Pc Building Simulator

# Pc Building Simulator with AMD Ryzen 7 5700G + NVIDIA GeForce RTX 5090 D

Pc Building Simulator, a simulation title from 2019, presents an unusual workload where the RTX 5090 D's immense graphics horsepower meets a CPU-bound simulation logic. The measured FPS data reveals a configuration that scales dramatically with resolution and settings, with the GPU clearly dominating at higher resolutions while the CPU becomes a factor at 1080p. This combination ranks 130th out of 3002 tested combos in the game, placing it in the top 5% of all configurations, with the data indicating a system that delivers playable framerates across all tested scenarios.

Resolution Scaling

The resolution scaling pattern in Pc Building Simulator shows a clear and predictable decline in average FPS as pixel count increases, but the magnitude of that decline varies significantly by quality preset. At Low settings, the drop from 1080p to 1440p is steep—from 331 FPS down to 284 FPS, a 14% reduction—but the jump to 4K brings a more pronounced 34% decrease, landing at 187 FPS. This suggests that at Low settings, the GPU is still the primary limiter even at 1080p, though the CPU begins to assert influence at lower resolutions.

The Medium preset tells a similar story with slightly different proportions. Starting at 291 FPS in 1080p, the framerate falls to 249 FPS at 1440p (a 14% drop) and then to 133 FPS at 4K (a 47% drop). The larger penalty from 1440p to 4K at Medium settings compared to Low indicates that the additional shading work at Medium settings creates a heavier GPU load, making the graphics card the dominant bottleneck at higher resolutions.

High settings exhibit the most linear scaling of all presets. The 1080p result of 255 FPS drops to 179 FPS at 1440p (30% lower) and then to 94 FPS at 4K (47% lower than 1440p). This consistent scaling pattern suggests that High settings distribute the workload more evenly between CPU and GPU across resolutions, with neither component becoming a disproportionate bottleneck. The Ultra preset follows a similar trajectory: 251 FPS at 1080p, 171 FPS at 1440p (32% drop), and 89 FPS at 4K (48% drop).

The data reveals that the most dramatic resolution penalty occurs when moving from 1440p to 4K at Medium, High, and Ultra settings, where framerates roughly halve. This indicates that at 4K, the RTX 5090 D's rendering workload becomes the limiting factor, with its 32 GB of GDDR7 memory and 1.79 TB/s bandwidth being taxed by the higher pixel count. Conversely, the relatively small gaps between 1080p and 1440p results—typically 14-32%—suggest that the CPU, with its 8 cores and 16 threads, can keep pace with the GPU's output at these resolutions without becoming a severe constraint.

CPU Role

The AMD Ryzen 7 5700G is a Zen 3-based processor with 8 cores and 16 threads, running at a base clock of 3.80 GHz and boosting to 4.60 GHz. Its 16 MB of L3 cache and dual-channel DDR4 memory support with 51.2 GB/s bandwidth provide the foundation for simulation logic in Pc Building Simulator. The CPU's benchmark scores indicate solid multi-threaded performance, with a Cinebench R23 multicore score of 12830.5 and a Geekbench multicore score of 9950, placing it in the 79th percentile of all CPUs.

The 5700G's single-thread performance, while respectable at 1494 in Cinebench R23 and 1894 in Geekbench, becomes relevant when examining the 1080p results. At Low settings with 1080p resolution, the system achieves 331 FPS, which is the highest measured figure in the entire dataset. This extreme framerate suggests that the CPU is approaching its limit, as simulation titles often have serial components that cannot be fully parallelized across all 16 threads.

The CPU's nearest rivals in average benchmark score include the Intel Core i9-9900K (27097, deltaPct -0.2), the AMD Ryzen AI 7 445 (26936, deltaPct 0.4), and the Intel Core i7-1370P (26900, deltaPct 0.6). These deltas are all within 1% of the 5700G's average score of 27051, indicating that the processor performs on par with these alternatives. For Pc Building Simulator, this means the CPU is unlikely to be the primary differentiator between configurations, but its 8-core/16-thread design ensures it can handle the game's background simulation tasks without stuttering.

The 1080p Medium and High results—291 FPS and 255 FPS respectively—suggest that the CPU still has headroom at these settings, as the framerates remain well above the 1440p results for the same presets. However, the 1080p Ultra result of 251 FPS is nearly identical to the High result of 255 FPS, with only a 1.6% difference. This convergence indicates that at 1080p, the CPU is beginning to become the limiting factor at higher quality settings, as the GPU's additional workload does not translate into proportionally higher framerates.

