Pc Building Simulator

Pc Building Simulator is a simulation title where the hardware you assemble dictates the performance you can expect, and this specific pairing of an Intel Core i7-14700F with an AMD Radeon RX 9070 XT delivers a wide spectrum of framerates depending on how you configure the graphics settings. The benchmark data shows a system that is overwhelmingly capable at standard resolutions but requires careful settings management to maintain high refresh rates at 4K. The measured results indicate a combo that sits in the 426th position out of 1769 tested configurations, placing it firmly in the upper quartile of all tested systems for this game.

FAQ

Q: What is the best resolution to use with this CPU and GPU combo for a high refresh rate experience?

A: At 2560x1440 with High settings, the system produces an average of 117.6 FPS, which is ideal for a 144Hz monitor. For even higher refresh rates, the 1920x1080 resolution with High settings yields 183.1 FPS, and dropping to Low settings at 1080p pushes the average up to 363.1 FPS.

Q: Can this system handle 4K gaming in Pc Building Simulator?

A: Yes, but with limitations. At 3840x2160 with High settings, the average FPS is 60.9, which is playable. However, if you switch to Ultra settings at 4K, the average drops to 58.2 FPS, making it less suitable for high-refresh-rate displays.

Q: How does the Intel Core i7-14700F perform relative to its closest rivals in general benchmarks?

A: The i7-14700F has an average benchmark score of 54097, which is 0.6% lower than the AMD Ryzen 9 9900X and 1.1% lower than the AMD Ryzen 9 9900X3D. It is 1.2% faster than the Intel Xeon Phi 7290 and 1.7% faster than the AMD EPYC 7313P.

Q: What is the GPU's performance percentile compared to all other graphics cards?

A: The AMD Radeon RX 9070 XT has a percentile rank of 82, meaning it performs better than 82% of all GPUs in the database. Its average benchmark score is 39647, which is nearly identical to the AMD Radeon Pro 575, sitting just 0.1% behind it.

Q: Is the CPU's performance mostly dependent on single-core or multi-core strength for this game?

A: The CPU has a strong multi-core presence with a Cinebench R23 multi-core score of 35443 and a single-core score of 5003. The data suggests that in a simulation game, the multi-core performance, which is 94th percentile overall, is crucial for handling complex calculations, while the high boost clock of 5.40 GHz ensures responsive single-threaded tasks.

Q: What is the memory configuration of the GPU and how does it affect performance?

A: The Radeon RX 9070 XT comes equipped with 16 GB of GDDR6 memory on a 256-bit bus, providing a memory bandwidth of 644.6 GB/s. This large memory pool is more than sufficient for the textures and assets in Pc Building Simulator, even at 4K resolutions where the data shows a 60.9 FPS average on High settings.

GPU Role

The AMD Radeon RX 9070 XT is the primary driver of frame rates in Pc Building Simulator, and its 16 GB of GDDR6 memory is a key asset. The memory clock runs at 2518 MHz, translating to 20.1 Gbps effective, and with a 256-bit bus, the total bandwidth reaches 644.6 GB/s. This bandwidth is critical for streaming the high-resolution textures that simulation games often load, and the data supports this: at 3840x2160, the GPU manages 60.9 FPS on High settings, but this drops to 58.2 FPS on Ultra, indicating that the extra memory load from higher settings begins to impact performance.

The GPU's boost clock of 2970 MHz is substantial, and its shading units are numerous at 4096. This compute power is reflected in the 3DMark Steel Nomad DX12 score of 7260. In practical terms, the GPU is capable of pushing well over 100 FPS at 1440p, as seen with the 117.6 FPS average on High settings. The step to 4K is a significant one; the performance nearly halves, showing that while the card is powerful, the demands of 4K in this title are high. The GPU's overall percentile rank is 82, which suggests it outperforms the vast majority of other cards, though its nearest rivals, such as the AMD Radeon Pro 575 and NVIDIA RTX A500 Mobile, have nearly identical average scores, indicating that the RX 9070 XT is at the top of a performance plateau.

