Pc Building Simulator

Resolution Scaling

The measured FPS data shows a steep performance curve as resolution increases, revealing a GPU-bound scenario at high settings. At 1080p High, the AMD Ryzen 5 5600 + NVIDIA GeForce GTX 1070 combo delivers 93.2 FPS. Moving to 1440p High drops that to 59.6 FPS, a 36% reduction. At 4K High, the frame rate collapses to 28.8 FPS, which is 69% below the 1080p figure. This scaling pattern indicates that the GeForce GTX 1070 becomes the limiting component well before 4K is reached.

The Low preset tells a different story. At 1080p Low, the system produces 184.9 FPS, which drops to 116.3 FPS at 1440p and 60.7 FPS at 4K. The 4K Low result is still playable, but the gap between Low and High at 4K (60.7 vs 28.8 FPS) demonstrates how heavily this game's higher presets tax the GPU. The GTX 1070's 8 GB of GDDR5 memory and 256-bit bus are adequate for 1080p and 1440p, but the pixel throughput required at 3840x2160 overwhelms the card's 107.7 GPixel/s fill rate.

Benchmark results indicate that 1440p is the practical ceiling for this combination at medium-to-high settings. The 1440p Medium score of 82.7 FPS is smooth, while 1440p High at 59.6 FPS remains acceptable for a simulation title. At 4K, only the Low preset crosses the 60 FPS threshold, and even then barely. The data suggests that players targeting 4K should expect to compromise heavily on visual quality, as the Ultra preset at 4K yields just 28 FPS — essentially a slideshow for this genre.

Settings Recommendations

The optimal experience for this combo is the Medium preset at 1440p. The measured 82.7 FPS provides a comfortable margin above the 60 FPS playability threshold while retaining more visual fidelity than Low. At 1080p, the Medium preset delivers 132.7 FPS, which is ideal for high-refresh monitors, and the jump to High only costs 39.5 FPS (132.7 to 93.2). For players who prioritize frame rate over visuals, 1080p Low at 184.9 FPS is excessive for Pc Building Simulator's simulation gameplay, where precision matters more than twitch response.

The data shows that High preset at 1440p (59.6 FPS) is borderline — it hovers just under 60 FPS and may cause noticeable hitches during intense simulation moments. The Ultra preset at 1440p (56.9 FPS) offers no meaningful advantage over High for the 2.7 FPS loss. At 4K, the only viable option is Low (60.7 FPS), as Medium (42 FPS) and High (28.8 FPS) fall below acceptable playability. The Ultra preset at any resolution above 1080p is not recommended; at 1080p Ultra (86.1 FPS) it is playable but delivers only 7.1 FPS more than Medium while imposing significantly higher GPU load.

The sweet spot is 1440p Medium. It balances the GTX 1070's capabilities with the game's simulation demands, and the 82.7 FPS result leaves headroom for background processes. For 1080p users, Medium or High both work well, with High providing the best visual-to-performance ratio at 93.2 FPS.

FAQ

Q: Can this combo run Pc Building Simulator at 4K?

A: Yes, but only at Low settings, where it achieves 60.7 FPS. Medium drops to 42 FPS, High to 28.8 FPS, and Ultra to 28 FPS — none of which are smooth for a simulation game.

Q: What is the best resolution for this GPU and CPU pairing?

A: The measured data indicates 1440p is the optimal resolution. At Medium settings, the combo delivers 82.7 FPS at 2560x1440, which is well above the playability threshold. At 1080p, results are higher but the GPU is less stressed, suggesting the CPU has more headroom than needed.

Q: How does the GTX 1070's 8 GB VRAM hold up in this game?

A: The 8 GB GDDR5 memory is sufficient for all tested settings and resolutions. The bottleneck appears to be the GPU's computational throughput rather than memory capacity, as evidenced by the steep FPS drops when raising settings at 4K.

Q: Is the Ryzen 5 5600 holding back the GTX 1070?

A: Benchmark data suggests no CPU bottleneck at any tested resolution. The 6-core, 12-thread processor with a 4.40 GHz boost clock delivers strong single-thread performance (882 in 3dmark_single_thread), which is more than adequate for this simulation title.

Q: What FPS can I expect at 1080p Ultra?

A: The measured average FPS is 86.1. This is playable but only slightly above the 1440p Medium result of 82.7 FPS, indicating that the Ultra preset at 1080p stresses the GPU nearly as much as Medium at 1440p.

How This Combo Ranks

This combination ranks 1491 out of 1769 tested combos in Pc Building Simulator, placing it in the bottom 16% of all configurations. This relatively low ranking reflects the GTX 1070's age — it sits at the 51st percentile among all GPUs — rather than any CPU deficiency. The Ryzen 5 5600, by contrast, ranks at the 79th percentile among all CPUs, with an average benchmark score of 21765 that places it within 0.9% of the Intel Core i7-11700F.

