Ready Or Not

The AMD Ryzen 5 7400F and NVIDIA GeForce RTX 4070 combination delivers a robust 1080p and 1440p experience in Ready Or Not, with performance scaling that clearly shifts from CPU-bound at lower resolutions to GPU-bound as pixel count climbs. Across the measured settings, the combo maintains playable frame rates even at 4K, though the gap between the highest and lowest quality presets widens substantially at that resolution.

Resolution Scaling

The measured FPS data reveals a distinct pattern in how the Ryzen 5 7400F and RTX 4070 handle Ready Or Not as resolution increases. At 1080p, the combo produces remarkably high frame rates across all settings: 367 FPS on Low, 320 FPS on Medium, 291 FPS on High, and 204 FPS on Ultra. These numbers indicate that at 1080p, the system has ample headroom, and the limiting factor is not the GPU but rather the CPU’s ability to feed frames. The drop from Low to Ultra at 1080p is 163 FPS, a 44% reduction, which shows that even at lower resolutions, the game’s quality settings impose a significant load.

Moving to 1440p, the frame rates remain high but begin to show the GPU taking on more responsibility. Low settings yield 232 FPS, Medium 202 FPS, High 184 FPS, and Ultra 129 FPS. The delta between Low and Ultra here is 103 FPS, a smaller absolute gap than at 1080p but still a 44% reduction. Compared to 1080p, the 1440p scores are lower by roughly 37% on Low, 37% on Medium, 37% on High, and 37% on Ultra. This consistency suggests that the RTX 4070 is scaling predictably with pixel count, and the CPU is still not the primary bottleneck at 1440p.

At 4K (3840x2160), the picture changes decisively. The combo delivers 121 FPS on Low, 106 FPS on Medium, 96 FPS on High, and 67 FPS on Ultra. The reduction from 1440p to 4K is substantial: Low drops from 232 to 121 FPS (48% lower), Medium from 202 to 106 FPS (48% lower), High from 184 to 96 FPS (48% lower), and Ultra from 129 to 67 FPS (48% lower). This uniform drop across settings indicates that at 4K, the GPU is now the clear limiting component. The 4K Ultra score of 67 FPS is the only measured result below 90 FPS, and it highlights that while the combo can handle 4K, the highest quality preset pushes the RTX 4070 to its limits.

The scaling pattern also reveals that Ready Or Not responds more to resolution changes at lower settings. From 1080p Low (367 FPS) to 4K Low (121 FPS), the drop is 246 FPS (67% lower). In contrast, from 1080p Ultra (204 FPS) to 4K Ultra (67 FPS), the drop is 137 FPS (67% lower). The percentage reduction is identical, which suggests the game’s rendering pipeline is consistent across quality presets, but the absolute headroom at Low settings means the CPU can still push higher frame rates at 1080p and 1440p before the GPU becomes saturated.

For competitive play, the 1080p and 1440p results are more than sufficient, with even 4K Medium at 106 FPS being smooth. The 4K Ultra score of 67 FPS, while playable, is close to the threshold where some players might notice stutter in fast-paced tactical scenarios. Overall, the data shows that this combo is best suited for 1080p and 1440p, where it maintains high frame rates across all settings, while 4K is viable only at Medium or lower settings for a consistent experience.

CPU Role

The AMD Ryzen 5 7400F is a 6-core, 12-thread processor built on the Zen 4 architecture, codenamed Raphael, and fabricated on TSMC’s 5 nm process. It has a base clock of 3.70 GHz and a boost clock of 4.70 GHz, with a 65 W TDP. The CPU’s cache configuration includes 64 KB of L1 per core, 1 MB of L2 per core, and 32 MB of shared L3 cache. In Ready Or Not, the CPU’s role is most evident at 1080p, where frame rates exceed 290 FPS on High settings and reach 367 FPS on Low. These numbers suggest that the 6 cores and 12 threads are sufficient to handle the game’s AI, physics, and scene management without becoming a bottleneck at lower resolutions.

The Ryzen 5 7400F’s benchmark scores provide context for its gaming performance. In Cinebench R23, it scores 21,765 in multi-core and 3,072 in single-core. The single-core score is particularly relevant for Ready Or Not, which likely relies on a few threads for main game logic. The PassMark single-thread score of 3,689 and multithread score of 25,645 further indicate that the CPU has strong per-core performance. Compared to its nearest rivals, the Ryzen 5 7400F is nearly identical in average benchmark score: it sits 0.1% ahead of the Intel Core i5-14600T, 0.2% ahead of the Intel Core Ultra 7 155H, 0.3% ahead of the AMD Ryzen AI 7 PRO 360, and 0.2% behind the AMD Ryzen 7 PRO 6850H. This clustering means that in CPU-bound scenarios, the 7400F should perform on par with these alternatives.

The CPU’s 83rd percentile ranking among all CPUs, with an average benchmark score of 32,750, places it in the upper tier of desktop processors. For Ready Or Not, the CPU’s boost clock of 4.70 GHz is likely the key factor at 1080p, where the game can push frame rates beyond 300 FPS. The 32 MB of L3 cache also helps with data locality, reducing latency when the CPU accesses frequently used game data. At 1440p, the CPU still has enough headroom to keep up with the GPU, as evidenced by the 1440p Low score of 232 FPS, which is still high and suggests the GPU is not yet the sole limiter.

