Barony

The AMD Ryzen 5 5600X paired with the NVIDIA GeForce RTX 2060 delivers a performance profile in Barony that is heavily dictated by resolution and graphics settings, with the data revealing a clear transition from a CPU-bound scenario at 1080p to a GPU-bound one at 4K. The measured frame rates across the twelve tested configurations show that while the combination is capable of high refresh rates at lower resolutions, the demands of 4K Ultra quickly overwhelm the GPU, offering a stark contrast in playability.

Resolution Scaling

The frame rate drop from 1080p to 4K is dramatic and non-linear, indicating where the bottleneck shifts. At Low settings, the average FPS falls from 259.9 at 1920x1080 to 83.6 at 3840x2160, representing a reduction to roughly 32% of the original performance. This steep decline is a classic indicator that the GPU is becoming the limiting factor as pixel count quadruples. The RTX 2060’s 6 GB of GDDR6 memory and 192-bit bus are being taxed heavily, as the fill-rate and shading demands outpace what the Turing architecture can deliver at 4K.

Moving from 1440p to 4K shows an even more pronounced scaling penalty. At High settings, the average FPS drops from 107.1 at 2560x1440 to 55.1 at 3840x2160, which is a 48.5% performance loss. This suggests that while the CPU can still feed frames at 1440p, the GPU’s compute resources—specifically its 1920 shading units and 48 ROPs—are saturated when rendering at 4K. The result is that the combination is only viable for 4K gaming at Low or Medium presets, where frame rates remain above the 60 FPS threshold.

The data implies that 1080p is the sweet spot for this pairing, with even Ultra settings producing 121.9 FPS. The scaling from 1080p to 1440p at Ultra shows a 38.5% drop to 75 FPS, which is still playable, but the further drop to 36.7 FPS at 4K Ultra makes that configuration unsuitable for smooth gameplay. The resolution scaling pattern underscores that the RTX 2060 is a 1080p-class card, with 1440p being a compromise and 4K reserved for lower fidelity settings.

GPU Role

The NVIDIA GeForce RTX 2060’s specifications directly explain its performance ceiling in Barony. With a boost clock of 1680 MHz, the card can push frames efficiently at lower resolutions, but its 6 GB VRAM capacity is a potential constraint at higher settings. The Ultra preset at 4K yields only 36.7 FPS, which is below the playable threshold, indicating that the GPU’s memory bandwidth of 336.0 GB/s is insufficient for the texture and geometry demands at that resolution.

The GPU’s FP32 performance of 6.451 TFLOPS and texture rate of 201.6 GTexel/s are moderate by modern standards, and the benchmark results reflect this. The card’s percentile rank of 58 among all GPUs places it in the lower half of the performance spectrum, and its nearest rival, the AMD Radeon RX 7600S, scores 0.5% higher on average, showing just how close the competition is in this range. The RTX 2060’s 30 RT cores and 240 tensor cores do not appear to provide any specific advantage in Barony, as the game’s roguelike genre likely relies on traditional rasterization.

The data shows that the GPU’s role becomes dominant at 4K, where the Low preset produces 83.6 FPS compared to 36.7 FPS at Ultra. This 56% performance gap between settings at the same resolution highlights the GPU’s sensitivity to shader complexity and texture filtering. The card’s 12 nm process node, while older, still delivers consistent results, but the 160 W TDP and dual-slot design suggest it is a power-hungry solution for its performance class.

CPU Role

The AMD Ryzen 5 5600X, with its 6 cores and 12 threads, proves to be a capable partner for the RTX 2060, particularly at lower resolutions where the GPU is not the bottleneck. The CPU’s boost clock of 4.60 GHz and 32 MB of L3 cache provide strong single-threaded performance, which is crucial for roguelike games that often rely on game logic and AI calculations. The Cinebench R23 multi-core score of 18578 and single-core score of 2622 indicate a processor that can handle both multi-threaded workloads and latency-sensitive tasks.

At 1080p Low, the combination achieves 259.9 FPS, which is likely CPU-limited, as the GPU has headroom to render more frames but the CPU cannot issue draw calls fast enough. The CPU’s 3DMark single-thread score of 917 and 2-thread score of 1793 reinforce its strong per-core performance, which is essential for maintaining high frame rates in less demanding scenes. The processor’s 65 W TDP and 7 nm process node make it efficient, but the data suggests that its performance is sufficient to feed the RTX 2060 up to 1440p.

The CPU’s percentile rank of 78 against all CPUs places it well above the GPU’s rank of 58, indicating that the processor is the stronger component in this pairing. Its nearest rival, the Intel Core i5-12490F, scores 0.5% higher on average, while the AMD Ryzen 5 5600GT scores 0.3% lower. This proximity in performance means that the CPU is not the primary constraint in most scenarios, except at very high frame rates where its 12 threads can become a limiting factor.

How This Combo Ranks

The combination of the Ryzen 5 5600X and RTX 2060 ranks at position 1400 out of 1702 tested combos in Barony, placing it in the lower 18% of all possible pairings. This rank is surprisingly low given the individual component performance, suggesting that the GPU is holding the combo back significantly. The data reveals that while the CPU is in the 78th percentile, the GPU is only in the 58th percentile, creating a mismatch that limits overall gaming performance.

