rises. The CPU has enough headroom to feed the graphics card at lower resolutions, but the RTX 3080 Ti’s rendering workload scales heavily with resolution.
The scaling pattern becomes more pronounced at higher settings. At Ultra settings, the frame rate drops from 205.5 FPS at 1080p to 126.4 FPS at 1440p and finally to 67 FPS at 4K. The 4K Ultra result is only 33% of the 1080p Ultra figure, showing that the GPU is the clear limiting factor when both resolution and graphical fidelity are maximized. The RTX 3080 Ti, with its 12 GB of GDDR6X memory and 384-bit bus, is being pushed to its limits at 4K Ultra.
The data suggests that at 1080p, the CPU plays a more significant role. The difference between 1080p Low (365.9 FPS) and 1080p Ultra (205.5 FPS) is 160 FPS, which indicates that the GPU is still doing meaningful work, but the Ryzen 5 7600’s 5.10 GHz boost clock keeps the frame pipeline full. At 1440p, the system sits in a comfortable middle ground, with frame rates between 126.4 and 232 FPS depending on settings. This resolution appears to be the sweet spot where neither component is fully saturated, allowing the combo to deliver high refresh rate performance without the extreme GPU load seen at 4K.
FAQ
Q: Is this combo capable of 4K gaming in Ready Or Not?
A: Yes, but with caveats. At 4K High, the average frame rate is 95.9 FPS, which is playable. At 4K Ultra, the average drops to 67 FPS, which is still smooth but noticeably slower. For competitive play, dropping to 4K Low yields 119.9 FPS.
Q: How does the RTX 3080 Ti compare to its closest rival, the RTX 3090?
A: The RTX 3080 Ti’s average benchmark score is 41224, which is 0.5% lower than the RTX 3090’s 41441. In practical terms, the performance difference is negligible for this game.
Q: What is the CPU’s benchmark standing relative to similarly priced processors?
A: The Ryzen 5 7600 has an average benchmark score of 26617, which is 0.2% higher than the AMD Ryzen 7 5800X3D’s 26574 and 0.3% higher than the Intel Core i9-11900K’s 26546. It also edges out the AMD EPYC 8024P by 0.2%.
Q: Does this system hit 144 FPS at 1440p?
A: Yes, at Medium settings the average frame rate is 203.4 FPS, and at High it is 181.1 FPS. Even at Ultra, the average stays above 120 FPS at 126.4 FPS, so high-refresh monitors are well supported.
Q: What is the CPU’s single-thread performance like?
A: The Ryzen 5 7600 scores 3246 in Cinebench R23 single-core and 999 in 3DMark single-thread tests. This strong single-thread showing helps maintain high frame rates in CPU-bound scenarios.
Q: How does this combo rank among all tested configurations?
A: It ranks 485 out of 1748 combos, placing it in the upper 28% of all tested pairings for this game, indicating a solidly above-average setup.
Settings Recommendations
The measured data shows that the best experience depends on your display and preference for visual fidelity. For 1080p users, High settings at 290.8 FPS is the optimal choice, providing excellent visual quality while still leaving massive headroom above 240 Hz. Ultra at 205.5 FPS is also viable, but the visual gains over High are typically marginal in a tactical shooter, and the 85 FPS drop is not worth it for most players.
At 1440p, High settings at 181.1 FPS is the strongest recommendation. This delivers smooth motion on 144 Hz and 165 Hz monitors, with enough GPU headroom to avoid dips that would be noticeable in firefights. Medium at 203.4 FPS is a better choice for those with 200 Hz displays, while Ultra at 126.4 FPS is acceptable for slower-paced play but drops below the 144 FPS threshold that competitive players prefer.
For 4K, the decision is more nuanced. High settings at 95.9 FPS is the best balance for a 60-100 Hz display, offering a noticeable fidelity improvement over Medium’s 104.9 FPS without the severe cost of Ultra’s 67 FPS. Low at 119.9 FPS is only recommended for players who prioritize frame rate above all else, as the visual compromise is significant. Ultra at 67 FPS is playable but feels sluggish for a game that rewards precise aiming.
How This Combo Ranks
This pairing of the AMD Ryzen 5 7600 and NVIDIA GeForce RTX 3080 Ti ranks 485th out of 1748 tested combos for Ready Or Not. This places it in the top 27.7% of all configurations, which is a strong result for a mid-range CPU paired with a high-end GPU. The ranking reflects the balanced nature of the setup; the RTX 3080 Ti is not the absolute fastest GPU available, but the Ryzen 5 7600’s Zen 4 architecture ensures that it does not hold the graphics card back in most scenarios.
