Ready Or Not
This combination delivers exceptional performance with an average of 182 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 64 | 90 | 100 | 114 |
| 1440p QHD | 122 | 173 | 190 | 218 |
| 1080p Full HD | 193 | 274 | 302 | 346 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Ready Or Not with AMD Ryzen 5 7600 + AMD Radeon RX 9070, In-Depth Analysis
# Ready Or Not with AMD Ryzen 5 7600 + AMD Radeon RX 9070
The AMD Ryzen 5 7600 paired with the AMD Radeon RX 9070 delivers a remarkably consistent experience in Ready Or Not, with the measured data showing this combination ranks in the 70th percentile of all tested CPU/GPU pairs in this game at position 1127 out of 3714. Across all resolutions and settings, this system never drops below 64 FPS average, making it a strong performer for a tactical shooter that rewards stability and visibility. The data reveals a system that is heavily GPU-limited at 4K, but becomes increasingly CPU-bound at 1080p, where the Ryzen 5 7600's six-core Zen 4 architecture shows its strengths.
Resolution Scaling
The FPS drop from 1080p to 4K is substantial but not catastrophic, and the pattern across settings tells a clear story about which component is the bottleneck at each resolution. At Low settings, the average FPS falls from 346 at 1080p to 218 at 1440p, a 37% reduction, and then to 114 at 4K, a further 48% drop. This steep scaling curve indicates that at Low settings, the game is almost entirely GPU-limited, as the RX 9070's rendering workload increases dramatically with pixel count.
At High settings, the scaling is similarly pronounced: 274 FPS at 1080p drops to 173 at 1440p (37% lower) and then to 90 at 4K (another 48% reduction). The consistency of these percentage drops across Low and High presets suggests that the GPU is the primary limiting factor throughout, regardless of graphical complexity. The RX 9070's 16 GB of GDDR6 memory and 644.6 GB/s bandwidth are clearly sufficient for this game, as the bottleneck manifests in raw pixel throughput rather than memory capacity.
Ultra settings present the most dramatic scaling, with 193 FPS at 1080p falling to 122 at 1440p (37% lower) and then to 64 at 4K (48% lower again). The 4K Ultra result of 64 FPS is the only sub-70 FPS measurement in the entire dataset, indicating that this is the most demanding configuration tested. Notably, the scaling from 1440p to 4K at Ultra is steeper than the other presets, suggesting that the additional visual effects at Ultra amplify the pixel-count penalty.
Medium settings show the same relative pattern, with 302 FPS at 1080p, 190 at 1440p, and 100 at 4K. The min FPS figures at Medium reveal further insight: the minimum recorded frame rate at 1080p is 256, at 1440p it is 162, and at 4K it is 85. These minimums are 85%, 85%, and 85% of their respective averages, demonstrating that frame pacing remains consistent even when the GPU is heavily loaded. The 4K Medium min FPS of 85 is still well above playable thresholds, reinforcing that this system handles 4K gaming comfortably for this title.
CPU Role
The AMD Ryzen 5 7600 is a six-core, twelve-thread processor based on the Zen 4 Raphael architecture, manufactured on TSMC's 5 nm process. Its base clock of 3.80 GHz boosts to 5.10 GHz, and it carries 32 MB of shared L3 cache plus 1 MB of L2 per core. In synthetic benchmarks, this CPU scores 12,735 in Cinebench R23 multi-core and 1,852 in single-core, with a PassMark multi-thread score of 27,058 and a single-thread score of 3,910. These numbers place it at the 78th percentile among all CPUs, with nearest rivals including the AMD Ryzen 9 6900HX (0.2% ahead), AMD Ryzen 7 7435HS (0.3% behind), Intel Core i9-11900KF (0.4% ahead), and AMD Ryzen 5 8540U (0.5% ahead).
In Ready Or Not, the CPU's role becomes most apparent when examining the 1080p results, where the game's frame rates are high enough to potentially expose CPU limitations. At 1080p Low, the system achieves 346 FPS average, which is an extremely high frame rate that requires strong per-thread performance. The Ryzen 5 7600's single-thread score of 1,852 in Cinebench R23 and 3,910 in PassMark single-thread tests indicate it has the headroom to drive such high frame rates. However, the fact that the 1080p Ultra result (193 FPS) is 44% lower than 1080p High (274 FPS) suggests that even at 1080p, the GPU is still the dominant factor when settings are raised.