At 4K, the CPU’s role diminishes, as the GPU becomes the bottleneck. The 4K scores, ranging from 67 FPS on Ultra to 121 FPS on Low, are all lower than their 1440p counterparts, and the uniform percentage drop (48%) across settings indicates that the CPU is not holding back performance. The data shows that the Ryzen 5 7400F is a capable match for the RTX 4070 in this game, providing enough single-thread and multi-thread performance to avoid being the limiting component except at very high frame rates.

The CPU’s 6 cores and 12 threads are adequate for Ready Or Not, which is a tactical shooter that does not appear to be heavily multithreaded based on the scaling pattern. The fact that 1080p Low yields 367 FPS, which is exceptionally high, suggests that the game’s CPU demands are modest and the 7400F’s boost clock is sufficient. The CPU’s memory support for DDR5 and dual-channel configuration, with a memory bandwidth of 83.2 GB/s, also contributes to feeding the GPU efficiently, although the exact impact on Ready Or Not is not directly measurable from the provided data.

GPU Role

The NVIDIA GeForce RTX 4070 is built on the Ada Lovelace architecture, using the AD104 chip fabricated on TSMC’s 5 nm process. It has 5,888 shading units, 184 texture mapping units, and 64 ROPs, along with 46 ray tracing cores and 184 tensor cores. The GPU’s base clock is 1920 MHz, with a boost clock of 2475 MHz, and it features 12 GB of GDDR6X memory on a 192-bit bus, providing a bandwidth of 504.2 GB/s. In Ready Or Not, the GPU’s role becomes increasingly prominent as resolution rises, with the 4K results showing clear GPU-bound behavior.

At 1080p, the RTX 4070 is not fully utilized, as the CPU can generate frame rates up to 367 FPS on Low settings. The GPU’s performance at 1080p is still strong, with 204 FPS on Ultra, but the data suggests that the GPU has headroom to spare. At 1440p, the GPU begins to take on more load, with scores ranging from 129 FPS on Ultra to 232 FPS on Low. The 1440p Medium score of 202 FPS with a minimum of 172 FPS and maximum of 232 FPS shows that the GPU can maintain smooth frame rates even during intense scenes.

At 4K, the RTX 4070’s limits become apparent. The 4K Ultra score of 67 FPS is the lowest measured, and it is 48% lower than the 1440p Ultra score of 129 FPS. This drop aligns with the increased pixel count: 4K has 2.25 times the pixels of 1440p, and the frame rate reduction is consistent with that scaling. The 4K Medium score of 106 FPS, with a minimum of 90 FPS and maximum of 121 FPS, shows that the GPU can still deliver a playable experience if settings are adjusted. The 4K Low score of 121 FPS is identical to the 4K Medium maximum, indicating that the GPU’s memory bandwidth and compute capacity are the limiting factors at this resolution.

The GPU’s 12 GB of VRAM is sufficient for Ready Or Not at all tested settings, as there is no indication of memory-related stutters or crashes in the data. The GDDR6X memory, with a bandwidth of 504.2 GB/s, provides ample throughput for texture streaming at 4K Ultra, which is typically the most demanding scenario. The GPU’s 46 ray tracing cores are not directly relevant to the measured FPS, as the game’s settings do not specify whether ray tracing is enabled, but the presence of these cores means the GPU is future-proofed for titles that use the feature.

The RTX 4070’s benchmark scores place it in the 81st percentile among all GPUs, with an average score of 37,648. Its nearest rivals include the NVIDIA Tesla P4 (0.1% ahead), AMD Radeon RX Vega 56 (0.4% ahead), NVIDIA GeForce RTX 4080 Mobile (1.3% behind), and AMD Radeon PRO W6400 (1.3% ahead). These comparisons show that the RTX 4070 is a mid-to-high-tier GPU, and its performance in Ready Or Not is consistent with that positioning. The GPU’s FP32 performance of 29.15 TFLOPS and texture rate of 455.4 GTexel/s support the high frame rates observed at 1080p and 1440p, while the pixel rate of 158.4 GPixel/s helps with fill-rate-bound scenarios at 4K.

The GPU’s role in Ready Or Not is clear: it is the dominant component at 4K, where its compute and memory resources determine frame rates. At 1080p and 1440p, the GPU has enough performance to keep up with the CPU, but the scaling data shows that the GPU is not the bottleneck until higher resolutions. The RTX 4070’s 12 GB of VRAM and 504.2 GB/s bandwidth are well-matched to the game’s requirements, and the measured FPS numbers indicate that the GPU can handle the game’s highest settings at 1440p with ease, while 4K requires setting adjustments for a smooth experience.

FAQ

*Q: What is the highest average FPS achieved by this combo in Ready Or Not?*

A: The highest measured average FPS is 367, achieved at 1920x1080 resolution with Low settings.

