Pc Building Simulator

Settings Recommendations

The measured data for Pc Building Simulator with the Intel Core i5-14600KF and NVIDIA GeForce RTX 3070 Ti shows a clear hierarchy across settings presets. At 1080p, the Medium preset delivers 225.9 FPS, which is 65.1 FPS higher than High at 160.7 FPS, while Ultra drops to 153.3 FPS. The gap between Medium and High is substantial, but the gameplay experience at Medium is still far beyond typical display refresh rates. For 1440p, Medium produces 143.2 FPS, which remains highly fluid, while High yields 102.3 FPS and Ultra 95 FPS. At 4K, the situation shifts: Medium drops to 74.1 FPS, High to 51.8 FPS, and Ultra to 47.4 FPS.

The best experience per the measured rows is the Medium preset at 1440p. This configuration balances visual fidelity with a 143.2 FPS average, comfortably above 144Hz-capable displays. Choosing High at 1440p sacrifices 40.9 FPS for marginal visual gains, and Ultra at 1440p only improves on High by a negligible margin while costing another 7.3 FPS. At 4K, Medium is the only preset that maintains a playable 74.1 FPS; High and Ultra fall below 60 FPS, making them less ideal for smooth gameplay. The Low preset, while reaching 320.8 FPS at 1080p and 201.5 FPS at 1440p, is unnecessary given how well Medium performs at those resolutions.

GPU Role

The NVIDIA GeForce RTX 3070 Ti is built on the Ampere architecture with a GA104 chip, featuring 6,144 shading units, 192 texture mapping units, and 96 raster output units. Its 8 GB of GDDR6X memory runs on a 256-bit bus with a bandwidth of 608.3 GB/s, and the memory clock is rated at 1188 MHz with 19 Gbps effective speed. The base clock is 1575 MHz, boosting to 1770 MHz. These specifications position the GPU at the 74th percentile among all GPUs in the database, with an average benchmark score of 30,849.

In this simulation game, the GPU's memory capacity is a limiting factor at higher resolutions. The 8 GB VRAM is sufficient for 1080p and 1440p, where the data shows strong scaling from Low to Ultra. At 4K, the performance drop from Medium (74.1 FPS) to High (51.8 FPS) and Ultra (47.4 FPS) suggests that memory bandwidth and capacity strain under higher detail settings. The GPU's 21.75 TFLOPS of FP32 compute and 169.9 GPixel/s pixel rate are notable, but the game's simulation workload appears less GPU-bound than typical shooters. The nearest rivals for this GPU include the AMD Radeon RX 590 GME, which scores 0.3% higher, and the AMD Radeon RX 6700, which scores 0.8% lower, indicating the RTX 3070 Ti sits in a tightly contested performance band. Its passmark G3D score of 23,356 and Geekbench OpenCL score of 137,518 reflect solid compute capability, but the 4K Ultra result shows the architecture's limits under maximum load.

CPU Role

The Intel Core i5-14600KF is a 14-core, 20-thread processor from the Core 14th Gen series, built on Raptor Lake architecture with a 10 nm process. It operates with a base clock of 3.50 GHz and a boost clock of 5.30 GHz, with a 125 W TDP. The cache layout includes 80 KB L1 per core, 2 MB L2 per core, and 24 MB shared L3. Its Cinebench R23 multi-core score is 32,889, and single-core is 4,643, placing it at the 93rd percentile among all CPUs with an average benchmark score of 49,367.

For Pc Building Simulator, the CPU's role is primarily in simulation logic and system state updates. The data shows that at 1080p Low, the combo achieves 320.8 FPS, which is far beyond what most displays can show, indicating the CPU is not a bottleneck at lower settings. The processor's 14 cores and 20 threads provide ample parallel throughput for the game's simulation loops, and its nearest rival, the Intel Core i5-14600K, scores only 0.4% higher, making the KF variant effectively identical in performance. The AMD Ryzen 9 5950X scores 0.6% higher, while the AMD EPYC 4345P scores 0.5% lower, showing the i5-14600KF is competitive with higher-core-count chips. The passmark multi-thread score of 38,697 and single-thread of 4,273 reinforce its strength. At 4K Ultra, the FPS drops to 47.4, but this is primarily GPU-limited, as the CPU's single-thread performance remains high enough to feed the GPU. The game's modest thread requirements mean the 14-core design is overkill, but it ensures consistent frame pacing even with background tasks.

FAQ

Q: What is the best resolution for this combo if I want over 100 FPS?

A: At 1440p High, the combo delivers 102.3 FPS, and at 1440p Low it reaches 201.5 FPS. For 100+ FPS with good visuals, 1440p High is the highest settings preset that clears that threshold.

Q: How does the RTX 3070 Ti compare to its nearest rivals?

A: The RTX 3070 Ti has an average benchmark score of 30,849, which is 0.3% lower than the AMD Radeon RX 590 GME and 0.8% lower than the AMD Radeon RX 6700. It outperforms the NVIDIA Quadro M5000 by 0.9% and the NVIDIA GRID M60-1Q by 1.2%.

Q: Is the i5-14600KF significantly faster than the i5-14600K?

