Pc Building Simulator

# Pc Building Simulator — AMD Ryzen 5 7400F + NVIDIA GeForce RTX 5070 Ti

The benchmark data for Pc Building Simulator with the AMD Ryzen 5 7400F and NVIDIA GeForce RTX 5070 Ti shows a combination that is heavily GPU-bound at higher resolutions but reveals surprising CPU headroom at 1080p. With measured frame rates spanning from 70 FPS at 4K Ultra to 370 FPS at 1080p Low, this system demonstrates exceptional scalability across the tested settings, placing it in the 296th position out of 3002 tested combos — a top 10% result that indicates strong overall performance for a simulation title that typically favors CPU throughput.

Resolution Scaling

The frame rate progression from 1080p to 4K reveals a classic GPU-bound curve with distinct inflection points. At 1080p High, the system delivers 221 FPS, which drops to 140 FPS at 1440p High — a 36.7% reduction — and further to 73 FPS at 4K High, representing a 67% decline from the 1080p baseline. This steep drop-off pattern indicates that the RTX 5070 Ti becomes the primary limiting factor as pixel count increases, while the Ryzen 5 7400F maintains sufficient throughput to keep feeding the GPU at lower resolutions.

The scaling behavior becomes more pronounced when examining the Low preset. At 1080p Low, the system achieves 370 FPS, which falls to 279 FPS at 1440p Low (a 24.6% reduction) and then to 146 FPS at 4K Low (a 60.5% reduction from 1080p). The relatively modest drop from 1080p to 1440p at Low settings suggests that the CPU is still capable of pushing very high frame rates, but the transition to 4K exposes the GPU's rendering limits even at minimal graphical fidelity.

Medium settings provide the most complete data with min/max frame measurements. At 1080p Medium, the average is 314 FPS with a minimum of 267 FPS and maximum of 361 FPS. Moving to 1440p Medium yields 198 FPS average (168 min, 228 max), and 4K Medium drops to 103 FPS (88 min, 119 max). The consistency of the frame pacing, as evidenced by the relatively narrow min-max ranges, indicates that neither component is experiencing severe bottlenecking at these settings.

Ultra settings show the most dramatic resolution scaling. The 4K Ultra result of 70 FPS represents a 66.8% reduction from the 1080p Ultra figure of 211 FPS, while 1440p Ultra sits at 133 FPS. This scaling curve strongly suggests that at 4K, the RTX 5070 Ti's rendering capabilities are the dominant constraint, with the CPU contributing little to overall performance at that resolution.

GPU Role

The NVIDIA GeForce RTX 5070 Ti brings substantial hardware resources to Pc Building Simulator, including 16 GB of GDDR7 memory on a 256-bit bus with 896.0 GB/s of bandwidth. The GPU operates with a base clock of 2295 MHz and a boost clock of 2452 MHz, with memory running at 1750 MHz (28 Gbps effective). These specifications translate into a pixel rate of 235.4 GPixel/s and a texture rate of 686.6 GTexel/s, which are directly relevant to a simulation game that renders detailed PC component models and workshop environments.

The 16 GB VRAM capacity is particularly notable for this game, as Pc Building Simulator's detailed component models and texture work can consume significant memory at higher resolutions. The measured frame rates suggest that VRAM capacity is not a limiting factor even at 4K Ultra, where the system still maintains 70 FPS. The GPU's 8960 shading units and 280 TMUs provide ample compute throughput for the game's rendering workload, as evidenced by the strong performance at 1440p where the system achieves 133-279 FPS depending on settings.

Comparing to the GPU's nearest rivals in the benchmark database, the RTX 5070 Ti's average benchmark score of 49957 places it slightly below the AMD Radeon RX 6900 XT (50951, 2% higher) and above the Intel Arc A550M (49737, 0.4% lower). The RX 6800 XT trails by 3.1% with a score of 48477. These comparisons contextualize the GPU's overall compute capability, though the actual gaming performance in Pc Building Simulator will depend on how well the game engine utilizes the Blackwell architecture's features.

FAQ

Q: What frame rate can I expect at 4K Ultra settings?

A: The measured average is 70 FPS at 3840x2160 with Ultra settings. This is the lowest result across all tested configurations but remains playable for a simulation title.

Q: How does the system perform at 1440p with Medium settings?

A: The measured average is 198 FPS with a minimum of 168 FPS and maximum of 228 FPS. This represents a strong balance between visual quality and performance.

Q: Is the CPU or GPU the limiting factor at 1080p?

A: At 1080p Low, the system reaches 370 FPS, which suggests the GPU is still keeping pace with the CPU. However, the Ryzen 5 7400F's 6 cores and 12 threads with a boost clock of 4.70 GHz appear sufficient to avoid becoming a bottleneck at these frame rates.

Q: What is the best resolution for competitive play?

A: For maximum frame rates, 1080p Low delivers 370 FPS average. If higher visual fidelity is desired, 1440p High at 140 FPS provides a strong balance for fast-paced gameplay.

Q: How does this combo rank compared to other tested systems?

A: The combination ranks 296th out of 3002 tested combos, placing it in the top 10% of all configurations tested for Pc Building Simulator.

Q: Does the 16 GB VRAM provide enough capacity for 4K textures?

A: The measured results at 4K Ultra show 70 FPS average, indicating that the 16 GB GDDR7 memory is sufficient for the game's highest settings without causing performance degradation.

