Pc Building Simulator

# Pc Building Simulator — AMD Ryzen 5 5600X + AMD Radeon RX 9060

The AMD Ryzen 5 5600X paired with the AMD Radeon RX 9060 delivers a playable experience across most settings in Pc Building Simulator, but the data reveals a system that is heavily GPU-limited at higher resolutions while showing surprising CPU headroom at 1080p. The measured frame rates span from 39 FPS at 4K Ultra to 247 FPS at 1080p Low, indicating that the combination's performance ceiling is dictated almost entirely by the graphics card once resolution climbs past 1440p. The RX 9060's 59th percentile ranking among all GPUs, combined with the Ryzen 5 5600X's 75th percentile CPU standing, creates a pairing where the GPU becomes the bottleneck in every measured scenario except the lowest-resolution, lowest-settings case.

Resolution Scaling

The frame rate drop from 1080p to 4K follows a steep curve that points squarely at the GPU as the limiting component. At High settings, the average FPS falls from 124 at 1920x1080 to 78 at 2560x1440, then to 41 at 3840x2160. That represents a 37% reduction from 1080p to 1440p, and a further 47% drop from 1440p to 4K. The scaling is consistent with a GPU that has 8 GB of GDDR6 memory on a 128-bit bus with 288.0 GB/s bandwidth — adequate for 1080p and 1440p, but increasingly strained as pixel count quadruples from 1080p to 4K.

At Low settings, the resolution scaling is even more telling. The RX 9060 produces 247 FPS at 1080p, 156 FPS at 1440p, and 82 FPS at 4K. The 1080p-to-1440p drop is 37%, while the 1440p-to-4K drop is 47% — nearly identical percentages to the High settings scenario. This consistency across settings indicates that the GPU's raw throughput, not texture memory or shading complexity, is the primary constraint. If the CPU were the bottleneck, the scaling percentages would diverge between Low and High settings, since Low settings reduce GPU load and would expose any processor limitation.

The Medium settings data provides the only min/max frame time information in the entire measured set. At 1080p Medium, the average is 175 FPS with a minimum of 149 and maximum of 201. At 1440p Medium, the average is 111 FPS with min/max of 94/127. At 4K Medium, the average is 58 FPS with min/max of 49/66. The frame time spread widens slightly at higher resolutions — from a 52 FPS range at 1080p to a 33 FPS range at 1440p and a 17 FPS range at 4K — suggesting that the GPU is not experiencing memory bandwidth starvation but rather consistent throughput degradation as resolution increases.

Ultra settings show the most dramatic resolution sensitivity. The RX 9060 manages 118 FPS at 1080p Ultra, dropping to 74 FPS at 1440p Ultra, and falling to 39 FPS at 4K Ultra. The 4K Ultra result is the only measured average below 40 FPS, making it the sole configuration where the combination fails to maintain a comfortable playability threshold. The 67% reduction from 1080p Ultra to 4K Ultra is the largest percentage drop across any settings tier, indicating that the Ultra preset's additional effects place an outsized burden on the GPU's 1792 shading units and 64 ROPs at high pixel counts.

How This Combo Ranks

The combination of the AMD Ryzen 5 5600X and AMD Radeon RX 9060 ranks 1710 out of 3002 tested combos in Pc Building Simulator, placing it in the lower-middle portion of the database. This ranking reflects the GPU's modest standing — the RX 9060 sits at the 59th percentile among all GPUs — rather than the CPU's stronger position at the 75th percentile among all CPUs. The combo's rank suggests that while the processor is capable of feeding the graphics card adequately, the GPU itself does not deliver class-leading performance in this simulation title.

The GPU's nearest rivals put its performance into context. The RX 9060's average benchmark score of 16014 is 0.7% below the NVIDIA GeForce RTX 3060 Ti's 16129, and 1% above the AMD Radeon RX 7700's 15852 and the AMD Radeon R9 370X's 15862. This places the RX 9060 in a tight cluster where a few percentage points separate it from direct competitors. In Pc Building Simulator specifically, the combo's 1710th rank out of 3002 means roughly 57% of tested combinations deliver higher frame rates, which is consistent with a GPU that sits just below the midpoint of the performance distribution.

The CPU's nearest rivals tell a similar story of tight competition. The Ryzen 5 5600X's average benchmark score of 21771 is 0.1% above the AMD Ryzen 7 4800H's 21749, 0.5% below the AMD Ryzen 5 PRO 6650U's 21874, and 0.5% below the Intel Core i7-11700's 21891. These sub-1% deltas indicate that the 5600X is squarely in the middle of a dense pack of processors with nearly identical average scores. The EPYC 9554P, despite being a server-class chip, also lands within 0.6% of the 5600X's average score, underscoring that the CPU's benchmark performance is not what distinguishes this combo in the rankings.

