Ready Or Not

# Ready Or Not with AMD Ryzen 5 3600 + NVIDIA GeForce RTX 2060

The AMD Ryzen 5 3600 paired with the NVIDIA GeForce RTX 2060 delivers a surprisingly capable Ready Or Not experience across most resolutions, but the data reveals a system that hits its ceiling at 4K Ultra while remaining comfortably playable at 1080p and 1440p. With a combo rank of 1430 out of 1748 tested configurations, this pairing sits in the lower-middle tier of the database, yet the measured frame rates tell a more nuanced story than the raw ranking suggests. The 6-core, 12-thread Zen 2 processor with a 3.60 GHz base and 4.20 GHz boost clock complements the Turing-based GPU with 6 GB of GDDR6 memory, creating a balanced foundation that scales predictably as settings and resolution increase.

Settings Recommendations

The measured data across four presets at three resolutions indicates that High settings provide the most consistent experience relative to the hardware's capabilities. At 1080p, High delivers 159.6 FPS, which drops to 103.5 FPS at 1440p and 56.5 FPS at 4K. This progression shows a system that maintains playability through 1440p but begins to strain at 4K. Medium settings offer a modest improvement—176.9 FPS at 1080p, 110.9 FPS at 1440p, and 59 FPS at 4K—but the gains over High are marginal at lower resolutions while the 4K delta remains slim.

Low settings push frame rates to 204.6 FPS at 1080p and 128.2 FPS at 1440p, but the visual compromise in a tactical shooter where target identification matters makes this preset less desirable. Ultra settings, conversely, exact a heavy toll: 116.9 FPS at 1080p, 74.5 FPS at 1440p, and 36.5 FPS at 4K. The 4K Ultra figure falls below the commonly accepted threshold for smooth play, making it impractical for serious play. The data suggests High represents the sweet spot—it preserves visual fidelity while keeping frame rates well above 100 FPS at 1080p and 1440p, with 4K remaining borderline but functional at 56.5 FPS.

GPU Role

The RTX 2060's 6 GB of GDDR6 memory on a 192-bit bus provides 336.0 GB/s of bandwidth, which the measured results show is adequate for 1080p and 1440p but becomes a limiting factor at 4K. The GPU's boost clock of 1680 MHz and 1920 shading units drive the rendering workload, and the frame rate scaling from 1080p to 4K at High settings—159.6 to 56.5 FPS—represents a 64.6% drop, indicating the GPU is the primary bottleneck at higher resolutions.

The 30 RT cores and 240 tensor cores suggest Ray Tracing and DLSS capabilities, though the measured data does not include those features enabled. The GPU's 6.451 TFLOPS FP32 performance places it in the mid-range tier, and its percentile ranking of 58 versus all GPUs confirms this positioning. Comparing to nearest rivals, the RTX 2060 sits within 1.8% of the AMD Radeon Pro W5500 and 0.5% ahead of the RX 7600S, showing that this GPU holds its own against contemporary competitors.

At 4K Ultra, the 36.5 FPS result indicates the GPU is overwhelmed by the combination of high resolution and maximum settings. The 6 GB VRAM capacity likely contributes to this shortfall, as modern tactical shooters at 4K Ultra can exceed this allocation. The GPU's 58th percentile ranking versus all GPUs reinforces that this is a mid-tier part, and the data shows it performs accordingly.

CPU Role

The Ryzen 5 3600's 6 cores and 12 threads, based on the Zen 2 architecture on TSMC's 7 nm process, provide solid multi-threaded performance that the benchmark data shows is well-matched to this GPU. The CPU's boost clock of 4.20 GHz and 32 MB of shared L3 cache help maintain consistent frame delivery, particularly at lower resolutions where CPU overhead is more impactful.

The processor's benchmark scores demonstrate its capabilities: a Cinebench R23 multi-core score of 15045 and single-core score of 2124. The 3DMark 16-thread score of 4605 versus single-thread score of 696 shows strong scaling across cores. The CPU holds a 76th percentile ranking versus all CPUs, with its nearest rival being the Intel Core i5-11400 at a delta of -0.1%, indicating these two processors are effectively tied in performance.

In Ready Or Not, the CPU's role becomes evident when examining frame rates at 1080p Low (204.6 FPS) versus 4K Low (68.9 FPS). The substantial 135.7 FPS difference at Low settings suggests the game becomes increasingly GPU-bound as resolution rises, while at 1080p the CPU is capable of feeding the GPU adequately. The 12 threads help with the game's AI and physics calculations, and the data shows no signs of CPU-induced stuttering or frame drops at any tested configuration.

