Pc Building Simulator

Resolution Scaling

The measured FPS data for Pc Building Simulator with the AMD Ryzen 5 5600GT and NVIDIA GeForce RTX 5090 D reveals a clear pattern of performance degradation as resolution increases. At 1920x1080 with High settings, the combo produces 260 FPS. Moving to 2560x1440 at the same settings drops that to 179 FPS, a reduction of approximately 31%. Stepping up to 3840x2160 High yields 94 FPS, which is about 47% lower than the 1440p result and 64% below the 1080p figure.

The scaling behavior differs across settings presets. At Low settings, the drop from 1080p (337 FPS) to 1440p (289 FPS) is roughly 14%, while the jump from 1440p to 4K (187 FPS) represents a 35% decline. Medium settings show a similar pattern: 296 FPS at 1080p, 254 FPS at 1440p, and 133 FPS at 4K. The Ultra preset follows the same trajectory with 256 FPS, 171 FPS, and 89 FPS respectively.

These numbers indicate that the RTX 5090 D remains the dominant factor across all resolutions, but the CPU begins to exert more influence at lower resolutions. At 1080p, the frame rates are extraordinarily high — 337 FPS on Low — which suggests the Ryzen 5 5600GT can keep pace with the GPU in this simulation title. The relatively modest single-thread performance of the CPU, reflected in its 3dmark_single_thread score of 913 and Cinebench R23 single-core result of 2438, appears sufficient for this game's demands.

The 4K results tell a different story. At Ultra settings, the combo manages 89 FPS, and at High it reaches 94 FPS. These are playable numbers, but they show that the GPU is being pushed harder at this resolution. The RTX 5090 D's 32 GB of GDDR7 memory and 1.79 TB/s bandwidth provide ample headroom for 4K textures, yet the rendering load still brings frame rates down significantly from the 1080p figures.

What is notable is the gap between Low and Ultra at each resolution. At 1080p, the spread is 81 FPS (337 vs 256). At 1440p, it is 118 FPS (289 vs 171). At 4K, it is 98 FPS (187 vs 89). The widest spread at 1440p suggests that resolution interacts with settings in a non-linear way for this hardware combination, likely due to the CPU becoming a limiting factor at lower settings where the GPU has less work to do.

GPU Role

The NVIDIA GeForce RTX 5090 D is a Blackwell 2.0 architecture part built on a 5 nm process at TSMC, featuring 92,200 million transistors on a 750 mm² die. Its base clock is 2017 MHz with a boost of 2407 MHz, and memory runs at 1750 MHz with 28 Gbps effective speed. The GPU packs 21,760 shading units, 680 TMUs, and 176 ROPs, along with 170 RT cores and 680 tensor cores. This hardware configuration produces a passmark_g3d score of 44065 and a 3dmark_steel_nomad_dx12 score of 14326.

In Pc Building Simulator, the GPU's role is substantial but not overwhelming. The 32 GB GDDR7 memory on a 512-bit bus with 1.79 TB/s bandwidth ensures that texture streaming and memory bandwidth are never bottlenecks, even at 4K Ultra. The measured data supports this: at 4K Ultra, the combo still achieves 89 FPS, which is well within playable range. The GPU's percentile ranking of 92 among all GPUs, with an average benchmark score of 77712, places it in the upper tier of graphics cards.

Comparing the RTX 5090 D to its nearest rivals in the benchmark database shows interesting dynamics. The AMD Radeon RX 6650M XT scores 76904, which is 1.1% lower than the RTX 5090 D's average. The AMD Radeon RX 6850M XT scores 78940, putting it 1.6% higher. The NVIDIA Tesla P100 PCIe 12 GB and 16 GB variants score 79396 and 79605, respectively, which are 2.1% and 2.4% higher. This places the RTX 5090 D in a tight cluster of GPUs with similar average benchmark scores, despite the massive differences in memory capacity and architecture.

The GPU's clock behavior in this game appears stable. With a boost clock of 2407 MHz, the card can sustain high frame rates across all settings. The pixel rate of 423.6 GPixel/s and texture rate of 1,636.8 GTexel/s provide the raw throughput needed for the simulation's rendering tasks. The FP32 performance of 104.8 TFLOPS (with FP16 at 1:1 ratio) means compute-heavy effects, if present in the game, would be handled efficiently.