The 3DMark multi-thread scores provide additional context: 6,499 with 16 threads, 6,503 with max threads, and 999 in single-thread. The small difference between 16-thread and max-thread scores (6,499 vs 6,503) indicates that the CPU's 6 cores and 12 threads are fully utilized in multi-threaded workloads, but the single-thread score of 999 highlights that Ready Or Not likely benefits from the high boost clock of 5.10 GHz. The CPU's 65 W TDP and DDR5 memory support with 83.2 GB/s bandwidth further contribute to its ability to feed the GPU efficiently, though the game's data does not show any obvious CPU bottleneck even at the highest 1080p frame rates.
FAQ
Q: Can this system maintain 60 FPS at 4K Ultra in Ready Or Not?
A: Yes, barely. The measured 4K Ultra average is 64 FPS, which is just above the 60 FPS threshold. This is the only configuration in the dataset that falls below 90 FPS average, and while it is playable, players seeking a larger safety margin would prefer 4K High at 90 FPS or 4K Medium at 100 FPS.
Q: How does the Ryzen 5 7600 compare to its nearest CPU rivals?
A: The Ryzen 5 7600 sits at the 78th percentile of all CPUs. It is 0.2% behind the AMD Ryzen 9 6900HX, 0.4% ahead of the Intel Core i9-11900KF, and 0.5% ahead of the AMD Ryzen 5 8540U in average benchmark score. The differences are marginal, all within 0.5%, meaning real-world gaming performance will be virtually indistinguishable among these processors.
Q: What is the difference between 1080p Low and 1080p Ultra in terms of FPS?
A: The difference is 153 FPS. At 1080p Low, the system averages 346 FPS, while at 1080p Ultra, it averages 193 FPS. This represents a 44% reduction in frame rate when moving from the lowest to the highest preset at this resolution.
Q: Does the RX 9070's 16 GB VRAM ever become a limiting factor in this game?
A: The data does not indicate any VRAM-related bottlenecks. Frame rates scale smoothly with resolution and settings, and even the 4K Ultra configuration maintains a 64 FPS average. The 16 GB GDDR6 memory with 644.6 GB/s bandwidth appears sufficient for Ready Or Not at all tested configurations.
Q: How does the RX 9070 compare to its nearest GPU rivals?
A: The RX 9070 ranks at the 69th percentile of all GPUs. It is 0.6% ahead of the NVIDIA GeForce GTX TITAN Z, 0.8% behind the AMD Radeon RX 6800S, 1.1% ahead of the NVIDIA GeForce RTX 3080 Mobile, and 1.2% behind the NVIDIA GeForce RTX 2080 SUPER in average benchmark score. These deltas are small, indicating the RX 9070 performs in a similar class to these cards.
Q: Is the frame rate consistent, or does it vary significantly during gameplay?
A: For the Medium preset, the data shows minimum FPS values that are consistently 85% of the average across all three resolutions: 256 min vs 302 avg at 1080p, 162 min vs 190 avg at 1440p, and 85 min vs 100 avg at 4K. This consistency suggests stable frame pacing without major hitches.
Measured FPS Breakdown
At 1920x1080, the system delivers its highest frame rates across all settings. Low settings produce 346 FPS average, Medium produces 302 FPS with a minimum of 256 and maximum of 347, High produces 274 FPS, and Ultra produces 193 FPS. The Medium preset at 1080p is the most demanding configuration for which min/max data is available, showing a maximum of 347 FPS that nearly matches the Low average of 346 FPS. This suggests that the Medium preset's maximum frame rate is limited by the same factor as the Low preset's average, likely the CPU's single-thread performance.
At 2560x1440, frame rates remain very high. Low settings average 218 FPS, Medium averages 190 FPS with a minimum of 162 and maximum of 219, High averages 173 FPS, and Ultra averages 122 FPS. The Medium preset at 1440p shows a minimum of 162 FPS, which is still far above the refresh rate of most high-refresh monitors. The gap between Low and Ultra at this resolution is 96 FPS, or 44%, matching the percentage difference seen at 1080p. This consistency across resolutions indicates that the GPU's performance scaling is predictable and not subject to unexpected bottlenecks.
At 3840x2160, the system remains playable across all settings. Low settings average 114 FPS, Medium averages 100 FPS with a minimum of 85 and maximum of 114, High averages 90 FPS, and Ultra averages 64 FPS. The Medium preset's maximum of 114 FPS at 4K matches the Low preset's average exactly, again suggesting a common limiting factor. The step from High to Ultra at 4K is the largest single-setting drop in the entire dataset, falling from 90 FPS to 64 FPS, a 29% reduction. This indicates that Ultra settings introduce a significant additional GPU workload at 4K resolution, likely through advanced lighting or post-processing effects.
