Pc Building Simulator

The AMD Ryzen 7 5700 and NVIDIA GeForce RTX 2060 combination delivers a highly playable experience in Pc Building Simulator, but the data clearly shows that the GeForce RTX 2060 is the primary limiting factor as resolution increases. At 1080p, the system is exceptionally fast, but the frame rate drops dramatically when moving to 4K, indicating that the GPU's 6 GB VRAM and compute resources are being saturated. The combo ranks in the bottom half of all tested configurations, placing it at 1443 out of 1769, which is a below-average standing for this simulation title.

Resolution Scaling

The measured FPS data reveals a steep performance curve as resolution scales from 1920x1080 to 3840x2160. At High settings, the average frame rate falls from 101 FPS at 1080p to 67.3 FPS at 1440p, a drop of 33.7 FPS, and then to 35.2 FPS at 4K, which is a further reduction of 32.1 FPS. This pattern—a near-halving of performance at each step—points directly to the GPU as the bottleneck. The RTX 2060's 6 GB GDDR6 memory on a 192-bit bus with 336.0 GB/s bandwidth struggles to feed the pixel throughput required at 4K, where the pixel rate of 80.64 GPixel/s becomes the limiting factor.

At Low settings, the scaling is even more pronounced. The system achieves 205.3 FPS at 1080p, but this plummets to 126.9 FPS at 1440p and then to 66.7 FPS at 4K. The fact that 4K Low (66.7 FPS) is still slower than 1080p Ultra (95.1 FPS) confirms that the GPU's raw throughput, not the game's visual complexity, is the ceiling. Conversely, the CPU shows no signs of struggle: the Ryzen 7 5700's 8 cores and 16 threads, boosting to 4.60 GHz, are more than adequate for a simulation game that does not demand high thread counts. The data suggests that at 1080p and 1440p, the CPU has headroom, but at 4K, the RTX 2060 cannot keep pace, making resolution the dominant variable in performance variance.

Settings Recommendations

For the best balance of visual fidelity and frame rate, the High preset at 1440p is the sweet spot, delivering 67.3 FPS. This is comfortably above the 60 FPS threshold for smooth gameplay while still offering richer visuals than the Medium preset, which yields 94.1 FPS at the same resolution. At 1080p, High settings are the clear recommendation, with 101 FPS providing a fluid experience without the need to drop to Medium (146.4 FPS) or Low (205.3 FPS), which offer diminishing returns on visual quality for the extra speed.

At 4K, the situation is more constrained. Ultra settings are not viable, with an average of 34.9 FPS, and High is only marginally better at 35.2 FPS. The Medium preset at 48.6 FPS is the highest playable option, though it still falls short of the 60 FPS target. For users prioritizing frame rate over fidelity at 4K, Low settings at 66.7 FPS are the only way to achieve a smooth experience. The data indicates that the RTX 2060 is best utilized at 1080p or 1440p with High or Ultra settings, where it can maintain 60+ FPS, rather than pushing 4K resolution where its 6 GB memory capacity becomes a liability.

FAQ

Q: What is the best resolution for this combo?

A: The data supports 1920x1080 as the optimal resolution, with High settings delivering 101 FPS and Ultra at 95.1 FPS. At 1440p, High settings still hold 67.3 FPS, but 4K performance drops below 50 FPS on all presets except Low.

*Q: Can this system handle 4K gaming in Pc Building Simulator?*

A: Barely. At 4K, only Low settings achieve a playable 66.7 FPS. Medium drops to 48.6 FPS, and High/Ultra fall to 35.2 FPS and 34.9 FPS respectively, which are below the 60 FPS standard for smooth gameplay.

Q: How does the CPU affect performance in this game?

A: The Ryzen 7 5700 with 8 cores and 16 threads has a boost clock of 4.60 GHz and a base of 3.70 GHz, which is ample for this simulation. The frame rates at 1080p (205.3 FPS on Low) show that the CPU is not a bottleneck, as the GPU becomes the limiting factor at higher resolutions.

Q: Is the RTX 2060's 6 GB VRAM sufficient?

A: At 1080p and 1440p, yes. The 6 GB GDDR6 memory is enough for High settings, as seen with 101 FPS and 67.3 FPS respectively. However, at 4K, the memory bandwidth of 336.0 GB/s and the 192-bit bus are insufficient, causing a sharp performance drop.

Q: What is the difference between Low and Ultra at 1080p?

A: The difference is 110.2 FPS. Low settings achieve 205.3 FPS, while Ultra drops to 95.1 FPS. The gap narrows at higher resolutions, with only 31.8 FPS difference at 4K, indicating that GPU limits compress the performance range.

Q: How does this combo rank against other tested systems?

A: The combination ranks 1443 out of 1769 tested combos, placing it in the bottom 20% of all configurations for this game. This is a below-average result, reflecting the GPU's age and memory constraints.

