Pc Building Simulator

Intel Core i7-14700K with the NVIDIA GeForce RTX 2060 produces a broad spread of frame rates in Pc Building Simulator, ranging from a playable 35.9 FPS at 4K High to a fluid 204.1 FPS at 1080p Low. The combo sits at rank 1456 out of 1769 tested combinations, placing it in the lower 18% of all pairings for this title. The benchmark data reveals a system where the GPU is consistently the performance ceiling, particularly at higher resolutions and quality presets, while the CPU's substantial headroom remains largely untapped.

CPU Role

The Intel Core i7-14700K is a 20-core, 28-thread processor based on the Raptor Lake architecture, with a base clock of 3.40 GHz and a boost clock of 5.60 GHz. This is a high-end desktop part, evidenced by its 96th percentile ranking among all CPUs and a strong Cinebench R23 multi-core score of 44534, alongside a single-core score of 6287. The processor's capabilities are far beyond what Pc Building Simulator demands, as the game's simulation logic is unlikely to stress all 20 cores simultaneously.

In this specific pairing, the CPU's role is to feed frames to the RTX 2060 without becoming a bottleneck. The data suggests it does so effortlessly. At 1080p Low, the combo achieves 204.1 FPS, which is a high frame rate that still leaves the CPU with overhead. The processor's Geekbench single-core score of 2932 and Passmark single-thread score of 4472 indicate that its per-core strength is more than sufficient for the game's primary thread. The bottleneck analysis, therefore, points squarely at the GPU.

The RTX 2060, with 1920 shading units and a boost clock of 1680 MHz, is the limiting factor. Its 6 GB of GDDR6 memory on a 192-bit bus provides 336.0 GB/s of bandwidth, which is adequate for 1080p but becomes strained at higher resolutions. The GPU's Passmark G3D score of 14111 and its 58th percentile ranking among all GPUs show it is a mid-range part from a previous generation. The disparity between the CPU's 96th percentile and the GPU's 58th percentile explains why performance scales so predictably with resolution and settings changes, as the GPU is always the first component to reach its limit.

FAQ

Q: What is the best resolution for this CPU-GPU combo in Pc Building Simulator?

A: The data shows 1080p is the only resolution where all settings presets exceed 90 FPS. At 1440p, High and Ultra presets drop below 70 FPS, and at 4K, only the Low preset achieves a playable 65.9 FPS.

Q: How does the RTX 2060 compare to its nearest rivals in raw benchmark scores?

A: The RTX 2060 has an average benchmark score of 16074. It is 0.5% ahead of the AMD Radeon RX 7600S (15996) and 1.8% ahead of the AMD Radeon Pro W5500 (15786), while being 1.7% behind both the AMD Radeon Pro 5600M and AMD Radeon Pro 5700 (both 16351).

Q: Is the Intel Core i7-14700K a performance bottleneck for the RTX 2060?

A: No. The CPU's benchmark scores, including a 96th percentile ranking and a Cinebench R20 multi-core score of 18704, indicate it has far more performance headroom than the GPU can utilize. The measured FPS drops with resolution and settings confirm the GPU is the limiting component.

Q: What is the maximum average FPS achievable with this combo?

A: The highest recorded average FPS in the measured data is 204.1 at 1920x1080 with Low settings. This is more than double the 95.1 FPS seen at the same resolution with Ultra settings.

Q: How does the combo rank overall in Pc Building Simulator?

A: The combo is ranked 1456 out of 1769 tested combinations. This places it in the lower portion of the performance distribution, which is consistent with a high-end CPU paired with a mid-range GPU.

Q: Is the game more demanding on the CPU or the GPU at 4K resolution?

A: The FPS drop from 1080p to 4K indicates the GPU is the primary constraint. For instance, at High settings, the average FPS falls from 104.7 at 1080p to 35.9 at 4K, a reduction that aligns with the GPU's rendering workload increasing, not the CPU's.

How This Combo Ranks

The combination of the Intel Core i7-14700K and NVIDIA GeForce RTX 2060 achieves a rank of 1456 out of 1769 combos in Pc Building Simulator. This rank is a direct result of the significant performance gap between the two components. The CPU is in the 96th percentile of all processors, with an average benchmark score of 70074, while the GPU is in the 58th percentile with an average score of 16074. This 4.3x difference in average scores highlights the imbalance.