The combo's rank is dragged down by the GPU's modest compute capabilities. The GTX 1070's average benchmark score of 12331 is nearly identical to the NVIDIA Quadro K4200 (12241, +0.7%) and the GeForce GTX 1650 SUPER (12504, -1.4%). In a simulation game that is not graphically demanding, this GPU still manages to produce playable frame rates at 1080p and 1440p, but the 4K results are insufficient for a comfortable experience.

The CPU's strong showing in synthetic benchmarks — particularly the Cinebench R23 multicore score of 18309 and single-core score of 2584 — suggests that the Ryzen 5 5600 is not the limiting factor in this pairing. The data shows that upgrading the GPU would yield significant FPS gains, while a CPU upgrade would provide negligible improvement for this specific game.

GPU Role

The NVIDIA GeForce GTX 1070 is the clear performance limiter in this combo. Its Pascal architecture, built on a 16 nm process, features 1920 shading units, 120 texture mapping units, and 64 ROPs. The card's boost clock of 1683 MHz and base clock of 1506 MHz are modest by modern standards, producing 6.463 TFLOPS of FP32 performance. The 8 GB of GDDR5 memory runs at 2002 MHz (8 Gbps effective) across a 256-bit bus, yielding 256.3 GB/s of bandwidth.

The measured FPS data shows that the GTX 1070's fill rate and compute capabilities are the primary constraints at higher resolutions. At 4K Ultra, the card produces just 28 FPS, while at 4K Low it manages 60.7 FPS — a 2.2x improvement that underscores how much headroom exists in lower presets. The card's 107.7 GPixel/s pixel rate and 202.0 GTexel/s texture rate are clearly insufficient for 4K high-detail rendering in this game.

The GTX 1070's benchmark scores reflect its mid-range positioning. Its Passmark G3D score of 13498 places it at the 51st percentile of all GPUs, and its 3DMark Steel Nomad DX12 score of 1082 is modest. The card's DirectX 12 score of 48 in Passmark is notably low, though Pc Building Simulator does not appear to be heavily dependent on DX12 features based on the playable 1080p results. The GPU's 150 W TDP and 450 W suggested PSU are reasonable for the performance delivered.

Measured FPS Breakdown

At 1920x1080, the combo delivers its best results. Low settings produce 184.9 FPS, Medium 132.7 FPS, High 93.2 FPS, and Ultra 86.1 FPS. The difference between High and Ultra is just 7.1 FPS, suggesting that Ultra's additional effects are not worth the performance cost at this resolution.

At 2560x1440, the numbers drop significantly. Low settings achieve 116.3 FPS, Medium 82.7 FPS, High 59.6 FPS, and Ultra 56.9 FPS. The Medium preset at 1440p is the best overall combination of quality and frame rate in the entire dataset, delivering 82.7 FPS with visual improvements over Low.

At 3840x2160, only Low settings remain playable. Low produces 60.7 FPS, Medium 42 FPS, High 28.8 FPS, and Ultra 28 FPS. The gap between Medium and High at 4K is 13.2 FPS, while the gap between High and Ultra is just 0.8 FPS — indicating that Ultra offers no meaningful benefit over High at this resolution.

The full dataset shows a consistent pattern: each settings tier costs roughly 30-40% of the previous tier's frame rate at a given resolution. At 1080p, the drop from Low to Medium is 52.2 FPS, from Medium to High is 39.5 FPS, and from High to Ultra is 7.1 FPS. This diminishing penalty at higher presets suggests the GPU becomes saturated with compute work before the final quality tier is reached.

CPU Role

The AMD Ryzen 5 5600 plays a supporting role in this combo, and the data shows it is not the bottleneck. With 6 cores and 12 threads based on Zen 3 architecture, this CPU delivers strong multi-threaded performance: 18309 in Cinebench R23 multicore and 21541 in Passmark multithread. Its single-thread capabilities are equally impressive, with 2584 in Cinebench R23 single-core and 882 in 3dmark_single_thread.

The CPU's 3.50 GHz base clock and 4.40 GHz boost clock, combined with 32 MB of shared L3 cache, provide ample processing power for Pc Building Simulator's simulation logic. The 79th percentile ranking among all CPUs confirms that this processor is well above average, and its average benchmark score of 21765 places it within 0.6% of the AMD EPYC 9554P and 0.9% of the Intel Core i7-11700F.

The fact that FPS scales directly with resolution — 184.9 at 1080p Low versus 60.7 at 4K Low — indicates the GPU is the limiting factor. If the CPU were the constraint, frame rates would remain similar across resolutions. The 6-core, 12-thread configuration is more than sufficient for this game, which is a simulation title that does not require extreme core counts. The CPU's 65 W TDP and 7 nm process also mean it runs cool and leaves thermal headroom for the GPU.