Settings Recommendations

Based on the measured FPS rows, the Medium preset offers the best balance between visual quality and performance for most users. At 1920x1080 Medium, the combo delivers 296 FPS with a minimum of 252 FPS and maximum of 341 FPS. This provides a smooth experience with room to spare for any frame-time spikes. At 2560x1440 Medium, the average drops to 254 FPS with a minimum of 216 FPS and maximum of 292 FPS, still comfortably above any refresh rate commonly available.

For 4K gaming, the choice is more nuanced. Medium at 3840x2160 produces 133 FPS with a minimum of 113 FPS and maximum of 153 FPS. This is the only 4K preset with recorded minimum and maximum values, suggesting it maintains a consistent frame rate. The High preset at 4K achieves 94 FPS, while Ultra drops to 89 FPS. Given the small difference between High and Ultra at 4K (5 FPS), and the larger gap between Medium and High (39 FPS), Medium appears to be the sweet spot for 4K.

At lower resolutions, the differences between presets become less critical. At 1080p, even the Ultra preset delivers 256 FPS, which exceeds the refresh rate of virtually all monitors. The Low preset at 337 FPS offers marginal gains over Medium (296 FPS) and High (260 FPS), but the visual trade-off in a simulation game like Pc Building Simulator — where reading component details and system information matters — makes Low a poor choice. High at 1080p with 260 FPS provides a strong middle ground.

The data suggests that for a 1440p monitor, High settings at 179 FPS are sufficient, but Medium at 254 FPS offers a 42% performance uplift with presumably minimal visual degradation. For 4K displays, Medium is the recommended preset, as it maintains 133 FPS while the higher presets dip below 100 FPS. The minimum frame rate of 113 FPS at 4K Medium indicates good frame pacing, which is important in a simulation where consistent performance aids readability.

FAQ

Q: What is the highest average FPS recorded for this combo?

A: The highest average FPS is 337, achieved at 1920x1080 with Low settings.

Q: How does the combo perform at 4K Ultra settings?

A: At 3840x2160 Ultra, the combo delivers an average of 89 FPS, which is the lowest measured average across all resolution and settings combinations.

Q: What is the difference between 1080p High and 4K High?

A: At 1080p High, the average FPS is 260, while at 4K High it drops to 94 FPS, representing a 64% reduction.

Q: Does the combo maintain consistent frame rates at 1440p Medium?

A: Yes, the 1440p Medium preset shows a minimum of 216 FPS and a maximum of 292 FPS, with an average of 254 FPS, indicating consistent performance.

Q: How does the RTX 5090 D compare to its closest rival in average benchmark score?

A: The RTX 5090 D has an average benchmark score of 77712, which is 1.1% higher than the AMD Radeon RX 6650M XT (76904) and 1.6% lower than the AMD Radeon RX 6850M XT (78940).

Q: What is the combo's rank among all tested combinations in this game?

A: The combo ranks 113th out of 3002 tested combinations in Pc Building Simulator.

CPU Role

The AMD Ryzen 5 5600GT is a 6-core, 12-thread processor from the 5000 series, built on the Zen 3 architecture with the Cezanne codename. It operates at a base clock of 3.60 GHz with a boost clock of 4.60 GHz, and has a TDP of 65 W. The CPU features a 7 nm process node from TSMC, with 10,700 million transistors on a 180 mm² die. Cache configuration includes 64 KB of L1 per core, 512 KB of L2 per core, and 16 MB of L3 cache. Memory support is DDR4 with dual-channel configuration and 51.2 GB/s bandwidth.

In Pc Building Simulator, the CPU's performance is sufficient to drive the RTX 5090 D to high frame rates, particularly at lower resolutions. The 3dmark_max_threads score of 5554 and 3dmark_16_threads score of 5523 indicate that the processor's multi-threaded capabilities are adequate for this simulation title. The Cinebench R23 multicore score of 17272 and single-core score of 2438 provide context for its overall compute capability.

The CPU ranks at the 74th percentile among all CPUs, with an average benchmark score of 20733. Its nearest rivals in the benchmark database include the Intel Core i5-12490F with an average score of 20802 (0.3% higher), the Intel Xeon 6325P at 20821 (0.4% higher), the Intel Core Ultra 5 125U at 20826 (0.4% higher), and the AMD EPYC 7J13 at 20845 (0.5% higher). These small deltas indicate that the Ryzen 5 5600GT sits in a tightly competitive performance band.