The ranking suggests that while the system is capable of high frame rates at lower settings, it falls behind combos that pair a more balanced mid-range CPU with a stronger GPU. The data indicates the CPU's performance is largely wasted in this specific configuration, as the RTX 2060 cannot translate the i7-14700K's Cinebench R23 multi-core score of 44534 into proportional FPS gains. The combo's position in the lower 18% of all tested pairings is a clear indicator that this is a CPU-heavy configuration that does not optimize gaming performance for this title. The nearest CPU rival, the Intel Core i7-14700KF, has a nearly identical average score (70104 vs 70074), but pairing it with a different GPU would likely yield a different rank.

Measured FPS Breakdown

The measured FPS data shows a clear hierarchy across resolutions and settings. At 1920x1080, the combo delivers 204.1 FPS on Low, 146.3 FPS on Medium, 104.7 FPS on High, and 95.1 FPS on Ultra. This is a wide spread, with the Ultra preset delivering 53% of the Low preset's frame rate. The 1080p results are all comfortably above 60 FPS, making this resolution the only one where every setting is viable for smooth gameplay.

Moving to 2560x1440, the frame rates drop significantly. Low settings yield 131.5 FPS, Medium produces 91.1 FPS, High falls to 65.6 FPS, and Ultra dips to 59.8 FPS. The step from High to Ultra at this resolution is a 5.8 FPS drop, which is smaller than the 41.9 FPS drop from Low to Medium. At 1440p, the Ultra preset becomes marginal for a 60 FPS target.

At 3840x2160, the RTX 2060 is heavily taxed. The Low preset manages 65.9 FPS, which is the only playable option. Medium drops to 45.8 FPS, High to 35.9 FPS, and Ultra to 31.7 FPS. The gap between Low and Ultra at 4K is 34.2 FPS, demonstrating the GPU's inability to handle the higher fidelity settings at this resolution. The data shows that the RTX 2060's 6 GB of VRAM and 336.0 GB/s bandwidth are insufficient for 4K gaming beyond low quality presets.

Resolution Scaling

The transition from 1080p to 4K illustrates the GPU-bound nature of this combo. At Low settings, the average FPS drops from 204.1 at 1080p to 131.5 at 1440p, and then to 65.9 at 4K. This represents a 67.7% reduction in frame rate from 1080p to 4K. At High settings, the drop is even steeper: 104.7 FPS at 1080p, 65.6 FPS at 1440p, and 35.9 FPS at 4K, a 65.7% decrease.

These scaling patterns are characteristic of a GPU bottleneck. The CPU's performance, as measured by its Cinebench R20 single-core score of 2640, does not change with resolution, so the FPS decline can only be attributed to the GPU's rendering load increasing. The fact that the 4K Low score of 65.9 FPS is nearly identical to the 1440p High score of 65.6 FPS suggests that the GPU is hitting a similar computational limit in both scenarios, regardless of the specific settings combination. The data indicates that doubling the pixel count from 1080p to 4K roughly halves the frame rate, which is the expected behavior for a system where the GPU is the sole limiting factor.

Settings Recommendations

The optimal settings depend on the target resolution and desired frame rate. For 1080p, the High preset at 104.7 FPS provides an excellent balance, offering significantly better visual fidelity than Medium (146.3 FPS) while still maintaining a very high frame rate. The Ultra preset at 95.1 FPS is also viable, but the 9.6 FPS gain from High to Ultra is modest compared to the 41.6 FPS gain from Medium to High.

At 1440p, the High preset at 65.6 FPS is the recommended choice for a smooth 60 FPS experience. The Ultra preset at 59.8 FPS falls just short of this target, and the drop from High to Ultra is only 5.8 FPS, which does not justify the potential visual trade-offs. The Medium preset at 91.1 FPS is a strong alternative for users prioritizing frame rate over fidelity.

For 4K, the Low preset at 65.9 FPS is the only configuration that delivers a playable experience. The Medium preset at 45.8 FPS and High at 35.9 FPS are not suitable for smooth gameplay. The data shows that this combo is not well-suited for 4K gaming with high-quality settings, and users should either lower the resolution or the settings to achieve a playable frame rate. The Ultra preset at 4K (31.7 FPS) should be avoided entirely.