Ready Or Not

Ready Or Not

AVERAGE FPS
274
excellent

This combination delivers exceptional performance with an average of 274 FPS, perfect for high refresh rate gaming and competitive play.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 98 139 154 176
1440p QHD 189 269 297 338
1080p Full HD 302 425 436 461

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 176
3840x2160 Medium 154
3840x2160 High 139
3840x2160 Ultra 98
2560x1440 Low 338
2560x1440 Medium 297
2560x1440 High 269
2560x1440 Ultra 189
1920x1080 Low 461
1920x1080 Medium 436
1920x1080 High 425
1920x1080 Ultra 302

Ready Or Not with AMD Ryzen 5 5500 + NVIDIA GeForce RTX 5090, In-Depth Analysis

Ready Or Not, the tactical shooter from Void Interactive, places a heavy emphasis on procedural generation and AI-driven squad tactics, which creates a unique performance profile. The pairing of the AMD Ryzen 5 5500 and the NVIDIA GeForce RTX 5090 is a stark contrast in generational and performance tiers. The data shows that this combination is capable of extraordinary frame rates, though the bottlenecks shift dramatically depending on the resolution and quality preset selected.

Resolution Scaling

The measured FPS data reveals a classic scenario where the CPU becomes the primary constraint at lower resolutions, while the GPU begins to take over as the pixel count increases. At 1080p, the system is clearly CPU-bound. The difference between Low and High settings is relatively small, with the Low preset producing 461.4 FPS and High producing 425 FPS. This narrow gap of roughly 8% suggests that the AMD Ryzen 5 5500, with its six cores and twelve threads, is hitting a ceiling in terms of how many frames it can feed to the RTX 5090. The Ultra preset at 1080p sees a significant drop to 301.6 FPS, indicating that the heavier rendering load begins to engage the GPU more substantially, but the CPU is still holding back the absolute maximum potential.

Moving to 1440p, the scaling pattern becomes more pronounced. The Low preset delivers 338.2 FPS, which is a substantial reduction from the 1080p figure, showing that the GPU is now being tasked with a significantly heavier load. The High preset at 1440p yields 269.2 FPS, and the Medium preset sits between them at 296.8 FPS. The Ultra preset at this resolution drops to 188.6 FPS, a much steeper decline than seen at 1080p. This data indicates that while the CPU is no longer the sole limiting factor, the RTX 5090's immense processing power is still not being fully saturated at these settings.

At 4K, the performance curve takes its expected shape, with the GPU becoming the definitive bottleneck. The Ultra preset, which often includes the most demanding effects like high-resolution textures and advanced shadows, produces 98 FPS. This is a massive reduction from the 1440p Ultra result of 188.6 FPS, representing a 48% drop. The High preset at 4K achieves 138.6 FPS, which is a more playable figure for a tactical shooter that benefits from precision. The Medium and Low presets at 4K deliver 154.3 FPS and 176 FPS, respectively. The scaling from 1440p to 4K at High settings shows a 48.5% performance decrease, confirming that the RTX 5090 is now working near its limits, evidence of the graphical intensity of Ready Or Not's environments.

GPU Role

The NVIDIA GeForce RTX 5090 is a behemoth built on the Blackwell 2.0 architecture, and its specifications are staggering. It features 32 GB of GDDR7 memory on a 512-bit bus, providing a bandwidth of 1.79 TB/s. This immense memory pool ensures that even the most detailed textures at 4K Ultra will not cause capacity issues, allowing the card to maintain consistent frame times without stutter from memory swapping. The GPU's boost clock is rated at 2407 MHz, and with 21,760 shading units, its raw compute power is extraordinary. The data shows that this hardware is more than capable of driving high refresh rates at 1440p, where it achieves 269.2 FPS on the High preset.

However, the benchmark results indicate that the RTX 5090's full potential is often left untapped when paired with the Ryzen 5 5500. At 1080p, the frame rates across all settings are remarkably close, ranging from 301.6 FPS at Ultra to 461.4 FPS at Low. This narrow spread is a classic sign of a CPU bottleneck, where the GPU is waiting for the processor to deliver draw calls and game logic updates. The RTX 5090 is simply too fast for the Ryzen 5 5500 to keep up with at lower resolutions. The GPU's performance only becomes the decisive factor at 4K, where the pixel workload becomes so immense that even the 104.8 TFLOPS of FP32 compute power is taxed, as evidenced by the 98 FPS result at Ultra settings. The card's 170 RT cores and 680 tensor cores are present, but their impact on this specific game's average FPS is secondary to the raw shader throughput.