How This Combo Ranks

The combo's rank of 1443 out of 1769 tested configurations places it firmly in the lower third of all systems benchmarked for Pc Building Simulator. This is a weak showing, and the data suggests that the RTX 2060 is the primary reason for the mediocre standing. The GPU's percentile vs all GPUs is 58, meaning it outperforms only 58% of all graphics cards, while the CPU's percentile is 84, indicating it is a strong processor. This mismatch—a high-performing CPU paired with a mid-range GPU—creates a bottleneck that caps the system's overall capability.

In comparison to the GPU's nearest rivals, the RTX 2060 is within 1.8% of the AMD Radeon Pro W5500 and 0.5% of the AMD Radeon RX 7600S, but it trails the AMD Radeon Pro 5700 by 1.7%. This close grouping means that any of these cards would produce similar results in this game, but none of them are top-tier performers. The CPU, however, is 0.7% ahead of the Intel Core i9-9900K and 1.2% ahead of the AMD Ryzen AI 5 340, showing that the Ryzen 7 5700 is a competitive component that is not holding the system back. The overall rank is therefore a reflection of the GPU's limitations, not the CPU's.

CPU Role

The AMD Ryzen 7 5700 is a Zen 3 architecture processor built on TSMC's 7 nm process, featuring 8 cores and 16 threads. Its base clock of 3.70 GHz boosts up to 4.60 GHz, and it has a 16 MB L3 cache. For Pc Building Simulator, a simulation title, this level of multi-threading is more than sufficient. The benchmark scores confirm this: the Cinebench R23 multi-core score is 20655, and the single-core score is 2916, placing the CPU in the 84th percentile of all CPUs. The PassMark multithread score of 24303 further underscores its capability.

The data shows no CPU-bound scenarios in the measured FPS. At 1080p Low, the system hits 205.3 FPS, which is likely near the game engine's limit, but the CPU is not the constraint—the GPU is. The CPU's 3DMark scores, such as 6617 for max threads and 5585 for 8 threads, indicate strong scaling across cores, which is typical for a 5000-series desktop part. The 65 W TDP and dual-channel DDR4 support at 51.2 GB/s memory bandwidth provide a stable platform. The CPU's nearest rival, the Intel Core i9-9900K, is only 0.7% faster on average, meaning the Ryzen 7 5700 is essentially on par with a top-tier 2018 processor, but this does not translate to higher FPS in this game because the GPU is the limiting factor.

Measured FPS Breakdown

At 1920x1080, the system shows excellent performance across all settings. Low settings deliver 205.3 FPS, Medium 146.4 FPS, High 101 FPS, and Ultra 95.1 FPS. The gap between Low and Ultra is 110.2 FPS, but even the lowest preset is far above the 60 FPS threshold. At 2560x1440, the frame rates scale down predictably: Low 126.9 FPS, Medium 94.1 FPS, High 67.3 FPS, and Ultra 60.6 FPS. Here, Ultra barely maintains 60 FPS, while High is comfortable. At 3840x2160, performance drops significantly. Low settings still achieve 66.7 FPS, but Medium falls to 48.6 FPS, High 35.2 FPS, and Ultra 34.9 FPS. The difference between High and Ultra at 4K is only 0.3 FPS, suggesting that the GPU is fully saturated and additional settings have negligible impact.

The pattern across resolutions is consistent: Low settings always provide the highest FPS, and Ultra the lowest, but the magnitude of the difference shrinks as resolution grows. At 1080p, Low is 215.8% faster than Ultra, but at 4K, it is only 191.1% faster. This compression indicates that the GPU's compute units are exhausted at 4K, regardless of preset, making resolution the dominant factor in performance.

GPU Role

The NVIDIA GeForce RTX 2060 is a Turing architecture GPU on TSMC's 12 nm process, with a die size of 445 mm² and 10,800 million transistors. It has 1920 shading units, 120 TMUs, and 48 ROPs, with base and boost clocks of 1365 MHz and 1680 MHz, respectively. The 6 GB GDDR6 memory on a 192-bit bus provides 336.0 GB/s bandwidth, and the GPU supports DirectX 12 Ultimate. Its percentile vs all GPUs is 58, meaning it is a mid-pack performer.

In Pc Building Simulator, the RTX 2060's role is to render the simulation's interface and 3D models, which is not graphically intensive. However, the data shows that the GPU still becomes the bottleneck at higher resolutions. The 4K results, where High settings yield only 35.2 FPS, indicate that the 6 GB VRAM is insufficient for the texture and geometry demands at that resolution. The GPU's passmark G3D score of 14111 and DirectX 12 score of 53 are mediocre, and its nearest rivals are all within 1.8% of its performance, confirming that it is an average card. The 160 W TDP and 450 W suggested PSU are modest, but the GPU's end-of-life production status means it is dated. The 229 mm length and dual-slot design are standard, but the 1x 8-pin power connector limits its upgrade potential. Ultimately, the RTX 2060 is a capable 1080p and 1440p card, but its 6 GB memory and 192-bit bus hold it back at 4K, capping the combo's rank.