GPU Role

The AMD Radeon RX 9060 is built on the Navi 44 chip using RDNA 4.0 architecture, manufactured on TSMC's 4 nm process with 29,700 million transistors on a 199 mm² die. The GPU has 1792 shading units, 112 texture mapping units, and 64 ROPs, with 28 ray tracing cores. Its clock speeds are substantial: a base clock of 1700 MHz, a game clock of 2400 MHz, and a boost clock of 2990 MHz. The memory subsystem consists of 8 GB of GDDR6 on a 128-bit bus, running at 2250 MHz with 18 Gbps effective speed, yielding 288.0 GB/s of bandwidth.

In Pc Building Simulator, the GPU's performance characteristics align with its benchmark profile. The 3DMark Steel Nomad DX12 score of 3322 and the PassMark G3D score of 17631 both reflect a mid-range GPU, and the measured in-game FPS follows suit. The 8 GB VRAM capacity is not directly stressed by the measured results — there is no texture-related stuttering indicated in the min FPS data — but the 128-bit memory bus and 288.0 GB/s bandwidth likely contribute to the steep resolution scaling observed. The GPU's pixel rate of 191.4 GPixel/s and texture rate of 334.9 GTexel/s provide theoretical ceilings that the measured frame rates approach at 4K but do not exceed.

The RX 9060's FP32 performance of 21.43 TFLOPS and FP16 performance of 21.43 TFLOPS (1:1 ratio) indicate balanced compute capabilities. The GPU's 59th percentile ranking among all GPUs, with an average benchmark score of 16014, places it within 0.7% of the RTX 3060 Ti — a notable comparison point. The PassMark DirectX scores show variance across API versions: 280 for DX9, 182 for DX11, 104 for DX10, and 44 for DX12. These scores suggest that the GPU's performance in older DirectX titles may not translate directly to Pc Building Simulator, which likely uses a modern rendering path given the game's 2019 release date and the measured results.

Measured FPS Breakdown

At 1920x1080, the combination delivers consistently high frame rates across all settings. Low settings produce an average of 247 FPS, Medium settings yield 175 FPS with a minimum of 149 and maximum of 201, High settings reach 124 FPS, and Ultra settings drop to 118 FPS. The gap between High and Ultra at 1080p is minimal — only 6 FPS — suggesting that the Ultra preset's additional effects are relatively lightweight at this resolution, or that the CPU is beginning to limit the GPU's output at these high frame rates.

At 2560x1440, the frame rates remain strong but show clearer GPU scaling. Low settings average 156 FPS, Medium settings average 111 FPS with min/max of 94/127, High settings average 78 FPS, and Ultra settings average 74 FPS. The High-to-Ultra gap narrows to just 4 FPS at 1440p, which is an even smaller differential than at 1080p. This pattern — where High and Ultra produce nearly identical results — indicates that the Ultra preset's marginal quality improvements come at a negligible performance cost in this game, making it an attractive option for users with 1440p displays.

At 3840x2160, the GPU's limitations become apparent. Low settings average 82 FPS, Medium settings average 58 FPS with min/max of 49/66, High settings average 41 FPS, and Ultra settings average 39 FPS. The 4K Ultra result of 39 FPS is the only measured configuration below 40 FPS, and the High-to-Ultra gap at 4K shrinks to just 2 FPS. The progression from Low to Ultra at 4K — 82, 58, 41, 39 — shows that the GPU has limited headroom to absorb increased settings complexity at this resolution. The Medium settings data at 4K, with a 49 FPS minimum, suggests that frame times remain consistent enough to avoid severe stuttering, but the overall experience at High and Ultra will likely feel sluggish.

CPU Role

The AMD Ryzen 5 5600X provides 6 cores and 12 threads based on the Zen 3 architecture (Vermeer codename), manufactured on TSMC's 7 nm process with 4,150 million transistors on a 74 mm² die. It operates with a base clock of 3.70 GHz and a boost clock of 4.60 GHz, with a 65 W TDP. The cache hierarchy includes 64 KB of L1 per core, 512 KB of L2 per core, and 32 MB of shared L3 cache. Memory support is DDR4 with dual-channel configuration, providing 51.2 GB/s of bandwidth.