The combo’s rank implies that many other pairings, likely those with more powerful GPUs, achieve higher frame rates in Barony. The RTX 2060’s average benchmark score of 16074 is well below the CPU’s average of 20680, and this disparity is reflected in the gaming results. The combo’s performance is particularly weak at 4K Ultra, where the 36.7 FPS result would place it among the slower configurations in the database.

The rank also suggests that users with this combo would benefit from upgrading the GPU rather than the CPU, as the processor has more headroom. The CPU’s nearest rivals all score within 0.7% of each other, indicating that the processor is not the differentiating factor. Instead, the GPU’s position relative to its rivals—where the AMD Radeon Pro 5700 scores 1.7% higher—shows that the graphics card is the weak link in this setup.

Settings Recommendations

Based on the measured FPS data, the optimal settings for this combo depend heavily on the target resolution. At 1920x1080, all presets are playable, with Low achieving 259.9 FPS, Medium at 195.8 FPS, High at 166.2 FPS, and Ultra at 121.9 FPS. For competitive play or high refresh rate monitors, Low or Medium settings are recommended, as they provide frame rates well above 144 FPS. For a balanced visual experience, High settings at 1080p offer a strong compromise, delivering 166.2 FPS while maintaining better image quality.

At 2560x1440, the choice becomes more critical. Low settings produce 165.7 FPS, which is excellent for fast-paced gameplay, while Medium drops to 125.5 FPS, still sufficient for most displays. High settings at 107.1 FPS are playable, but Ultra falls to 75 FPS, which may feel less responsive. For 1440p users, Medium is the recommended preset, as it offers a significant visual upgrade over Low while keeping frame rates above 120 FPS.

At 3840x2160, only Low and Medium are viable. Low yields 83.6 FPS, which is smooth, while Medium drops to 64.3 FPS, still playable but with a noticeable reduction in fluidity. High at 55.1 FPS is borderline, and Ultra at 36.7 FPS is not recommended for any serious gaming. The data suggests that 4K users should stick to Low settings to maintain a consistent experience, as the jump to Medium costs a 23% performance penalty.

FAQ

Q: What is the best resolution for this combo in Barony?

A: The data shows that 1920x1080 is the best resolution, with all settings producing frame rates above 120 FPS. At 1440p, only Low and Medium presets stay above 120 FPS, while 4K is limited to Low for smooth performance.

Q: How does the RTX 2060 compare to its nearest rival in performance?

A: The RTX 2060’s average benchmark score is 16074, while the AMD Radeon RX 7600S scores 15996, which is 0.5% lower. The AMD Radeon Pro 5700 scores 16351, which is 1.7% higher than the RTX 2060.

Q: Is the Ryzen 5 5600X the bottleneck in this pairing?

A: At 1080p Low, the combo achieves 259.9 FPS, which suggests the CPU is the limiting factor. However, at 4K Ultra, the GPU is clearly the bottleneck, as the frame rate drops to 36.7 FPS, indicating the CPU has more headroom than the GPU.

Q: What is the frame rate difference between Low and Ultra at 1440p?

A: At 2560x1440, Low settings produce 165.7 FPS, while Ultra produces 75 FPS. This represents a 54.7% performance drop when increasing settings from Low to Ultra.

Q: Can this combo handle 4K gaming in Barony?

A: Yes, but only at lower settings. At 4K Low, the average FPS is 83.6, which is playable. Medium is 64.3 FPS, High is 55.1 FPS, and Ultra is 36.7 FPS, with only Low and Medium being recommended for smooth gameplay.

Q: How does this combo rank against all other tested combinations?

A: The combo ranks at position 1400 out of 1702 tested combos, placing it in the bottom 18% of all pairings. This low rank is primarily due to the GPU’s performance limitations.

Measured FPS Breakdown

At 1920x1080, the combo delivers its highest frame rates across all settings. Low settings achieve 259.9 FPS, Medium reaches 195.8 FPS, High hits 166.2 FPS, and Ultra produces 121.9 FPS. These results show that the combo is well-suited for 1080p gaming, with all presets exceeding the 120 FPS threshold for smooth gameplay.

At 2560x1440, performance drops but remains respectable. Low settings yield 165.7 FPS, Medium produces 125.5 FPS, High achieves 107.1 FPS, and Ultra drops to 75 FPS. The data indicates that Medium is the highest setting that maintains frame rates above 120 FPS, while High and Ultra are still playable but with diminishing returns.

At 3840x2160, the GPU becomes the primary constraint. Low settings produce 83.6 FPS, Medium drops to 64.3 FPS, High falls to 55.1 FPS, and Ultra bottoms out at 36.7 FPS. The scaling from Low to Ultra at 4K represents a 56% performance loss, highlighting the RTX 2060’s limitations at this resolution. The measured data shows a clear hierarchy: 1080p is excellent, 1440p is good with caveats, and 4K is only viable at the lowest presets.