Pc Building Simulator

Pc Building Simulator

AVERAGE FPS
47
playable

This combination offers playable performance with an average of 47 FPS, though you may want to lower settings for smoother gameplay.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 17 18 25 35
1440p QHD 32 34 48 68
1080p Full HD 51 54 76 107

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 35
3840x2160 Medium 25
3840x2160 High 18
3840x2160 Ultra 17
2560x1440 Low 68
2560x1440 Medium 48
2560x1440 High 34
2560x1440 Ultra 32
1920x1080 Low 107
1920x1080 Medium 76
1920x1080 High 54
1920x1080 Ultra 51

Pc Building Simulator with Intel Core Ultra 9 290K Plus + NVIDIA GeForce GTX 1650, In-Depth Analysis

# Pc Building Simulator: Intel Core Ultra 9 290K Plus + NVIDIA GeForce GTX 1650

This simulation title, released in 2019, is far more forgiving on CPU than on GPU, and the benchmark data for this particular combo—a top-tier 24-core processor paired with an entry-level 4 GB graphics card—makes that imbalance unmistakable. The measured results show a system where the GPU is the dominant constraint at every resolution, and the experience is defined entirely by how much graphical load you place on the GTX 1650. The data set includes four quality presets across three resolutions, giving a clear picture of what this pairing can and cannot do.

Settings Recommendations

The measured FPS rows make the optimal settings choice straightforward: Low preset at 1920x1080 is the only configuration that delivers a consistently smooth experience, with an average of 107 FPS. This is the single data point in the entire set that clears the 60 FPS threshold by a wide margin, making it the clear recommendation for any playable session. At this setting, the game runs at more than double the frame rate of the next-best preset at the same resolution, which is High at 54 FPS.

If you insist on higher visual fidelity, the Medium preset at 1920x1080 is the only other viable option, averaging 76 FPS with a measured range of 65 to 88 FPS. This keeps the frame rate above 60 in all recorded instances, though the margin at the low end is slim. The High preset at 1080p (54 FPS) and the Ultra preset at 1080p (51 FPS) both fall below the 60 FPS mark, so they are not recommended for smooth gameplay. At 1440p, even the Low preset drops to 68 FPS, which is playable but noticeably less fluid than the 1080p Low experience. The 4K data shows that no preset is remotely playable, with the best result being 35 FPS at Low—a figure that would feel sluggish in any interactive context.

The data strongly suggests that this game, at least with this GPU, is best experienced at 1080p with the Low preset. The jump from Low to Medium at 1080p costs 31 FPS (from 107 to 76), while the jump from Medium to High costs another 22 FPS (from 76 to 54). The visual return on those frame rate sacrifices is not quantified in the data, but the performance cliff is steep enough that the Low preset is the only sensible default.

FAQ

Q: Can this system run Pc Building Simulator at 4K with acceptable performance?

A: No. The best 4K result is 35 FPS at Low settings, which is below the standard 60 FPS target. At Medium, High, and Ultra, the averages are 25, 18, and 17 FPS respectively, all of which are essentially unplayable for a simulation title that requires precise mouse interaction.

Q: What is the best resolution and settings combination for this hardware?

A: The measured data shows that 1920x1080 with Low settings delivers 107 FPS average, which is the highest frame rate in the entire data set. This is the only combination that provides a definitive headroom above 60 FPS, making it the clear choice for smooth gameplay.

Q: How does the Ultra preset compare to High at 1080p?

A: At 1920x1080, the Ultra preset averages 51 FPS while High averages 54 FPS. The difference is only 3 FPS, suggesting that the Ultra preset offers marginal visual improvements at a negligible performance cost relative to High. Both are below the 60 FPS threshold, however.

Q: Is the CPU or GPU the limiting factor in this game?

A: The GPU is overwhelmingly the limiting factor. The Intel Core Ultra 9 290K Plus has a 96th percentile ranking among all CPUs, while the GTX 1650 sits at the 40th percentile among all GPUs. The frame rate drops by roughly 50% when moving from 1080p to 1440p at the same settings, which is a classic sign of GPU-bound performance rather than CPU limitation.

Q: What frame rate range can I expect at Medium settings across resolutions?