In Pc Building Simulator, the CPU's influence is most evident at 1080p Low settings, where the GPU produces 247 FPS. At this frame rate, the 5600X's 12 threads are likely keeping pace with the GPU's output, but the 75th percentile CPU ranking suggests it has headroom for even higher frame rates if the GPU could deliver them. The CPU's Cinebench R23 multicore score of 11838 and single-core score of 1541 indicate strong per-thread performance, which is critical for simulation games that often rely on a few heavily loaded threads. The 3DMark scores — 917 single-thread, 1793 for 2 threads, 3363 for 4 threads, 4811 for 8 threads, and 5588 for max threads — show near-linear scaling up to 8 threads, which bodes well for games that can utilize multiple cores.

The CPU's average benchmark score of 21771 places it at the 75th percentile, but its nearest rivals all cluster within 0.6% of this score. The Ryzen 7 4800H, a mobile chip, is 0.1% behind, while the Ryzen 5 PRO 6650U and Core i7-11700 are both 0.5% ahead. This tight grouping means that in Pc Building Simulator, the CPU selection is unlikely to be the differentiating factor between systems — the GPU's 59th percentile ranking is what drives the combo's overall 1710th position. The CPU's PassMark scores, including 21858 for multithread and 3364 for single-thread, confirm that the 5600X is a capable mid-range processor that does not bottleneck the RX 9060 in this title.

FAQ

Q: What frame rate can this combo achieve at 1080p with Ultra settings?

A: The AMD Ryzen 5 5600X paired with the AMD Radeon RX 9060 averages 118 FPS at 1920x1080 with Ultra settings, which is only 6 FPS below the High settings result of 124 FPS.

Q: Is this combination capable of 4K gaming in Pc Building Simulator?

A: The combo produces an average of 41 FPS at 3840x2160 with High settings and 39 FPS with Ultra settings. Low settings reach 82 FPS and Medium settings average 58 FPS, so 4K is playable only at lower presets.

Q: How does the RX 9060 compare to its nearest GPU rival?

A: The RX 9060's average benchmark score of 16014 is 0.7% below the NVIDIA GeForce RTX 3060 Ti's 16129, making the two GPUs nearly equivalent in raw performance.

Q: What is the CPU's performance percentile and how does it affect gameplay?

A: The Ryzen 5 5600X ranks at the 75th percentile among all CPUs with an average benchmark score of 21771. In Pc Building Simulator, it does not appear to bottleneck the GPU, as frame rates scale consistently with resolution changes.

Q: At which resolution does the GPU become the clear limiting factor?

A: The data shows the GPU becomes the dominant constraint at 2560x1440 and above. At 1080p, the frame rate differences between High and Ultra are small (6 FPS), but at 1440p and 4K, the GPU's throughput limits performance more severely.

Q: What are the minimum frame rates for Medium settings at different resolutions?

A: At 1080p Medium, the minimum FPS is 149 with an average of 175. At 1440p Medium, the minimum is 94 with an average of 111. At 4K Medium, the minimum is 49 with an average of 58.

Settings Recommendations

Based on the measured data, the optimal settings for this combination depend heavily on the target resolution. At 1920x1080, the Ultra preset is the clear choice — the 118 FPS average is only 6 FPS below High settings, and the extra visual quality comes at minimal cost. The 1080p Medium setting, with its 175 FPS average and 149 FPS minimum, is overkill for most displays that refresh at 144 Hz or lower, making Ultra the best experience for users prioritizing visual fidelity over raw frame rates.

At 2560x1440, the recommendation shifts toward High or Ultra. The High preset averages 78 FPS, while Ultra averages 74 FPS — a difference of only 4 FPS that makes Ultra the better value for 1440p users. The Medium preset at 111 FPS is available for those who prefer higher refresh rates, but the min FPS of 94 still provides a smooth experience. Given that Ultra and High are nearly identical in performance at this resolution, choosing Ultra maximizes visual quality without meaningful downside.

At 3840x2160, the limitations of the RX 9060 become decisive. The High preset's 41 FPS and Ultra's 39 FPS are both below the generally accepted smoothness threshold, making Medium the recommended choice at 4K. The Medium preset's 58 FPS average with a 49 FPS minimum provides a playable experience, while Low settings at 82 FPS are available for users who prioritize frame rate above all else. The 4K Medium configuration represents the best balance of visual fidelity and performance for this combination, as the jump from Medium to High costs 17 FPS while the visual improvement in a simulation game may be less noticeable than in fast-paced genres.