The 3DMark 16-thread score of 6629 and max-thread score of 6627 show that the CPU scales well with thread count, but the single-thread score of 899 suggests that Pc Building Simulator's simulation logic, which may rely on single-threaded performance, could benefit from higher clock speeds. The boost clock of 4.60 GHz provides reasonable single-thread performance, but the data shows that the CPU does not prevent the system from achieving playable framerates at any tested resolution or setting.

GPU Role

The NVIDIA GeForce RTX 5090 D is the undisputed star of this configuration, featuring 32 GB of GDDR7 memory on a 512-bit bus with 1.79 TB/s of bandwidth. Its Blackwell 2.0 architecture includes 21760 shading units, 680 TMUs, and 176 ROPs, with base and boost clocks of 2017 MHz and 2407 MHz respectively. The GPU's benchmark results are equally imposing, with a 3DMark Steel Nomad DX12 score of 14326 and a Passmark G3D score of 44065, placing it in the 92nd percentile of all GPUs.

The GPU's role in Pc Building Simulator becomes increasingly important as resolution rises. At 4K, the framerate differences between settings are stark: 89 FPS at Ultra, 94 FPS at High, 133 FPS at Medium, and 187 FPS at Low. This 2.1x spread between Low and Ultra at 4K demonstrates that the RTX 5090 D's rendering capabilities are the primary determinant of performance at this resolution. The GPU's 32 GB of VRAM is more than sufficient for any texture or geometry requirements the game can present, but the sheer pixel count at 4K still demands significant processing power.

The GPU's nearest rivals in average benchmark score are the AMD Radeon RX 6650M XT (76904, deltaPct 1.1), the AMD Radeon RX 6850M XT (78940, deltaPct -1.6), the NVIDIA Tesla P100 PCIe 12 GB (79396, deltaPct -2.1), and the NVIDIA Tesla P100 PCIe 16 GB (79605, deltaPct -2.4). These comparisons show the RTX 5090 D outperforming its nearest competitors by 1-2%, with an average benchmark score of 77712. In Pc Building Simulator, this performance advantage translates into the ability to maintain high framerates even at 4K Ultra, where the system still delivers 89 FPS.

The 1440p results further illustrate the GPU's dominance. At 1440p Medium, the system achieves 249 FPS with a minimum of 212 FPS and maximum of 287 FPS, showing consistent performance. The 1440p High result of 179 FPS and Ultra result of 171 FPS indicate that the GPU handles these settings with ease, leaving headroom for higher refresh rate displays. The fact that 1440p Ultra (171 FPS) outperforms 4K Medium (133 FPS) by 29% highlights how pixel count affects the GPU more than quality settings, as the 4K resolution requires processing four times the pixels of 1080p.

The GPU's memory clock of 1750 MHz (28 Gbps effective) and 1.79 TB/s bandwidth ensure that texture streaming and memory-intensive operations do not become bottlenecks. The 104.8 TFLOPS of FP32 compute power provides ample shading capability for the game's rendering workload. This is reflected in the 4K results, where even at Ultra settings, the system maintains an average of 89 FPS, well above the 60 FPS threshold for smooth gameplay.

FAQ

Q: What is the best resolution for this configuration in Pc Building Simulator?

A: The data shows that 1440p provides the best balance of performance and visual quality. At 1440p High, the system achieves 179 FPS, while 1440p Ultra delivers 171 FPS. Both are well above the 1440p Medium result of 249 FPS, but the Ultra and High settings would provide better visual fidelity without sacrificing playability.

Q: How does the RTX 5090 D compare to its nearest rival in terms of benchmark score?

A: The RTX 5090 D has an average benchmark score of 77712, which is 1.1% higher than the AMD Radeon RX 6650M XT (76904) and 1.6% higher than the AMD Radeon RX 6850M XT (78940). It trails the NVIDIA Tesla P100 PCIe 16 GB (79605) by 2.4%.

Q: Is the Ryzen 7 5700G a bottleneck at 1080p in this game?