The data shows that this combo outperforms many configurations that might have a stronger GPU but a weaker CPU, particularly at lower resolutions where CPU speed matters more. The Ryzen 5 7600’s 6 cores and 12 threads are sufficient for Ready Or Not’s threading model, and its 5.10 GHz boost clock keeps frame pacing consistent. In terms of the overall database, this combo sits comfortably in the upper quartile, making it a dependable choice for high-refresh 1440p gaming and capable 4K play.
CPU Role
The Ryzen 5 7600 is a 6-core, 12-thread processor based on the Zen 4 (Raphael) architecture, built on a 5 nm process. Its base clock is 3.80 GHz with a boost clock of 5.10 GHz, which is critical for a tactical shooter where frame rates are often high and CPU response time matters. The CPU has 32 MB of shared L3 cache and supports DDR5 memory with a bandwidth of 83.2 GB/s, which helps feed the GPU with frame data quickly.
In Ready Or Not, the CPU’s role becomes more apparent at lower resolutions. At 1080p Low, the system hits 365.9 FPS, a figure that suggests the CPU is still managing to keep up with the GPU’s output. The single-thread performance, evidenced by a Cinebench R23 single-core score of 3246, is strong enough to handle the game’s AI and physics calculations without becoming a bottleneck. The multi-thread score of 22992 in Cinebench R23 shows that the 6 cores are also capable of handling background tasks without impacting game performance.
The CPU’s benchmark scores relative to rivals reinforce its capability. It is 0.2% faster than the Ryzen 7 5800X3D in average score, which is notable because the 5800X3D is often praised for gaming cache. This suggests that the 7600’s higher clocks compensate for the lack of 3D V-Cache in this title. The CPU also edges out the Intel Core i9-12900HK by 0.2% despite having fewer cores, again highlighting the importance of its clock speed.
Measured FPS Breakdown
The full set of measured frame rates provides a detailed picture of performance across all settings.
At 1920x1080, the system delivers its highest numbers. Low settings produce an average of 365.9 FPS. Medium settings reduce this to 322.2 FPS. High settings come in at 290.8 FPS. Ultra settings drop to 205.5 FPS. The difference between Low and Ultra is 160.4 FPS, showing that even at 1080p, the GPU is doing significant work.
At 2560x1440, the frame rates remain high. Low settings average 232 FPS. Medium settings average 203.4 FPS. High settings average 181.1 FPS. Ultra settings average 126.4 FPS. The gap between Low and Ultra here is 105.6 FPS, which indicates a more balanced workload between CPU and GPU.
At 3840x2160, the frame rates become more moderate. Low settings average 119.9 FPS. Medium settings average 104.9 FPS. High settings average 95.9 FPS. Ultra settings average 67 FPS. The drop from 1440p High to 4K High is 85.2 FPS, which confirms that the RTX 3080 Ti is the limiting factor at this resolution. The 4K Ultra result of 67 FPS is the lowest figure in the entire dataset, but it remains above the 60 FPS threshold for smooth gameplay, just barely.
Hardware Specifications
AMD Ryzen 5 7600
NVIDIA GeForce RTX 3080 Ti
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 7600 + NVIDIA GeForce RTX 3080 Ti in Ready Or Not
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 119.9 |
| 3840x2160 | Medium | 104.9 |
| 3840x2160 | High | 95.9 |
| 3840x2160 | Ultra | 67.0 |
| 2560x1440 | Low | 232.0 |
| 2560x1440 | Medium | 203.4 |
| 2560x1440 | High | 181.1 |
| 2560x1440 | Ultra | 126.4 |
| 1920x1080 | Low | 365.9 |
| 1920x1080 | Medium | 322.2 |
| 1920x1080 | High | 290.8 |
| 1920x1080 | Ultra | 205.5 |
Ready Or Not with Ryzen 5 7600 + Other GPUs
See how Ready Or Not performs with the same CPU but different graphics cards.
Ready Or Not with RTX 3080 Ti + Other CPUs
See how Ready Or Not performs with the same GPU but different processors.
Other Games with Ryzen 5 7600 + RTX 3080 Ti
Explore FPS benchmarks for other games using this same hardware combination.