Pc Building Simulator

# Pc Building Simulator Performance Analysis: AMD Ryzen 5 5600X + NVIDIA GeForce RTX 2060

The AMD Ryzen 5 5600X paired with the NVIDIA GeForce RTX 2060 delivers a playable experience in Pc Building Simulator, but the performance envelope is heavily dependent on resolution and preset selection. Measured data shows this combination achieves a 98 FPS average at 1080p Ultra, dropping to 32 FPS at 4K Ultra — a clear indication that the GPU becomes the primary bottleneck as resolution scales upward. The RTX 2060, with its 6 GB GDDR6 memory and 336.0 GB/s bandwidth, handles the simulation's rendering demands adequately at lower resolutions, while the Ryzen 5 5600X’s 6-core, 12-thread configuration provides sufficient processing headroom for the game’s simulation logic.

Resolution Scaling

The FPS progression from 1080p to 4K reveals a predictable but steep performance curve. At 1080p Low, the combo produces 205 FPS average, which drops to 129 FPS at 1440p Low and further to 68 FPS at 4K Low. This represents a 66.8% reduction from 1080p to 4K at Low settings, indicating that the GPU is the primary limiting component even at the lowest graphical preset. The scaling pattern becomes more pronounced at higher settings: at High, the drop from 1080p (102 FPS) to 1440p (65 FPS) is a 36.3% decrease, and then to 4K (34 FPS) another 47.7% decrease from 1440p.

The Medium preset offers the most complete data, with min and max FPS recorded at each resolution. At 1080p Medium, the average is 145 FPS with a range of 123 to 167 FPS. Moving to 1440p Medium yields 92 FPS average (78 to 105 FPS range), and 4K Medium drops to 48 FPS average (41 to 55 FPS range). The consistent 36-48% performance hit between each resolution step at Medium settings confirms that the RTX 2060's rendering throughput — not the CPU — is dictating frame rates. The Ryzen 5 5600X, with its 4.60 GHz boost clock and 32 MB L3 cache, has ample single-thread performance to feed the GPU in this simulation title.

At Ultra settings, the combo achieves 98 FPS at 1080p, 62 FPS at 1440p, and 32 FPS at 4K. The 4K Ultra result falls below the 34 FPS High preset at the same resolution, suggesting that Ultra settings introduce additional GPU load that the RTX 2060 struggles to sustain at 4K. The 1080p to 1440p drop at Ultra (36.7%) is nearly identical to the High preset drop (36.3%), but the 1440p to 4K Ultra drop (48.4%) is slightly larger than High's 47.7%, pointing to diminishing returns as pixel count increases.

How This Combo Ranks

In the benchmark database, this specific CPU-GPU combination ranks 2936 out of 3723 tested combos for Pc Building Simulator. This places it in the bottom 21.1% of all configurations, which may seem counterintuitive given the playable frame rates at 1080p. The ranking reflects the entire spectrum of tested hardware, including far more powerful GPUs and newer CPUs. However, the percentile position indicates that most tested combos deliver higher average FPS in this title, likely because Pc Building Simulator is not exceptionally demanding and even mid-range modern hardware can exceed the RTX 2060's performance.

The CPU itself sits at the 75th percentile versus all CPUs, with an average benchmark score of 21771. Its nearest rivals include the AMD Ryzen 7 4800H (21749, 0.1% slower), AMD Ryzen 5 PRO 6650U (21874, 0.5% faster), Intel Core i7-11700 (21891, 0.5% faster), and AMD EPYC 9554P (21899, 0.6% faster). This tight clustering shows the 5600X is competitive with a range of mobile and desktop parts in general compute, but its gaming performance is more dependent on the GPU pairing. The GPU, meanwhile, ranks at the 58th percentile versus all GPUs with an average benchmark score of 15290, placing it near the RTX 3050 OEM (15199, 0.6% slower) and Radeon RX 7600 (15171, 0.8% slower) in overall GPU benchmarks.

