Pc Building Simulator

Pc Building Simulator

AVERAGE FPS
70
good

This combination provides smooth gameplay with an average of 70 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 25 28 36 53
1440p QHD 49 51 72 101
1080p Full HD 78 79 111 156

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 53
3840x2160 Medium 36
3840x2160 High 28
3840x2160 Ultra 25
2560x1440 Low 101
2560x1440 Medium 72
2560x1440 High 51
2560x1440 Ultra 49
1920x1080 Low 156
1920x1080 Medium 111
1920x1080 High 79
1920x1080 Ultra 78

Pc Building Simulator with Intel Core i5-14400F + NVIDIA GeForce RTX 3050 4 GB, In-Depth Analysis

Resolution Scaling

The measured FPS data for Pc Building Simulator shows a clear and steep performance cliff as resolution increases, with the Intel Core i5-14400F + NVIDIA GeForce RTX 3050 4 GB combination transitioning from a smooth experience at 1080p to a borderline unplayable one at 4K. At 1080p Low, the combo delivers 155.9 FPS, which drops to 100.7 FPS at 1440p Low (a 35% reduction) and then plummets to 52.7 FPS at 4K Low (a 48% reduction from 1440p). This scaling pattern is consistent across all settings presets, indicating that the GPU becomes the dominant limiting factor as pixel count rises.

The gap between 1080p and 4K widens dramatically at higher settings. At High settings, the combo produces 79.1 FPS at 1080p, falls to 50.6 FPS at 1440p, and reaches only 28.1 FPS at 4K. The Ultra preset tells an even harsher story: 77.5 FPS at 1080p, 49.4 FPS at 1440p, and 24.9 FPS at 4K. Notably, the difference between 1080p and 1440p is roughly 36-38% across High, Medium, and Ultra, while the jump from 1440p to 4K costs another 44-50% of performance. This non-linear scaling suggests that memory bandwidth and fill rate constraints intensify disproportionately at 4K.

The data reveals that 1080p is the only resolution where this combo can maintain frame rates above 60 FPS across all presets, with even Ultra averaging 77.5 FPS. At 1440p, only Low (100.7 FPS) and Medium (71.7 FPS) clear the 60 FPS threshold, while High and Ultra fall to 50.6 and 49.4 FPS respectively. At 4K, every preset fails to reach even 53 FPS, with Ultra bottoming out at 24.9 FPS. The resolution scaling curve indicates that users targeting 60 FPS should treat 1440p Medium as the practical ceiling, and 4K is only viable for screenshot-style play or heavily reduced settings.

GPU Role

The NVIDIA GeForce RTX 3050 4 GB is the clear bottleneck in this pairing, and the measured FPS data confirms that its 4 GB VRAM capacity and 128-bit memory interface are the primary constraints. The GPU's memory runs at 1500 MHz with 12 Gbps effective speed, delivering 192.0 GB/s of bandwidth across a 4 GB GDDR6 frame buffer. In Pc Building Simulator, the simulation's scene complexity and texture workloads appear to scale aggressively with resolution, and the 4 GB capacity is insufficient to hold high-resolution assets without significant performance degradation.

The GPU's clock behavior plays a role in the observed scaling. With a base clock of 1545 MHz and a boost clock of 1740 MHz, the RTX 3050 4 GB has a modest thermal and power envelope (90 W TDP) that allows sustained boost operation. However, the 32 ROPs and 64 TMUs are relatively limited for 4K workloads, which explains why the Ultra preset at 4K drops to 24.9 FPS. The pixel rate of 55.68 GPixel/s and texture rate of 111.4 GTexel/s are simply insufficient for 8.3 million pixels per frame at 4K with complex shading.

The GPU's 2048 shading units and 16 RT cores are adequate for 1080p gaming, as evidenced by the 155.9 FPS at Low settings. However, the 7.127 TFLOPS FP32 throughput is not enough to maintain high frame rates at 4K, especially when the simulation logic and rendering are combined. The 50th percentile ranking among all GPUs places this card in the mid-range tier, and the benchmark results reflect that positioning: it delivers playable frame rates at 1080p, acceptable at 1440p with reduced settings, and sub-30 FPS at 4K Ultra. The 4 GB VRAM is also a concern for texture-heavy scenes, as the measured FPS drops suggest that memory spillover or compression overhead is occurring at higher resolutions.

CPU Role

The Intel Core i5-14400F provides a strong foundation for this combo, and its 10 cores and 16 threads are more than sufficient for Pc Building Simulator's simulation-heavy gameplay. The CPU's boost clock of 4.70 GHz on performance cores ensures that single-threaded game logic runs smoothly, which is evidenced by the fact that at 1080p Low, the combo achieves 155.9 FPS — a figure that would be constrained by the CPU if it were the bottleneck. The 20 MB shared L3 cache helps keep frequently accessed game data close to the cores, reducing latency in simulation calculations.

