Pc Building Simulator
This combination delivers exceptional performance with an average of 139 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 47 | 53 | 75 | 106 |
| 1440p QHD | 97 | 97 | 141 | 201 |
| 1080p Full HD | 152 | 160 | 225 | 317 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Pc Building Simulator with AMD Ryzen 7 5800X + NVIDIA GeForce RTX 3070 Ti, In-Depth Analysis
Pc Building Simulator is a simulation title that stresses system assembly and configuration rather than raw graphical fidelity, yet the measured frame rates for the AMD Ryzen 7 5800X and NVIDIA GeForce RTX 3070 Ti combination reveal a clear performance curve across resolutions and presets. The data shows a system that is exceptionally capable at 1080p, remains fluid at 1440p, and begins to show its limits at 4K with higher quality settings. The RTX 3070 Ti’s 8 GB of GDDR6X memory and 608.3 GB/s bandwidth are central to understanding these results, as are the CPU’s 8 cores and 16 threads of Zen 3 architecture. This analysis breaks down the measured frames, ranking, and component roles using only the provided benchmark data.
Resolution Scaling
The transition from 1080p to 4K produces a dramatic drop in average frame rates, indicating that the GPU becomes the primary bottleneck as pixel count increases. At High settings, the system delivers 160 FPS at 1920x1080, but this falls to 97.4 FPS at 2560x1440—a 39.1% reduction—and further to 53 FPS at 3840x2160, which is a 66.9% decrease from the 1080p figure. This steep decline is characteristic of a graphics card being pushed to its limits, particularly with only 8 GB of VRAM, rather than a CPU limitation, since the Ryzen 7 5800X’s 16 threads provide ample headroom for a simulation game.
The scaling pattern is consistent across all presets, though the absolute drop varies. At Low settings, the system achieves 317 FPS at 1080p, 201.1 FPS at 1440p, and 105.9 FPS at 4K. The 4K Low result is still above 60 FPS, which suggests that even at this resolution, the combination can maintain playable frame rates when graphical demands are reduced. The gap between Low and Ultra at 4K is particularly telling: 105.9 FPS versus 47.3 FPS, a 55.3% performance reduction from simply raising settings. This indicates that the RTX 3070 Ti’s memory bandwidth and shading units (6144 total) are being saturated by the higher-quality textures and effects at 4K, rather than the CPU struggling to feed the GPU.
At 1440p, the results are more balanced. The difference between Low (201.1 FPS) and High (97.4 FPS) is 103.7 FPS, while Ultra (96.5 FPS) is nearly identical to High. This suggests that at 1440p, the GPU still has enough headroom to handle most settings without collapsing, but the jump from Low to Medium (140.7 FPS) shows a significant 60.4 FPS loss, indicating that memory-intensive effects are the first to impact performance. The 1080p data reinforces this interpretation: even at Ultra, the system holds 152.4 FPS, which is well above the 1440p High result, proving that the resolution itself—not the settings—is the dominant factor in frame rate decline.
How This Combo Ranks
The combination of the AMD Ryzen 7 5800X and NVIDIA GeForce RTX 3070 Ti ranks 699th out of 1769 tested combos within Pc Building Simulator, placing it in the 60.5th percentile of all configurations. This is a mid-to-upper-tier position, reflecting that while the pairing is strong, it is not among the elite for this specific game. The CPU alone sits at the 84th percentile against all tested processors, with an average benchmark score of 27606, while the GPU holds the 74th percentile with an average score of 30849. The combined rank suggests that the game’s demands align more closely with GPU capability, and the RTX 3070 Ti’s percentile is the limiting factor in the overall placement.
Comparing the CPU to its nearest rivals, the Ryzen 7 5800X is nearly identical in performance to the AMD Ryzen 7 5800, with a 0.3% higher average score (27606 versus 27535). It also slightly edges out the AMD Ryzen 5 8500GE and Intel Core i7-13700H, both of which score 0.4% lower, and the Intel Core i5-12600KF, which is 0.8% lower. These margins are negligible in real-world gaming, meaning the CPU choice is unlikely to be the differentiator in this game’s frame rates. The GPU, however, shows more variance among its rivals: the RTX 3070 Ti is 0.3% ahead of the AMD Radeon RX 590 GME (30849 versus 30755) but trails the AMD Radeon RX 6700 by 0.8% and the NVIDIA Quadro M5000 by 0.9%. These small deltas indicate that the GPU’s rank is tightly contested, and the 699th placement out of 1769 combos reflects a configuration that is solid but not exceptional for Pc Building Simulator.
GPU Role
The NVIDIA GeForce RTX 3070 Ti’s specifications directly explain its behavior in this game. With 8 GB of GDDR6X memory on a 256-bit bus, the card has a memory bandwidth of 608.3 GB/s, which is substantial but not unlimited. The measured frame rates show that at 4K Ultra, the system drops to 47.3 FPS, suggesting that the VRAM capacity is being exhausted or the memory controller is saturated. The boost clock of 1770 MHz and base clock of 1575 MHz are typical for the Ampere architecture, and the 6144 shading units provide the raw compute power, but the game’s simulation nature may rely more on memory throughput than pure shader performance.
The GPU’s average benchmark score of 30849, with a 74th percentile rank, places it slightly above mid-pack. In direct comparison, the RTX 3070 Ti is 0.3% faster than the RX 590 GME but 0.8% slower than the RX 6700. This indicates that within Pc Building Simulator, the card is competitive but not dominant. The 8 GB VRAM is likely the key constraint at 4K, as the drop from Medium (74.8 FPS) to High (53 FPS) at 3840x2160 is a 29.1% reduction, which is too steep to be purely compute-bound. The 19 Gbps effective memory speed helps at lower resolutions, where the system achieves 317 FPS at 1080p Low, but the scaling to 4K reveals the memory subsystem’s limits.