CPU Role

The AMD Ryzen 5 5600X is built on the Zen 3 architecture (Vermeer codename) using TSMC's 7 nm process. It features 6 cores and 12 threads with a base clock of 3.70 GHz and boost clock of 4.60 GHz. The 65 W TDP and unlocked multiplier make it a flexible desktop part, but in Pc Building Simulator, the CPU's role is secondary to the GPU. The game's simulation mechanics — managing PC components, running benchmarks, and assembling systems — are not heavily threaded, so the 5600X's strong single-core performance (3dmark_single_thread score of 917, Cinebench R23 single-core score of 1541) provides more than enough headroom.

The measured FPS data supports this analysis. At 1080p Low, the combo produces 205 FPS, which is far beyond what a CPU-limited scenario would show. Even at 1080p Ultra with 98 FPS, the frame rate is high enough that CPU core utilization is unlikely to be a constraint. The 5600X's 3dmark_2_threads score of 1793 and 4_threads score of 3363 indicate strong performance in lightly-threaded workloads, which aligns with the game's requirements. The L3 cache of 32 MB helps reduce memory latency for the simulation's data processing, though the dual-channel DDR4-3200 memory bandwidth of 51.2 GB/s is standard for the platform.

The CPU's nearest rivals in benchmark scores — the Ryzen 7 4800H, Ryzen 5 PRO 6650U, Core i7-11700, and EPYC 9554P — all fall within 0.6% of the 5600X's average score, meaning any of these would perform nearly identically in this game. The lack of meaningful CPU differentiation in the benchmark results reinforces that Pc Building Simulator is GPU-bound at the tested resolutions and settings.

Measured FPS Breakdown

The complete FPS dataset for this combo covers four resolutions and four quality presets, though min and max FPS are only recorded for Medium settings.

At 1920x1080, the Low preset delivers 205 FPS average, which is the highest recorded result. Medium drops to 145 FPS average (123 min, 167 max), High to 102 FPS, and Ultra to 98 FPS. The gap between Low and Medium is 60 FPS (29.3% reduction), while the gap between Medium and High is 43 FPS (29.7% reduction). Interestingly, the step from High to Ultra is only 4 FPS (3.9% reduction), suggesting that Ultra adds minimal additional GPU load at 1080p compared to High.

At 2560x1440, Low produces 129 FPS average, Medium 92 FPS (78 min, 105 max), High 65 FPS, and Ultra 62 FPS. The Low-to-Medium drop is 37 FPS (28.7%), Medium-to-High is 27 FPS (29.3%), and High-to-Ultra is only 3 FPS (4.6%). The consistent ~29% reduction between Low/Medium and Medium/High at both 1080p and 1440p suggests these presets scale linearly with rendering load, while Ultra has a nearly negligible additional cost over High.

At 3840x2160, Low yields 68 FPS average, Medium 48 FPS (41 min, 55 max), High 34 FPS, and Ultra 32 FPS. The 4K Low result is the only 4K preset above 60 FPS, and it drops below the 60 FPS threshold that many gamers consider the minimum for smooth gameplay. The Medium preset's min FPS of 41 indicates noticeable frame dips during complex scenes, while High and Ultra at 4K are borderline unplayable for most users.

The Medium settings provide the only min/max data, which shows variance of 44 FPS at 1080p (123-167), 27 FPS at 1440p (78-105), and 14 FPS at 4K (41-55). The decreasing variance at higher resolutions reflects the GPU being more consistently maxed out, leaving less headroom for frame spikes.

FAQ

Q: Can this combo run Pc Building Simulator at 4K?

A: Yes, but only at Low settings where it achieves 68 FPS average. Medium settings drop to 48 FPS average with a 41 FPS minimum, while High and Ultra produce 34 FPS and 32 FPS respectively, which are below smooth gameplay thresholds.

Q: What is the best resolution for this hardware?

A: 1080p is the sweet spot, with all presets delivering 98 FPS or higher. The Low preset reaches 205 FPS, Medium 145 FPS, High 102 FPS, and Ultra 98 FPS, all comfortably above 60 FPS.

Q: How does the RTX 2060 compare to its nearest GPU rivals in overall benchmarks?