A: At 1080p Medium, the average is 76 FPS with a range of 65 to 88 FPS. At 1440p Medium, the average drops to 48 FPS with a range of 41 to 55 FPS. At 4K Medium, the average falls to 25 FPS with a range of 21 to 29 FPS. The 4K result is the only one with full min/max data available for Medium.

Q: Does the game use the CPU's multi-core capabilities effectively?

A: The data does not include CPU-specific game benchmarks, but the overall system rank of 2904 out of 3002 combos suggests that the massive CPU compute (Cinebench R23 multi-core score of 51,731) is largely wasted in this title. The GPU-bound frame rates indicate that the game's performance is not limited by CPU cores or threads.

GPU Role

The NVIDIA GeForce GTX 1650 is a 4 GB GDDR5 card with a 128-bit memory bus and 128.1 GB/s of bandwidth. Its architecture is Turing on a 12 nm process, with 896 shading units and a boost clock of 1665 MHz. These specifications place it at the 40th percentile among all GPUs, and its average benchmark score of 7,472 is within 1% of rivals like the AMD Radeon HD 8850M (7,447) and the Intel UHD Graphics 750 (7,441). The data indicates that this is a low-end card by modern standards, and its performance in Pc Building Simulator reflects that.

The VRAM capacity of 4 GB is the most likely culprit for the severe frame rate drops at higher resolutions. At 4K, the game demands more memory bandwidth and capacity than the card can provide, resulting in an average of 18 FPS at High and 17 FPS at Ultra. Even at 1440p, the High preset only manages 34 FPS, which is roughly 63% of the 1080p High score of 54 FPS. This scaling pattern is consistent with a GPU that runs out of memory or bandwidth as resolution increases, rather than a CPU-bound scenario where frame rates would remain more stable across resolutions.

The GTX 1650's DirectX 12 benchmark score of 35 (Passmark) is notably weak, but the game's measured performance at 1080p Low (107 FPS) shows that the card can handle the simulation's basic rendering demands when settings are reduced. The compute score of 3,048 (Passmark GPU Compute) is also low, but Pc Building Simulator does not appear to rely heavily on compute shaders based on the frame rate behavior. The pixel rate of 53.28 GPixel/s and texture rate of 93.24 GTexel/s are modest figures that align with the observed 1080p performance ceiling.

Measured FPS Breakdown

At 1920x1080, the full preset ladder is available. Low settings produce an average of 107 FPS, which is the highest measured value in the entire data set. Medium settings drop to 76 FPS (min 65, max 88), High settings fall to 54 FPS, and Ultra settings bottom out at 51 FPS. The gap between Low and Medium is 31 FPS, while the gap between Medium and High is 22 FPS, and the gap between High and Ultra is just 3 FPS. This suggests diminishing returns on visual quality as you move up the preset ladder, but also a steep cost for the first step up from Low.

At 2560x1440, the pattern repeats with lower absolute values. Low settings average 68 FPS, Medium averages 48 FPS (min 41, max 55), High averages 34 FPS, and Ultra averages 32 FPS. The relative drops from 1080p are consistent: Low falls by 39 FPS, Medium by 28 FPS, High by 20 FPS, and Ultra by 19 FPS. The percentage drops range from 36% (Low) to 37% (High), indicating a uniform scaling penalty as pixel count increases.

At 3840x2160, the results are uniformly poor. Low settings average 35 FPS, Medium averages 25 FPS (min 21, max 29), High averages 18 FPS, and Ultra averages 17 FPS. The 4K data shows a compression of the preset differences: Low to Medium is a 10 FPS drop, Medium to High is a 7 FPS drop, and High to Ultra is just a 1 FPS drop. This indicates that the GPU is so overwhelmed at 4K that preset changes have minimal impact on the final frame rate.

Resolution Scaling

The frame rate scaling from 1080p to 1440p to 4K reveals a GPU-bound system with sharp performance cliffs. At Low settings, the 1080p average of 107 FPS drops to 68 FPS at 1440p (a 36% reduction) and then to 35 FPS at 4K (a 49% reduction from 1440p). At Medium settings, the 1080p average of 76 FPS falls to 48 FPS at 1440p (37% reduction) and then to 25 FPS at 4K (48% reduction). The pattern is nearly identical across all presets, with each resolution step costing roughly 35-50% of the previous frame rate.