The CPU's benchmark scores reinforce its capability. In Cinebench R23, the i5-14400F scores 21914 multi-core and 3093 single-core, placing it in the 88th percentile among all CPUs. Its nearest rival, the Intel Core i7-12800H, scores 32513 average (0% delta), while the AMD Ryzen 5 PRO 7645 scores 32446 (0.2% faster). This puts the i5-14400F in the upper mid-range tier for processing power, and the data shows that it does not bottleneck the RTX 3050 4 GB at any resolution. The CPU's 65 W TDP and 10 nm process node (Raptor Lake architecture) allow for sustained performance without thermal throttling, which is important for maintaining consistent frame times.

The measured FPS scaling from 1080p to 4K is almost entirely attributable to GPU load, not CPU limitations. If the CPU were the bottleneck, we would expect similar frame rates across resolutions, but the data shows a 66% drop from 1080p to 4K at Low settings (155.9 to 52.7 FPS). This confirms that the RTX 3050 4 GB is the limiting component. The CPU's 16 threads handle the simulation's physics and logic updates efficiently, and the 4.70 GHz boost clock ensures that frame pacing remains consistent even when multiple system components are being simulated on screen.

FAQ

Q: What is the best resolution for this combo to maintain 60+ FPS?

A: The data shows 1080p is the only resolution where all presets exceed 60 FPS, with Low at 155.9 FPS, Medium at 111.3 FPS, High at 79.1 FPS, and Ultra at 77.5 FPS. At 1440p, only Low (100.7 FPS) and Medium (71.7 FPS) maintain 60+ FPS.

Q: Is 4K playable with this configuration?

A: No preset at 4K reaches 60 FPS. The best result is Low at 52.7 FPS, followed by Medium at 36 FPS, High at 28.1 FPS, and Ultra at 24.9 FPS. For smooth gameplay, 4K should be avoided.

Q: How much performance is lost when going from 1080p to 1440p?

A: At Low settings, FPS drops from 155.9 to 100.7 (a 35% reduction). At High settings, it drops from 79.1 to 50.6 (a 36% reduction), and at Ultra from 77.5 to 49.4 (a 36% reduction).

Q: What is the difference between High and Ultra settings at 1080p?

A: At 1080p, High averages 79.1 FPS while Ultra averages 77.5 FPS — a difference of only 1.6 FPS. The visual upgrade from Ultra may not justify the negligible performance cost at this resolution.

Q: Does the RTX 3050 4 GB's VRAM capacity affect performance?

A: Yes. The 4 GB VRAM is likely a limiting factor at 4K, where even Low settings only achieve 52.7 FPS. The 192.0 GB/s bandwidth and 128-bit bus struggle with 4K textures, causing significant performance degradation compared to lower resolutions.

Q: How does this combo rank among all tested configurations?

A: It ranks 1587th out of 1769 tested combos, placing it in the bottom 10% of all configurations for Pc Building Simulator, which reflects the GPU's mid-range positioning.

Settings Recommendations

For the best balance of visual quality and performance, the data points to 1080p High as the optimal configuration. At this setting, the combo averages 79.1 FPS, which is comfortably above the 60 FPS threshold, and the difference from Ultra (77.5 FPS) is only 1.6 FPS — making High visually near-identical to Ultra while providing a small performance buffer. Users with 1440p monitors should select Medium settings, which delivers 71.7 FPS and maintains smooth gameplay, while High at 1440p drops to 50.6 FPS and Ultra to 49.4 FPS, both below the 60 FPS target.

The data clearly shows that Low settings are unnecessary at 1080p, as even Ultra achieves 77.5 FPS. However, at 4K, Low is the only viable preset for playable frame rates at 52.7 FPS, though this is still below 60 FPS and may feel sluggish in fast-paced simulation scenarios. The measured FPS values indicate that Medium settings at 1440p (71.7 FPS) provide a better experience than High at 4K (28.1 FPS), so users should prioritize resolution and preset balance accordingly.

For users who prioritize frame rate over visual fidelity, 1440p Low at 100.7 FPS offers the highest refresh rate experience outside of 1080p. Conversely, those who value visuals and can tolerate 50 FPS should consider 1440p High (50.6 FPS) as a viable compromise. The Ultra preset, regardless of resolution, provides diminishing returns — at 1080p it is only 1.6 FPS slower than High, but at 1440p it drops to 49.4 FPS and at 4K it becomes unplayable at 24.9 FPS.