The single-thread performance, measured at 913 in 3dmark_single_thread and 3348 in passmark_single_thread, is what matters most for Pc Building Simulator's simulation logic. The game's calculations, which involve tracking component specifications, temperatures, and system performance metrics, likely rely on single-threaded operations. The CPU's boost clock of 4.60 GHz helps ensure these operations complete quickly, allowing the GPU to render frames without waiting on the CPU.

At 1080p Low, the combo reaches 337 FPS, which suggests the CPU is not a bottleneck at this resolution and settings combination. The fact that 1080p Ultra still achieves 256 FPS indicates there is headroom in the CPU's performance. The CPU's integrated graphics, Radeon Vega 7, are irrelevant here since the system uses the discrete RTX 5090 D, but their presence confirms the processor's design as an APU with versatility.

Measured FPS Breakdown

The measured FPS data covers three resolutions and four settings presets, providing a comprehensive view of the combo's performance. At 1920x1080, the results are as follows: Low averages 337 FPS, Medium averages 296 FPS with a minimum of 252 and maximum of 341, High averages 260 FPS, and Ultra averages 256 FPS. The progression from Low to Ultra shows a 24% performance drop, which is modest and indicates the GPU handles the increased visual workload efficiently at this resolution.

At 2560x1440, the averages are 289 FPS for Low, 254 FPS for Medium (minimum 216, maximum 292), 179 FPS for High, and 171 FPS for Ultra. The spread between Low and Ultra here is 41%, wider than at 1080p. The Medium preset's minimum of 216 FPS ensures smooth gameplay even during demanding scenes. The drop from Medium to High is 75 FPS, which is substantial and suggests High adds significant visual effects that impact performance.

At 3840x2160, the averages are 187 FPS for Low, 133 FPS for Medium (minimum 113, maximum 153), 94 FPS for High, and 89 FPS for Ultra. The gap between Low and Medium is 54 FPS, between Medium and High is 39 FPS, and between High and Ultra is just 5 FPS. The diminishing returns between High and Ultra at 4K are clear, making Ultra a questionable choice when the performance gain from High is minimal.

The only preset with complete minimum and maximum data is Medium across all three resolutions. At 1080p, the range is 252 to 341 FPS (89 FPS spread). At 1440p, it narrows to 216 to 292 FPS (76 FPS spread). At 4K, it tightens further to 113 to 153 FPS (40 FPS spread). This trend of narrowing frame rate ranges at higher resolutions suggests that the GPU becomes more consistently loaded as resolution increases, reducing frame time variance.

How This Combo Ranks

The AMD Ryzen 5 5600GT with NVIDIA GeForce RTX 5090 D combination ranks 113th out of 3002 tested combos in Pc Building Simulator. This places the combo in the top 3.8% of all tested configurations, which is a strong showing given the CPU's mid-range positioning. The ranking reflects the dominance of the RTX 5090 D in driving frame rates for this simulation title.

The GPU's percentile ranking of 92 among all GPUs, combined with the CPU's 74th percentile ranking, creates an asymmetric pairing. The GPU is clearly the stronger component, and the combo's overall rank benefits from the GPU's high performance. The CPU's average benchmark score of 20733 places it near several Intel and AMD parts, but none of these rivals are paired with the RTX 5090 D in this benchmark set.

The gap between the combo's rank and what either component might achieve individually suggests that Pc Building Simulator is more GPU-bound than CPU-bound. The CPU's 6 cores and 12 threads at up to 4.60 GHz are sufficient for this game, allowing the GPU to reach 337 FPS at 1080p Low. If the game were highly CPU-dependent, the combo would likely rank lower given the CPU's mid-tier positioning.

The ranked position of 113 out of 3002 indicates that most higher-ranking combos likely feature more powerful CPUs paired with high-end GPUs. However, the fact that this combo outperforms the vast majority of tested configurations demonstrates that the RTX 5090 D's raw strength compensates for the CPU's limitations in this specific game. The data confirms that for Pc Building Simulator, the GPU choice matters more than CPU selection, and the RTX 5090 D delivers exceptional frame rates even when paired with a mid-range processor.