This scaling behavior is a textbook sign of a GPU-limited workload. If the CPU were the bottleneck, the frame rate would stay relatively constant as resolution increases, because the CPU would be maxed out regardless of pixel count. Instead, the frame rate halves at each resolution step, which is exactly what happens when the GPU's fill rate and memory bandwidth are saturated. The GTX 1650's 128.1 GB/s of memory bandwidth is simply insufficient for 4K rendering, and the 4 GB VRAM capacity likely forces texture thrashing at higher resolutions.

The data also shows that the gap between presets narrows as resolution increases. At 1080p, Low is 56 FPS ahead of Ultra (107 vs 51). At 1440p, that gap shrinks to 36 FPS (68 vs 32). At 4K, the gap is just 18 FPS (35 vs 17). This convergence indicates that at 4K, the GPU is so constrained that even the lowest settings cannot provide enough headroom to differentiate from the highest settings. The limiting factor shifts from settings-based load to absolute pixel throughput.

CPU Role

The Intel Core Ultra 9 290K Plus is a 24-core, 24-thread processor with a base clock of 3.70 GHz and a boost clock of 5.80 GHz. It has 36 MB of shared L3 cache and supports DDR5 memory with a bandwidth of 115.2 GB/s. Its benchmark scores are exceptional: Cinebench R23 multi-core reaches 51,731, and single-core reaches 7,303. The Passmark multi-thread score is 60,860, and the single-thread score is 4,823. These numbers place it at the 96th percentile among all CPUs, with an average benchmark score of 84,003.

The nearest rivals in the CPU benchmark data are the Intel Core Ultra 9 285K (83,807, 0.2% slower), the AMD EPYC 4584PX (83,090, 1.1% slower), and the AMD EPYC 9135 (82,980, 1.2% slower). The AMD EPYC 7F72 is 1.3% faster at 85,072. This is a top-tier desktop processor that should never be the bottleneck in any game, and the data confirms that in Pc Building Simulator, it is not.

The system's overall rank of 2,904 out of 3,002 combos is remarkably low for such a powerful CPU, which further underscores the GPU's dominance in determining the experience. The CPU's massive multi-core capability (Cinebench R15 multi-core score of 5,214 and R20 of 21,727) is largely irrelevant to a game that is clearly GPU-bound at all measured settings. Even at 1080p Low, where the GPU produces 107 FPS, the CPU is unlikely to be stressed to its limits, as the game's simulation mechanics are not computationally intensive enough to utilize 24 cores.

The data suggests that the Core Ultra 9 290K Plus contributes nothing to the frame rate in this title; it simply provides enough single-thread performance (Cinebench R23 single-core score of 7,303) to avoid becoming a bottleneck. The Passmark physics score of 3,315 and data compression score of 698,346 are strong, but they do not translate into higher FPS in this game. The CPU's role is effectively neutral, and the experience is determined entirely by the GTX 1650's rendering capabilities.

Hardware Specifications

Intel Core Ultra 9 290K Plus

Cores / Threads 24 / 24
Base Clock 3700 MHz
Boost Clock 5800 MHz
TDP 125W
Socket Intel Socket 1851
View Full CPU Details →

NVIDIA GeForce GTX 1650

VRAM 4 GB GDDR5
Base Clock —
Boost Clock 1665 MHz MHz
TDP 75 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core Ultra 9 290K Plus + NVIDIA GeForce GTX 1650 in Pc Building Simulator

Resolution Settings Avg FPS
3840x2160 Low 35.0
3840x2160 Medium 25.0
3840x2160 High 18.0
3840x2160 Ultra 17.0
2560x1440 Low 68.0
2560x1440 Medium 48.0
2560x1440 High 34.0
2560x1440 Ultra 32.0
1920x1080 Low 107.0
1920x1080 Medium 76.0
1920x1080 High 54.0
1920x1080 Ultra 51.0

Pc Building Simulator with iUltra 9 290K Plus + Other GPUs

See how Pc Building Simulator performs with the same CPU but different graphics cards.

Pc Building Simulator with GTX 1650 + Other CPUs

See how Pc Building Simulator performs with the same GPU but different processors.

Other Games with iUltra 9 290K Plus + GTX 1650

Explore FPS benchmarks for other games using this same hardware combination.