CPU Role

The Intel Core i7-14700F provides the computational backbone for the simulation logic in Pc Building Simulator. With 20 cores and 28 threads, it offers significant parallel processing capability, which is evident in its Cinebench R23 multi-core score of 35443. This multi-core strength is likely what allows the game to calculate component compatibility, power draws, and thermal outputs in real-time without bottlenecking the GPU. The CPU's base clock is 2.10 GHz, but it can boost up to 5.40 GHz, providing high single-threaded performance when needed, as shown by its Cinebench R23 single-core score of 5003.

The CPU's percentile ranking of 94 versus all other CPUs indicates it is a top-tier processor. Its average benchmark score of 54097 places it in a tight race with its nearest rivals, being just 0.6% behind the AMD Ryzen 9 9900X. In this game, the CPU's role appears to be less about the raw frame rate ceiling and more about maintaining consistent performance. The benchmark results show that at 1080p Low settings, the system hits 363.1 FPS, a framerate where the CPU's single-thread performance becomes the limiting factor. The i7-14700F's high boost clock and efficient architecture ensure that even at these high frame rates, the system does not stutter, allowing the GPU to operate at its full potential.

Settings Recommendations

The measured data provides a clear picture of how settings impact performance. For users with a 1920x1080 display, the High preset is the best balance, delivering 183.1 FPS, which is more than sufficient for any monitor. The Medium preset at 1080p jumps to 261.5 FPS, but this is likely beyond the refresh rate of most displays, so the visual fidelity of High is preferable. At 2560x1440, the High preset is again the recommended choice, with a 117.6 FPS average that is ideal for 144Hz monitors. The Ultra preset at 1440p drops to 109.7 FPS, which is still playable but sacrifices some smoothness for marginal visual gains.

At 3840x2160, the situation changes. The High preset yields 60.9 FPS, which is the minimum for a smooth experience. The Medium preset at 4K provides 87.1 FPS, which is a significant improvement and is the recommended setting for 4K users who want to stay above 60 FPS. The Ultra preset at 4K drops to 58.2 FPS, which is below the 60 FPS threshold and not recommended unless the user has a variable refresh rate monitor. The Low preset at any resolution provides the highest frame rates, but the data shows that the High preset offers a substantial performance headroom without requiring the lowest settings, making it the sweet spot for visual quality and smoothness.

How This Combo Ranks

This specific configuration of the Intel Core i7-14700F and AMD Radeon RX 9070 XT ranks 426th out of 1769 tested combos in Pc Building Simulator. This places it in the top 24% of all systems tested, which is a strong result. The ranking reflects the system's ability to handle the game's demands across all settings and resolutions. The CPU is a top performer, ranking in the 94th percentile, while the GPU is slightly less dominant at the 82nd percentile. This suggests that the CPU is not the bottleneck in this pairing, and the overall combo rank is likely constrained by the GPU's performance tier.

When compared to other combos, this system is positioned well for high-refresh-rate 1440p gaming and entry-level 4K gaming. The data shows that the system is capable of exceeding 100 FPS at 1440p on High settings, which is a performance level that many other configurations cannot achieve. The combo rank of 426 indicates that while there are 425 faster systems, this one offers a balanced and powerful experience for a simulation game that can be demanding on both the CPU and GPU.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of the system's performance across different settings and resolutions.

At 1920x1080, the system performs exceptionally well. With Low settings, the average FPS is 363.1. Moving to Medium settings, the average drops to 261.5 FPS. The High preset produces an average of 183.1 FPS, while the Ultra preset results in 173.9 FPS. These numbers show that even at the highest settings, the system is well above the 144Hz refresh rate threshold, making it a perfect match for competitive or fast-paced simulation play.

At 2560x1440, the performance remains strong. The Low settings yield an average of 230.9 FPS. Medium settings produce 163.4 FPS, and High settings result in 117.6 FPS. The Ultra preset brings the average down to 109.7 FPS. This resolution is the sweet spot for this combo, offering high frame rates with excellent visual detail, particularly on the High preset.

At 3840x2160, the performance scales down as expected. The Low settings provide an average of 119.1 FPS, which is still very playable. The Medium settings produce 87.1 FPS, offering a good balance for 4K. The High settings result in 60.9 FPS, which is the baseline for a smooth experience. The Ultra settings drop to 58.2 FPS, which is slightly below the ideal 60 FPS target. The data clearly shows that for 4K, the Medium preset is the optimal choice to maintain a consistently smooth frame rate, while users with higher tolerance can use High.