How This Combo Ranks

This combination ranks 1430 out of 1748 tested combos, placing it in the 18th percentile of all configurations in the database. This ranking might seem low given the playable frame rates, but it reflects the competitive landscape where newer and higher-end parts dominate the upper tiers. The Ryzen 5 3600's 76th percentile CPU ranking and the RTX 2060's 58th percentile GPU ranking combine to place this system firmly in the mid-range segment.

The CPU's nearest rivals—the Intel Core i5-11400, AMD Ryzen 5 7535HS, and AMD Ryzen 5 1600—all score within 0.3% of each other, showing that the processor is in a tightly contested performance band. Similarly, the GPU's rivals, including the AMD Radeon Pro 5600M and Pro 5700, are within 1.7% of the RTX 2060's average benchmark score. This clustering suggests that the combo's rank is more a function of the absolute performance ceiling than any specific weakness in this pairing.

Resolution Scaling

The frame rate progression from 1080p to 4K reveals a classic GPU-bound scenario. At High settings, the FPS drops from 159.6 at 1080p to 103.5 at 1440p (a 35.2% decrease) and then to 56.5 at 4K (a further 45.4% decrease from 1440p). This accelerating decline as resolution increases points to the RTX 2060's memory bandwidth and compute capabilities being the limiting factor at higher pixel counts.

At Low settings, the scaling shows a different pattern: 204.6 FPS at 1080p, 128.2 at 1440p, and 68.9 at 4K. The 1080p to 1440p drop of 37.3% is similar to High settings, but the 1440p to 4K drop of 46.3% is slightly steeper, suggesting that even at Low settings, the GPU struggles to maintain performance as pixel count quadruples. The CPU's contribution becomes relatively more significant at 1080p, where it can push frame rates beyond what the GPU can sustain at higher resolutions.

Measured FPS Breakdown

At 1920x1080, the RTX 2060 and Ryzen 5 3600 combination delivers excellent performance across all presets. Low settings achieve 204.6 FPS, Medium reaches 176.9 FPS, High hits 159.6 FPS, and Ultra still manages a very playable 116.9 FPS. These numbers indicate that 1080p is well within this hardware's comfort zone, with even the most demanding preset maintaining frame rates well above 100 FPS.

At 2560x1440, performance remains strong but shows the expected decline. Low produces 128.2 FPS, Medium 110.9 FPS, High 103.5 FPS, and Ultra 74.5 FPS. The Ultra preset at 1440p crosses below the 100 FPS threshold, but 74.5 FPS remains smooth for a tactical shooter where precision matters more than reaction speed.

At 3840x2160, the hardware begins to show its limits. Low achieves 68.9 FPS, Medium 59 FPS, High 56.5 FPS, and Ultra drops to 36.5 FPS. The gap between Low and High at 4K is relatively narrow (12.4 FPS), indicating that the GPU is saturated and additional settings have diminishing returns. Ultra at 4K is the only configuration where the frame rate becomes questionable for comfortable play, falling below the 40 FPS threshold that many players consider minimum for a shooter.

FAQ

Q: What is the best resolution and settings combination for this hardware in Ready Or Not?

A: At 1080p, High settings deliver 159.6 FPS, and 1440p High achieves 103.5 FPS, both maintaining smooth gameplay. 4K High at 56.5 FPS is playable but marginal, while 4K Ultra at 36.5 FPS falls below comfortable playability.

Q: How does the RTX 2060 compare to its nearest GPU rivals?

A: The RTX 2060's average benchmark score of 16074 places it 0.5% ahead of the AMD Radeon RX 7600S and 1.8% ahead of the AMD Radeon Pro W5500, while sitting 1.7% behind the AMD Radeon Pro 5600M and Pro 5700.

Q: Is the Ryzen 5 3600 holding back the RTX 2060 in this game?

A: The data suggests no significant CPU bottleneck. At 1080p Low, the system achieves 204.6 FPS, indicating the CPU can feed the GPU effectively. The CPU's 76th percentile ranking and its near-identical performance to the Intel Core i5-11400 (within 0.1%) confirm it is a capable partner.

Q: What frame rates can players expect at 1440p with Ultra settings?

A: At 2560x1440 with Ultra settings, the hardware produces 74.5 FPS. This is playable but represents a significant drop from High settings at the same resolution, which achieves 103.5 FPS.

Q: How does this combo rank compared to all tested configurations?

A: This pairing ranks 1430 out of 1748 tested combos, placing it in the bottom 18% of the database. However, the measured performance shows it remains capable of smooth gameplay at 1080p and 1440p.

Q: Is 4K gaming viable with this setup?

A: 4K is viable only at lower presets. Low settings achieve 68.9 FPS, Medium 59 FPS, and High 56.5 FPS. Ultra at 36.5 FPS is not recommended for comfortable play. The 6 GB VRAM capacity and 336.0 GB/s bandwidth likely contribute to the performance ceiling at this resolution.