GPU Role
The AMD Radeon RX 9070 is built on the RDNA 4.0 architecture with the Navi 48 chip, manufactured on TSMC's 4 nm process. It features 3,584 shading units, 224 texture mapping units, and 128 ROPs, with 56 ray tracing cores. The GPU's base clock is 1330 MHz, its game clock is 2070 MHz, and its boost clock reaches 2520 MHz. It is equipped with 16 GB of GDDR6 memory on a 256-bit bus, providing 644.6 GB/s of bandwidth. The card supports PCIe 5.0 x16 and has a TDP of 220 W with a suggested PSU of 550 W.
In synthetic benchmarks, the RX 9070 scores 25,381 in PassMark G3D, 6290 in 3DMark Steel Nomad DX12, and 131,539 in Geekbench OpenCL. These results place it at the 69th percentile of all GPUs. The PassMark GPU Compute score of 14,737 indicates strong compute performance, which is relevant for a game like Ready Or Not that features physics-based interactions and destructible environments. The GPU's FP32 performance of 36.13 TFLOPS and texture rate of 564.5 GTexel/s provide ample raw throughput for this title.
The measured FPS data shows that the RX 9070 is the primary determinant of performance in Ready Or Not. Across all resolutions, the percentage difference between Low and High settings is remarkably consistent: at 1080p, Low produces 346 FPS and High produces 274 FPS (21% lower); at 1440p, Low produces 218 FPS and High produces 173 FPS (21% lower); and at 4K, Low produces 114 FPS and High produces 90 FPS (21% lower). This uniform scaling indicates that the GPU handles the additional rendering workload of High settings equally at all resolutions. The Ultra preset, however, shows a larger penalty, being 44% lower than Low at 1080p, 44% lower at 1440p, and 44% lower at 4K, suggesting a consistent but more demanding set of effects.
Settings Recommendations
For players targeting the highest frame rates, the Low preset at 1080p delivers 346 FPS, which is far beyond any display's refresh rate and provides maximum responsiveness. However, the data shows that the Medium preset at 1080p, with 302 FPS average and a minimum of 256 FPS, offers a better balance of visual quality and performance. The minimum frame rate of 256 FPS at Medium ensures that even the most demanding scenes remain well above 240 Hz refresh rates, making this the recommended preset for high-refresh 1080p monitors.
At 1440p, the Medium preset is the standout choice. With an average of 190 FPS and a minimum of 162 FPS, it provides excellent visual fidelity while maintaining frame rates that exceed the refresh rate of most 1440p gaming monitors (typically 144 Hz or 165 Hz). The High preset at 173 FPS is also viable for 144 Hz displays, but the Medium preset's higher minimum of 162 FPS offers better consistency. The Ultra preset at 122 FPS is suitable for 120 Hz displays but does not provide enough headroom for 144 Hz monitors.
At 4K, the Medium preset at 100 FPS average with an 85 FPS minimum is the recommended choice for a smooth experience on 60 Hz or 120 Hz displays. The High preset at 90 FPS is also acceptable, but the Medium preset's higher minimum frame rate of 85 FPS ensures fewer noticeable drops. The Ultra preset at 64 FPS is playable on 60 Hz displays but leaves no room for frame rate dips, so it should only be chosen if visual fidelity is the absolute priority. The Low preset at 114 FPS at 4K is not recommended, as the visual quality reduction is significant while the frame rate gain over Medium is modest (14% faster). Across all resolutions, the Medium preset consistently offers the best combination of high average FPS, high minimum FPS, and reasonable visual quality, making it the default recommendation for this system in Ready Or Not.
Hardware Specifications
AMD Ryzen 5 7600
AMD Radeon RX 9070
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 7600 + AMD Radeon RX 9070 in Ready Or Not
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 114.0 |
| 3840x2160 | Medium | 100.0 |
| 3840x2160 | High | 90.0 |
| 3840x2160 | Ultra | 64.0 |
| 2560x1440 | Low | 218.0 |
| 2560x1440 | Medium | 190.0 |
| 2560x1440 | High | 173.0 |
| 2560x1440 | Ultra | 122.0 |
| 1920x1080 | Low | 346.0 |
| 1920x1080 | Medium | 302.0 |
| 1920x1080 | High | 274.0 |
| 1920x1080 | Ultra | 193.0 |
Ready Or Not with Ryzen 5 7600 + Other GPUs
See how Ready Or Not performs with the same CPU but different graphics cards.
Ready Or Not with RX 9070 + Other CPUs
See how Ready Or Not performs with the same GPU but different processors.
Other Games with Ryzen 5 7600 + RX 9070
Explore FPS benchmarks for other games using this same hardware combination.