A: The RTX 2060 has an average benchmark score of 15290. It is essentially tied with the GTX 580 (15283, 0% difference), slightly ahead of the Radeon 680M (15270, 0.1% slower), and about 0.6-0.8% behind the RTX 3050 OEM (15199) and Radeon RX 7600 (15171).

Q: Is the Ryzen 5 5600X a bottleneck in this game?

A: No. The CPU's 6 cores and 12 threads with a 4.60 GHz boost clock provide ample performance. The FPS scaling from 1080p to 4K closely tracks GPU load, and even at 1080p Low (205 FPS), there is no indication of CPU limitation.

Q: What is the difference between High and Ultra presets?

A: At 1080p, Ultra is only 4 FPS slower than High (98 vs 102 FPS). At 1440p, the difference is 3 FPS (62 vs 65 FPS), and at 4K, it is 2 FPS (32 vs 34 FPS). Ultra appears to add minimal rendering cost over High in this game.

Q: How much FPS do you lose going from 1080p to 1440p at Medium settings?

A: At Medium, 1080p averages 145 FPS while 1440p averages 92 FPS, a reduction of 53 FPS or approximately 36.6%. The min FPS also drops from 123 to 78, a 36.6% reduction.

Settings Recommendations

For this CPU-GPU combination, the data suggests that 1080p Medium or High provides the best balance of visual quality and performance. Medium delivers 145 FPS average with a 123 FPS minimum, ensuring smooth gameplay even in demanding scenes. High offers 102 FPS average, which is still well above 60 FPS, and the visual upgrade over Medium is likely noticeable. Ultra at 1080p (98 FPS) provides only a marginal improvement over High (102 FPS) — a 4 FPS difference — so it is not worth the extra GPU load unless the player prioritizes maximum visual fidelity.

At 1440p, Medium (92 FPS average, 78 FPS minimum) is the recommended choice for maintaining high frame rates. High (65 FPS) is playable but leaves less headroom for frame dips, while Ultra (62 FPS) offers no meaningful advantage over High. Low at 1440p (129 FPS) is an option for competitive play or high-refresh-rate displays, but the visual compromise is significant.

At 4K, only Low (68 FPS) provides a playable experience. Medium (48 FPS) falls below the 60 FPS threshold, and High (34 FPS) and Ultra (32 FPS) are not recommended for smooth gameplay. Players with 4K displays should either accept Low settings or consider lowering the resolution to 1440p for a better experience.

GPU Role

The NVIDIA GeForce RTX 2060 is built on the Turing architecture (TU106 chip) using TSMC's 12 nm process. It features 1920 shading units, 120 texture mapping units, and 48 ROPs, with 30 RT cores and 240 tensor cores for ray tracing and AI workloads. The 6 GB GDDR6 memory on a 192-bit bus provides 336.0 GB/s bandwidth, which is sufficient for Pc Building Simulator's texture and geometry requirements but becomes a limiting factor at 4K resolutions. The base clock of 1365 MHz boosts to 1680 MHz, delivering 6.451 TFLOPS of FP32 performance.

The GPU's average benchmark score of 15290 places it at the 58th percentile, with its nearest rivals including the GTX 580 (15283), Radeon 680M (15270), RTX 3050 OEM (15199), and Radeon RX 7600 (15171). These results show the RTX 2060 is competitive with a range of older and newer GPUs, but none of these rivals would dramatically change the Pc Building Simulator experience given how the game scales with resolution.

The measured FPS data clearly shows the RTX 2060 as the performance ceiling. At 4K Ultra, the GPU produces only 32 FPS, and even at 4K Low it manages just 68 FPS. The 6 GB VRAM capacity is likely a factor at 4K with higher presets, as texture memory requirements exceed what the card can efficiently store. The 160 W TDP and dual-slot design are modest for a performance GPU, and the 450 W suggested PSU leaves adequate headroom for the rest of a system. The GPU's DirectX 12 Ultimate support ensures compatibility with modern rendering features, though Pc Building Simulator's simulation-focused gameplay does not heavily utilize the RT cores or tensor cores.