A: The i5-14600KF scores 49,367 on average, which is 0.4% higher than the i5-14600K at 49,166. This is a negligible difference, and the two chips are effectively interchangeable in performance.

Q: Can this combo handle 4K gaming?

A: At 4K Medium, the combo achieves 74.1 FPS, which is playable. However, at 4K High the average drops to 51.8 FPS, and at Ultra it falls to 47.4 FPS, so maximum settings at 4K are not advisable for smooth gameplay.

Q: What settings should I use at 1080p for the highest frame rates?

A: At 1080p Low, the combo reaches 320.8 FPS, while Medium yields 225.9 FPS. For competitive play, Medium is recommended as it provides a 65.1 FPS advantage over High while maintaining visual quality.

Q: How does the CPU's single-thread performance affect this game?

A: The i5-14600KF's Cinebench R23 single-core score of 4,643 and Geekbench single-core score of 2,778 indicate strong per-core performance. This ensures the game's simulation logic runs efficiently, with 1080p Low hitting 320.8 FPS, showing no CPU bottleneck at any tested setting.

Resolution Scaling

The measured FPS data reveals a clear scaling pattern from 1080p to 4K. At Low settings, the average FPS drops from 320.8 at 1080p to 201.5 at 1440p, a reduction of 119.3 FPS, and then to 103.8 at 4K, another 97.7 FPS reduction. This represents a 67.6% decrease from 1080p to 4K at Low settings. At Medium settings, the drop is from 225.9 at 1080p to 143.2 at 1440p, then to 74.1 at 4K, a 67.2% total decrease. High settings show 160.7 at 1080p, 102.3 at 1440p, and 51.8 at 4K, a 67.8% decrease. Ultra settings go from 153.3 at 1080p to 95 at 1440p to 47.4 at 4K, a 69.1% decrease.

The consistency of these percentage drops across all settings indicates that the limiting component is the GPU. If the CPU were the bottleneck, the scaling would flatten at lower resolutions, but the FPS continues to scale proportionally with pixel count. The RTX 3070 Ti's 608.3 GB/s memory bandwidth and 8 GB VRAM become increasingly stressed as resolution rises, particularly at 4K where High and Ultra fall below 60 FPS. The i5-14600KF, with its high single-thread performance, is not the constraint here; even at 1080p Low, the 320.8 FPS result suggests the CPU has headroom remaining. The scaling pattern points to a GPU-bound scenario at all resolutions, with the GPU's compute and memory resources determining the final frame rates.

Measured FPS Breakdown

At 1920x1080, the combo produces the following average FPS by preset: Low at 320.8, Medium at 225.9, High at 160.7, and Ultra at 153.3. The gap between Low and Medium is 94.9 FPS, while the gap between High and Ultra is only 7.4 FPS, showing diminishing returns at the top end. At 2560x1440, the results are: Low at 201.5, Medium at 143.2, High at 102.3, and Ultra at 95. The difference between Medium and High is 40.9 FPS, and between High and Ultra is 7.3 FPS. At 3840x2160, the results are: Low at 103.8, Medium at 74.1, High at 51.8, and Ultra at 47.4. The gap between Medium and High is 22.3 FPS, and between High and Ultra is 4.4 FPS.

Comparing across resolutions, the 1440p Medium result of 143.2 FPS is nearly identical to the 1080p Ultra result of 153.3 FPS, indicating that resolution scaling has a similar performance cost to setting scaling. The 4K Low result of 103.8 FPS is slightly higher than the 1440p High result of 102.3 FPS, showing that dropping resolution has a larger impact than dropping settings at higher pixel counts. The data shows no min or max FPS values, so average FPS is the sole metric for comparison. The largest single-step drop occurs from 1080p Low to 1440p Low, a 119.3 FPS reduction, while the smallest is from 1440p Ultra to 4K Ultra, a 47.6 FPS reduction. This pattern confirms that pixel count is the primary driver of performance loss.

How This Combo Ranks

The Intel Core i5-14600KF and NVIDIA GeForce RTX 3070 Ti combination ranks 680th out of 1,769 tested combos in Pc Building Simulator, placing it in the top 38.5% of all configurations. This rank reflects the balanced nature of the pairing: the CPU sits at the 93rd percentile among all CPUs, while the GPU is at the 74th percentile among all GPUs. The combination's performance is constrained more by the GPU than the CPU, as evidenced by the resolution scaling analysis.

The CPU's high percentile ranking suggests that it is not the limiting factor, but the GPU's lower percentile means the system's overall rank is pulled down. The combo's position at 680th indicates that there are 1,089 tested combinations that perform better, likely featuring higher-tier GPUs paired with similar or better CPUs. The i5-14600KF's nearest rivals, such as the i5-14600K at 0.4% higher and the Ryzen 9 5950X at 0.6% higher, would likely yield similar rankings when paired with the same GPU. The RTX 3070 Ti's nearest rivals, including the RX 6700 at 0.8% lower, could shift the ranking slightly depending on their pairing. Overall, this combo is a mid-to-upper tier configuration that excels at 1080p and 1440p gaming but struggles at 4K with high settings, which is consistent with its 680th rank among a diverse field of test systems.