The GPU’s end-of-life production status and 290 W TDP are worth noting, but the benchmark results are what matter for gameplay. At 1440p, the card performs admirably, with Ultra settings hitting 96.5 FPS, which is close to the 97.4 FPS at High. This suggests that the card is not heavily memory-limited at this resolution, and the settings difference between High and Ultra is minimal. The 4K results are the only place where the GPU clearly struggles, and even then, Low settings deliver 105.9 FPS, proving that the hardware is capable when the game’s visual load is reduced.
Settings Recommendations
Based on the measured FPS rows, the ideal preset depends on the target resolution, but the data consistently favors Medium or High for most scenarios. At 1920x1080, all presets are playable, with Low at 317 FPS, Medium at 224.7 FPS, High at 160 FPS, and Ultra at 152.4 FPS. The difference between High and Ultra is only 7.6 FPS, making Ultra the better choice for visual quality without sacrificing smoothness. However, for maximum frame rates, Low is excessive, and Medium offers a balanced 224.7 FPS. For a simulation game that may involve UI-heavy scenes, Medium at 1080p is a safe recommendation, as it provides over 200 FPS while maintaining better visuals than Low.
At 2560x1440, the choice is clearer. Ultra (96.5 FPS) and High (97.4 FPS) are nearly identical, with only 0.9 FPS separating them, so High is the logical pick to save on GPU load without a perceivable difference. Medium (140.7 FPS) is the best option for a high-refresh-rate monitor, as it offers a 44.4% improvement over High while still looking good. Low (201.1 FPS) is only necessary for extreme refresh rates, and the visual sacrifice is likely not worth it for this genre. For 1440p, Medium is the sweet spot, providing a 140.7 FPS average with enough headroom for scene complexity.
At 3840x2160, the situation is more constrained. Ultra (47.3 FPS) and High (53 FPS) are both below 60 FPS, which may cause noticeable stuttering in a simulation that tracks many objects. Medium (74.8 FPS) is the minimum recommended preset for 4K, as it stays above 60 FPS and offers a 41.1% improvement over High. Low (105.9 FPS) is the only preset that provides a truly smooth 4K experience, but it sacrifices significant visual fidelity. Given that the game is a simulation, gameplay fluidity is paramount, so Medium at 4K is the best compromise, while High is acceptable if the user prefers visuals over frame rate. No preset should be set to Ultra at 4K, as the 47.3 FPS result is too close to the 45 FPS threshold for comfort in a game that may have complex scene updates.
FAQ
Q: What is the best resolution to play Pc Building Simulator with this CPU and GPU combo?
A: The data shows that 1440p with Medium settings provides a 140.7 FPS average, which is the best balance of smoothness and visual quality. At 1080p, Ultra delivers 152.4 FPS, but 1440p Medium offers higher resolution with only a 7.7% FPS drop.
Q: Can this system run 4K at 60 FPS?
A: Yes, but only with Low settings, which achieve 105.9 FPS at 3840x2160. Medium settings drop to 74.8 FPS, which is still above 60, but High and Ultra fall below at 53 and 47.3 FPS respectively.
Q: How does the Ryzen 7 5800X compare to its closest rival in performance?
A: The Ryzen 7 5800X has an average benchmark score of 27606, which is 0.3% higher than the AMD Ryzen 7 5800 (27535). It also outperforms the AMD Ryzen 5 8500GE and Intel Core i7-13700H by 0.4% each.
Q: Is the RTX 3070 Ti a bottleneck at any resolution?
A: The GPU is the limiting factor at 4K, where even High settings yield only 53 FPS. At 1080p and 1440p, the card is not a bottleneck, as it delivers over 96 FPS at Ultra in both cases.
Q: What is the performance difference between High and Ultra settings at 1440p?
A: The difference is minimal, with High at 97.4 FPS and Ultra at 96.5 FPS, a margin of just 0.9 FPS. This indicates that Ultra offers no meaningful benefit over High at this resolution.
Q: Does the CPU’s 16-thread capability impact the game’s frame rates?
A: The Ryzen 7 5800X’s 16 threads provide ample processing power, as evidenced by its 84th percentile CPU rank. The measured FPS drops from 1080p to 4K are consistent with GPU limitations, not CPU bottlenecks.
Hardware Specifications
AMD Ryzen 7 5800X
NVIDIA GeForce RTX 3070 Ti
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 5800X + NVIDIA GeForce RTX 3070 Ti in Pc Building Simulator
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 105.9 |
| 3840x2160 | Medium | 74.8 |
| 3840x2160 | High | 53.0 |
| 3840x2160 | Ultra | 47.3 |
| 2560x1440 | Low | 201.1 |
| 2560x1440 | Medium | 140.7 |
| 2560x1440 | High | 97.4 |
| 2560x1440 | Ultra | 96.5 |
| 1920x1080 | Low | 317.0 |
| 1920x1080 | Medium | 224.7 |
| 1920x1080 | High | 160.0 |
| 1920x1080 | Ultra | 152.4 |
Pc Building Simulator with Ryzen 7 5800X + Other GPUs
See how Pc Building Simulator performs with the same CPU but different graphics cards.
Pc Building Simulator with RTX 3070 Ti + Other CPUs
See how Pc Building Simulator performs with the same GPU but different processors.
Other Games with Ryzen 7 5800X + RTX 3070 Ti
Explore FPS benchmarks for other games using this same hardware combination.