Q: How does the combo perform at 4K Ultra settings?

A: At 3840x2160 with Ultra settings, the combo delivers an average FPS of 67, which is the lowest score across all measured configurations.

Q: Is the CPU or GPU the limiting factor at 1440p?

A: At 2560x1440, the frame rates range from 129 FPS on Ultra to 232 FPS on Low, indicating that the GPU is becoming more involved but still has headroom. The CPU is not the primary bottleneck at this resolution.

Q: What is the minimum FPS recorded for Medium settings?

A: For Medium settings, the minimum FPS values are 90 at 3840x2160, 172 at 2560x1440, and 272 at 1920x1080.

Q: How does the Ryzen 5 7400F compare to its nearest CPU rivals in average benchmark score?

A: The Ryzen 5 7400F has an average benchmark score of 32,750, which is 0.1% higher than the Intel Core i5-14600T, 0.2% higher than the Intel Core Ultra 7 155H, 0.3% higher than the AMD Ryzen AI 7 PRO 360, and 0.2% lower than the AMD Ryzen 7 PRO 6850H.

Q: What is the GPU’s average benchmark score and percentile ranking?

A: The RTX 4070 has an average benchmark score of 37,648 and ranks in the 81st percentile among all GPUs.

How This Combo Ranks

In Ready Or Not, the combination of the AMD Ryzen 5 7400F and NVIDIA GeForce RTX 4070 ranks 683rd out of 2,947 tested combos. This places the combo in the top 23% of all configurations tested for this game. The rank reflects the combo’s strong performance at 1080p and 1440p, where it achieves frame rates well above the typical playable threshold, and its capable, though not exceptional, 4K performance.

The rank of 683 out of 2,947 means that there are 682 combos that perform better in Ready Or Not, likely featuring higher-end CPUs or GPUs such as the RTX 4080 or 4090, or processors with more cores and higher boost clocks. However, the combo’s position in the upper quartile indicates that it is a well-balanced pairing for this game. The data shows that the combo excels at 1080p and 1440p, where the CPU’s 4.70 GHz boost clock and the GPU’s 2475 MHz boost clock work together to produce high frame rates.

The ranking also suggests that the combo is not held back by a significant bottleneck. At 1080p, the CPU is the limiting factor, but it still delivers over 200 FPS on Ultra settings. At 4K, the GPU is the limiting factor, but the combo still manages 67 FPS on Ultra, which is playable. This balance is reflected in the combo’s rank, which is neither near the top nor the bottom but solidly in the upper-middle range.

Compared to other combos, the Ryzen 5 7400F’s 83rd percentile among CPUs and the RTX 4070’s 81st percentile among GPUs suggest that this pairing is typical of a mid-to-high-range system. The combo’s rank of 683 is consistent with what would be expected from a 6-core CPU and a 12 GB GPU, as higher-ranked combos likely include more powerful components. The data indicates that for Ready Or Not, this combo is a reliable choice for high-refresh-rate gaming at 1080p and 1440p, with 4K being a secondary consideration.

Measured FPS Breakdown

The measured FPS data for Ready Or Not with the AMD Ryzen 5 7400F and NVIDIA GeForce RTX 4070 is as follows:

1920x1080 (1080p)

• Low settings: 367 FPS average
• Medium settings: 320 FPS average, 272 FPS minimum, 368 FPS maximum
• High settings: 291 FPS average
• Ultra settings: 204 FPS average

2560x1440 (1440p)

• Low settings: 232 FPS average
• Medium settings: 202 FPS average, 172 FPS minimum, 232 FPS maximum
• High settings: 184 FPS average
• Ultra settings: 129 FPS average

3840x2160 (4K)

• Low settings: 121 FPS average
• Medium settings: 106 FPS average, 90 FPS minimum, 121 FPS maximum
• High settings: 96 FPS average
• Ultra settings: 67 FPS average

These numbers show a clear progression: at 1080p, the combo delivers extremely high frame rates, with even Ultra settings exceeding 200 FPS. The minimum FPS values for Medium settings at 1080p (272 FPS) and 1440p (172 FPS) indicate that the combo maintains smooth performance even in demanding scenes. At 4K, the frame rates drop significantly, with Ultra settings falling to 67 FPS, which is the only measured configuration below 90 FPS.

The data also shows that the difference between Low and Ultra settings is consistent across resolutions in percentage terms. From Low to Ultra, the frame rate drops by 44% at 1080p (367 to 204 FPS), 44% at 1440p (232 to 129 FPS), and 45% at 4K (121 to 67 FPS). This consistency suggests that the game’s settings have a uniform impact on GPU load, regardless of resolution.

For players targeting high refresh rates, the 1080p and 1440p results are excellent, with even Ultra settings at 1440p (129 FPS) being well above 60 FPS. At 4K, the combo can handle Medium settings (106 FPS) comfortably, while High (96 FPS) and Ultra (67 FPS) are still playable but closer to the edge. The measured FPS breakdown confirms that this combo is best suited for 1080p and 1440p gaming, with 4K as a viable option at reduced settings.