Measured FPS Breakdown

The complete measured FPS table for Pc Building Simulator with the Intel Core i5-14400F and NVIDIA GeForce RTX 3050 4 GB is as follows:

1920x1080 (1080p):

  • Low: 155.9 FPS
  • Medium: 111.3 FPS
  • High: 79.1 FPS
  • Ultra: 77.5 FPS

2560x1440 (1440p):

  • Low: 100.7 FPS
  • Medium: 71.7 FPS
  • High: 50.6 FPS
  • Ultra: 49.4 FPS

3840x2160 (4K):

  • Low: 52.7 FPS
  • Medium: 36.0 FPS
  • High: 28.1 FPS
  • Ultra: 24.9 FPS

The data reveals several notable patterns. First, the gap between High and Ultra is minimal at 1080p (1.6 FPS) and 1440p (1.2 FPS), but widens slightly at 4K (3.2 FPS), suggesting that Ultra settings introduce marginal additional GPU load that becomes more impactful at higher resolutions. Second, the step from Low to Medium costs roughly 29% performance at 1080p (155.9 to 111.3 FPS) and 29% at 1440p (100.7 to 71.7 FPS), but only 32% at 4K (52.7 to 36.0 FPS), indicating that the GPU's fixed overhead becomes relatively more significant at lower frame rates. Third, the jump from Medium to High costs 29% at 1080p (111.3 to 79.1 FPS) and 29% at 1440p (71.7 to 50.6 FPS), showing consistent scaling across settings tiers.

The 4K data points are particularly telling: even Low settings (52.7 FPS) barely approach 60 FPS, and the progression from Low to Ultra (52.7 → 36.0 → 28.1 → 24.9 FPS) demonstrates that the RTX 3050 4 GB's rendering pipeline saturates quickly as settings increase. The 192.0 GB/s memory bandwidth and 4 GB VRAM capacity are the likely culprits, as 4K textures require substantial memory allocation and bandwidth that this card cannot provide sustainably.

How This Combo Ranks

The Intel Core i5-14400F + NVIDIA GeForce RTX 3050 4 GB combination ranks 1587th out of 1769 tested combos in Pc Building Simulator, placing it in the bottom 10% of all configurations. This low ranking is primarily attributable to the GPU's mid-range positioning (50th percentile among all GPUs) combined with the game's demanding rendering requirements at higher resolutions. The CPU, by contrast, ranks in the 88th percentile among all processors, with an average benchmark score of 32508.

The disparity between CPU and GPU capabilities is stark. The i5-14400F's Cinebench R23 multi-core score of 21914 and single-core score of 3093 indicate strong processing power that rivals high-end mobile chips, while the RTX 3050 4 GB's 4 GB VRAM and 192.0 GB/s bandwidth place it firmly in entry-level territory for modern games. This bottleneck is reflected in the measured FPS data, where the combo fails to break 53 FPS at 4K even at Low settings.

In the context of all tested combos, this configuration occupies a niche for 1080p gaming at high refresh rates (155.9 FPS at Low) and 1440p gaming at medium settings (71.7 FPS). The ranking of 1587 out of 1769 suggests that most other combinations deliver better overall performance, particularly at higher resolutions. The combo's performance is consistent with its hardware specifications: the CPU provides headroom for future GPU upgrades, but the current GPU limits the system to 1080p-centric workloads. Users with this combo should focus on 1080p gaming or be prepared to lower settings significantly at 1440p, as the data shows no path to smooth 4K gameplay.

Hardware Specifications

Intel Core i5-14400F

Cores / Threads 10 / 16
Base Clock 2500 MHz
Boost Clock 4700 MHz
TDP 65W
Socket Intel Socket 1700
View Full CPU Details →

NVIDIA GeForce RTX 3050 4 GB

VRAM 4 GB GDDR6
Base Clock —
Boost Clock 1740 MHz MHz
TDP 90 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core i5-14400F + NVIDIA GeForce RTX 3050 4 GB in Pc Building Simulator

Resolution Settings Avg FPS
3840x2160 Low 52.7
3840x2160 Medium 36.0
3840x2160 High 28.1
3840x2160 Ultra 24.9
2560x1440 Low 100.7
2560x1440 Medium 71.7
2560x1440 High 50.6
2560x1440 Ultra 49.4
1920x1080 Low 155.9
1920x1080 Medium 111.3
1920x1080 High 79.1
1920x1080 Ultra 77.5

Pc Building Simulator with RTX 3050 4 GB + Other CPUs

See how Pc Building Simulator performs with the same GPU but different processors.

Other Games with ii5-14400F + RTX 3050 4 GB

Explore FPS benchmarks for other games using this same hardware combination.