CPU Role

The AMD Ryzen 5 5500 is a Zen 3 architecture processor based on the Cezanne die, manufactured on TSMC's 7 nm process. It has a base clock of 3.60 GHz and a boost clock of 4.20 GHz, with 6 cores and 12 threads. While this is a solid mid-range processor for general use, its role in this pairing is to act as the limiting factor in many scenarios. The data strongly supports this, as the frame rates at 1080p are exceptionally high but do not scale proportionally with the GPU's capabilities. The CPU has 16 MB of L3 cache, which is adequate for gaming but not exceptional, and it supports PCIe Gen 3, which could theoretically limit data transfer speeds, though this has minimal impact on gaming performance.

The benchmark results show that the Ryzen 5 5500 is unable to fully unlock the RTX 5090. At 4K, the CPU is less of a factor, and the system relies on the GPU's brute strength. However, at 1080p and even 1440p, the CPU's single-thread performance and multi-thread capabilities become the gatekeepers. The Cinebench R23 multicore score of 16,429 and single-core score of 2,319 indicate a capable processor, but the demands of a modern game engine at high frame rates require more headroom. The fact that the 1080p Low preset only achieves 461.4 FPS, while the GPU could theoretically render far more, highlights the CPU's constraint. The 3dmark 16-thread score of 5,386 shows that when all threads are utilized, the processor is competent, but the game's physics and AI calculations often rely on fewer, faster cores, which is where the 4.20 GHz boost clock may not be sufficient to keep pace with the RTX 5090's frame generation.

How This Combo Ranks

In the grand scheme of the benchmark database, this specific combination ranks 51st out of 1,748 tested combos for Ready Or Not. This places it in the top 3% of all systems tested, which is an impressive feat. However, this ranking confirms the sheer power of the RTX 5090, rather than a balanced partnership. The data suggests that the GPU is doing the heavy lifting to secure this high position, while the CPU prevents it from achieving an even higher rank.

The CPU's nearest rivals, based on average benchmark scores, include the Intel Core i5-12500 and the AMD Ryzen 5 PRO 4655GE, both with scores around 20,900, showing a delta of -0.1% against the Ryzen 5 5500's average score of 20,875. This indicates that the CPU's general processing power is on par with these other mid-range chips. The GPU, on the other hand, has an average benchmark score of 84,306, placing it in the 94th percentile of all GPUs, with its nearest rival being the NVIDIA GeForce RTX 5090 D, which is only 0.1% faster. This contrast in performance percentiles—79th for the CPU and 94th for the GPU—perfectly illustrates the imbalance. The system's rank of 51 is likely buoyed by the GPU's massive score, but a more balanced pairing, such as a higher-end CPU, would likely propel this combination much higher in the rankings.

Settings Recommendations

Based on the measured FPS data, the optimal balance between visual fidelity and performance depends heavily on the target resolution. For 4K displays, the High preset is the clear recommendation. It delivers an average of 138.6 FPS, which is well above the 60 FPS threshold for smooth gameplay and provides a significant visual upgrade over the Medium preset's 154.3 FPS. The Ultra preset at 98 FPS is still playable, but the 29% performance drop from High to Ultra is a steep price for the marginal visual gains.

For 1440p users, the Medium preset offers a superb experience at 296.8 FPS, which is more than enough for any high-refresh-rate monitor. The High preset at 269.2 FPS is also an excellent choice if you prefer sharper textures and more detailed effects. The Ultra preset at 188.6 FPS remains exceptionally smooth and is the best option for those who want maximum visual quality without sacrificing the high frame rates that give a competitive edge in a tactical shooter. At 1080p, the CPU bottleneck is so severe that even the Ultra preset cannot be fully utilized, but it still produces 301.6 FPS, making it the best choice for those with the fastest displays, as the visual improvements are essentially free given the CPU limitation.

Hardware Specifications

AMD Ryzen 5 5500

Cores / Threads 6 / 12
Base Clock 3600 MHz
Boost Clock 4200 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce RTX 5090

VRAM 32 GB GDDR7
Base Clock —
Boost Clock 2407 MHz MHz
TDP 575 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 5500 + NVIDIA GeForce RTX 5090 in Ready Or Not

Resolution Settings Avg FPS
3840x2160 Low 176.0
3840x2160 Medium 154.3
3840x2160 High 138.6
3840x2160 Ultra 98.0
2560x1440 Low 338.2
2560x1440 Medium 296.8
2560x1440 High 269.2
2560x1440 Ultra 188.6
1920x1080 Low 461.4
1920x1080 Medium 436.4
1920x1080 High 425.0
1920x1080 Ultra 301.6

Ready Or Not with Ryzen 5 5500 + Other GPUs

See how Ready Or Not performs with the same CPU but different graphics cards.

Ready Or Not with RTX 5090 + Other CPUs

See how Ready Or Not performs with the same GPU but different processors.

Other Games with Ryzen 5 5500 + RTX 5090

Explore FPS benchmarks for other games using this same hardware combination.