Measured FPS Breakdown

At 1920x1080, the system delivers its highest frame rates across all settings. Low settings produce an average of 370 FPS, while Medium achieves 314 FPS with a minimum of 267 FPS and maximum of 361 FPS. High settings yield 221 FPS average, and Ultra settings produce 211 FPS. The relatively small gap between High and Ultra (10 FPS) suggests diminishing returns from the highest preset at this resolution.

Moving to 2560x1440, the performance remains strong but shows a clear step down. Low settings average 279 FPS, Medium averages 198 FPS (168 min, 228 max), High averages 140 FPS, and Ultra averages 133 FPS. The gap between High and Ultra narrows to just 7 FPS at this resolution, indicating that the Ultra preset's additional graphical effects have minimal impact on the GPU's workload at 1440p.

At 3840x2160, the system's performance drops significantly as the GPU becomes the primary constraint. Low settings average 146 FPS, Medium averages 103 FPS (88 min, 119 max), High averages 73 FPS, and Ultra averages 70 FPS. The difference between High and Ultra at 4K is only 3 FPS, suggesting that the game's Ultra preset adds features that are particularly demanding at this resolution without proportional visual benefit.

The Medium preset across all resolutions provides the most complete dataset with minimum and maximum frame measurements. These values show consistent frame pacing, with the minimum never falling below 71.5% of the average at any resolution. This consistency indicates that the system maintains stable performance without significant stuttering or frame drops.

How This Combo Ranks

The AMD Ryzen 5 7400F and NVIDIA GeForce RTX 5070 Ti combination ranks 296th out of 3002 tested combos for Pc Building Simulator. This top 10% placement reflects the system's strong overall performance, particularly considering the game's simulation genre that typically benefits from high CPU throughput.

In context, the CPU's average benchmark score of 32750 places it in the 83rd percentile of all tested processors. Its nearest rivals include the Intel Core i5-14600T (32707, 0.1% higher), AMD Ryzen 7 PRO 6850H (32812, 0.2% higher), and AMD Ryzen AI 7 PRO 360 (32662, 0.3% higher). These close margins indicate that the Ryzen 5 7400F is competitively positioned within its performance class.

The GPU's average benchmark score of 49957 places it in the 86th percentile of all tested graphics cards. Its nearest rivals show a mixed comparison: the AMD Radeon RX Vega 64 scores 50001 (0.1% higher), the Intel Arc A550M scores 49737 (0.4% lower), the AMD Radeon RX 6900 XT scores 50951 (2% higher), and the AMD Radeon RX 6800 XT scores 48477 (3.1% lower). These comparisons suggest the RTX 5070 Ti is well-matched to the CPU's performance tier, creating a balanced system that achieves its 296th rank through complementary strengths.

Settings Recommendations

For users prioritizing maximum frame rates, the Low preset at 1080p delivers 370 FPS average, which provides an extremely smooth experience for any competitive or high-refresh-rate scenario. However, given the game's simulation nature, the Medium preset at 1440p presents the most compelling balance, offering 198 FPS average with tight frame pacing (168 min, 228 max).

The High preset at 1440p (140 FPS) is a strong alternative for users who want improved visual fidelity without sacrificing responsiveness. At 4K, the Medium preset (103 FPS) is the recommended choice, as it maintains above-100 FPS performance while providing better visual quality than Low (146 FPS but with notably reduced graphical detail). The Ultra preset at any resolution shows minimal gains over High (3-10 FPS differences) while presumably adding significant visual effects, making it the least efficient choice for this configuration.

Given the measured data, the optimal experience depends on display resolution. For 1080p displays, Medium at 314 FPS offers an excellent balance. For 1440p, High at 140 FPS provides the best combination of visual quality and performance. For 4K, Medium at 103 FPS is the highest settings tier that maintains triple-digit frame rates.

CPU Role

The AMD Ryzen 5 7400F contributes 6 cores and 12 threads based on the Zen 4 architecture (Raphael codename) manufactured on a 5 nm process. With a base clock of 3.70 GHz and boost clock of 4.70 GHz, this processor delivers strong single-threaded performance that is crucial for simulation games like Pc Building Simulator, which often rely on a primary game thread for physics and logic calculations.

The CPU's benchmark results underscore its capability: Cinebench R23 multicore score of 21765 and single-core score of 3072, with PassMark single-thread and multithread scores of 3689 and 25645 respectively. The 32 MB shared L3 cache and 83.2 GB/s memory bandwidth provide sufficient data throughput for the game's asset loading and simulation state management.

The CPU's percentile ranking of 83rd among all tested processors, with an average benchmark score of 32750, places it slightly above the Intel Core i5-14600T (32707) and below the AMD Ryzen 7 PRO 6850H (32812). This positioning indicates that the Ryzen 5 7400F offers competitive processing power that complements the RTX 5070 Ti's capabilities.

At 1080p with Low settings, the system achieves 370 FPS, which approaches the practical limits of what the CPU can sustain in this game. The fact that performance scales from 370 FPS at 1080p Low to 279 FPS at 1440p Low (a 24.6% reduction) suggests that the CPU remains capable of high frame rates even when the GPU's workload increases. However, at 4K, the CPU's role diminishes as the GPU becomes the clear bottleneck, evidenced by the 146 FPS at 4K Low being primarily limited by the RTX 5070 Ti's pixel throughput rather than the processor's compute capabilities.