A: The evidence suggests the CPU becomes a limiting factor at 1080p with higher quality settings. The 1080p High result of 255 FPS and Ultra result of 251 FPS are nearly identical, differing by only 1.6%, which indicates that increasing GPU load does not yield proportional framerate gains at this resolution.

Q: What is the most demanding settings combination tested?

A: The most demanding combination is 4K Ultra, which produces an average of 89 FPS. This is the lowest measured framerate in the dataset, followed closely by 4K High at 94 FPS. The 4K Medium result of 133 FPS shows a significant improvement over the higher settings.

Q: How much faster is 1080p Low compared to 4K Ultra?

A: The 1080p Low setting achieves 331 FPS, which is 3.7 times faster than the 4K Ultra result of 89 FPS. This substantial difference highlights the GPU's workload scaling with resolution, as the same quality settings at 4K require significantly more processing power.

Q: Does the system maintain consistent framerates at 1440p Medium?

A: Yes, the 1440p Medium setting shows a minimum of 212 FPS, a maximum of 287 FPS, and an average of 249 FPS. This 75 FPS range between minimum and maximum indicates some variability, but the minimum remains well above playable thresholds.

Settings Recommendations

For Pc Building Simulator, the measured data provides clear guidance on settings optimization. At 4K, the Medium preset offers the best experience, delivering 133 FPS with a minimum of 113 FPS and maximum of 153 FPS. This provides a 40% improvement over High settings (94 FPS) while maintaining smooth gameplay, and the 44 FPS advantage over Ultra (89 FPS) makes Medium the clear choice for 4K gaming on this hardware.

At 1440p, the High preset at 179 FPS and Ultra at 171 FPS are both excellent options, with the 8 FPS difference between them being negligible. The Medium preset's 249 FPS is the highest framerate at this resolution, but the visual quality trade-off may not be worth the extra 70 FPS when High already exceeds 170 FPS. For gamers with high refresh rate 1440p monitors, Medium at 249 FPS would maximize smoothness, while those prioritizing visuals should select Ultra at 171 FPS.

The 1080p results show that even Ultra settings at 251 FPS are playable, but the diminishing returns between High (255 FPS) and Ultra (251 FPS) suggest that High is the more efficient choice. The Medium preset at 291 FPS offers the best framerate-to-quality ratio for competitive play, but the 331 FPS Low setting demonstrates the CPU's capability to push extreme framerates if needed.

The overall recommendation is to use Medium settings at 4K for the best balance of visual quality and performance, High settings at 1440p for a premium experience, and High or Ultra at 1080p depending on whether visual fidelity or maximum framerate is preferred. The minimum framerate data for Medium settings at 4K (113 FPS) and 1440p (212 FPS) confirms that these configurations maintain smooth performance without significant drops.

Measured FPS Breakdown

The complete measured FPS dataset for this configuration reveals the full performance envelope across all tested scenarios. At 3840x2160 (4K), the Ultra preset delivers an average of 89 FPS with no minimum or maximum reported. The High preset improves to 94 FPS average, while the Medium preset achieves 133 FPS with a minimum of 113 FPS and maximum of 153 FPS. The Low preset at 4K reaches 187 FPS, showing the GPU's headroom when quality settings are reduced.

The 2560x1440 (1440p) results show significantly higher framerates. The Low preset leads with 284 FPS, followed by Medium at 249 FPS (minimum 212, maximum 287), High at 179 FPS, and Ultra at 171 FPS. The 1440p results demonstrate that this resolution is well within the capabilities of the RTX 5090 D, with even the most demanding settings exceeding 170 FPS.

At 1920x1080 (1080p), the system achieves its highest framerates. The Low preset produces 331 FPS, Medium delivers 291 FPS (minimum 247, maximum 334), High reaches 255 FPS, and Ultra manages 251 FPS. The 1080p results show the CPU's influence, as the gap between High and Ultra narrows to just 4 FPS, indicating that the Ryzen 7 5700G is nearing its limit at these settings.

Across all resolutions, the Medium preset consistently provides the highest minimum framerates among the quality settings, with 113 FPS at 4K and 212 FPS at 1440p. This suggests that Medium settings offer the most consistent performance, while High and Ultra presets may experience more variability in demanding scenes. The data also shows that the RTX 5090 D's 32 GB of VRAM and 1.79 TB/s bandwidth are never taxed to the point of causing frame drops, as even the most demanding 4K Ultra scenario maintains an average above 85 FPS.