Palworld
This combination offers playable performance with an average of 36 FPS, though you may want to lower settings for smoother gameplay.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 13 | 17 | 21 | 27 |
| 1440p QHD | 23 | 30 | 39 | 48 |
| 1080p Full HD | 34 | 45 | 59 | 73 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Palworld with Intel Core Ultra 7 265 + NVIDIA GeForce GTX 1650, In-Depth Analysis
Palworld on this Intel Core Ultra 7 265 and NVIDIA GeForce GTX 1650 combination is a study in compromise, with the measured frames strongly suggesting the GPU is the primary bottleneck at every resolution. The 4 GB VRAM and the Turing-based chip are pushed to their limits by the survival title’s open-world demands, and the data shows that only the lowest settings provide a consistently playable experience at standard resolutions.
Settings Recommendations
The measured FPS rows make the optimal settings path clear. At 1920x1080, the Low preset delivers an average of 73 FPS, which is the only configuration in the entire dataset that clears the 60 FPS threshold comfortably. The Medium preset at the same resolution drops to 59 FPS average, which is technically playable but with minimums that are not recorded, leaving less headroom for the unpredictable moments of combat or base-building that Palworld throws at a system. High at 1080p falls to 45 FPS, and Ultra plummets to 34 FPS. For a smoother experience, the data indicates that Low is the only sensible choice if you want to maintain fluidity. The gap between Low and Medium is 14 FPS, which is significant, but the jump from Medium to High is another 14 FPS, showing that the cost of higher visual fidelity is steep. Given that the Ultra preset at 1080p produces an average below the refresh rate of most modern monitors, it should be avoided entirely.
At 2560x1440, the situation worsens. The Low preset manages an average of 48 FPS, which is borderline for a game that benefits from quick reactions. Medium averages 39 FPS, and High drops to 30 FPS exactly. The Ultra preset at this resolution is effectively unplayable at 23 FPS. The recommendation here is to stick with Low if you must run at 1440p, but the data strongly suggests that dropping to 1080p is the better trade-off for playability. For 4K, the numbers are brutal: the best-case scenario is Low at 27 FPS, with every other preset below 21 FPS. There is no reasonable settings recommendation for 4K on this combo; the GPU simply does not have the resources to handle the pixel count.
GPU Role
The NVIDIA GeForce GTX 1650 is the clear limiting factor in this pairing. With 4 GB of GDDR5 memory on a 128-bit bus, the card is constrained by both capacity and bandwidth. The data shows a consistent pattern where lowering settings has a massive impact on FPS, which is typical of a GPU-bound scenario. At 1080p, dropping from Ultra to Low nearly doubles the average FPS from 34 to 73. This scaling is far more aggressive than what would be expected from a CPU limit. The card’s boost clock of 1665 MHz and base clock of 1485 MHz are not the issue; rather, the 128.1 GB/s of memory bandwidth and the 896 shading units are simply overwhelmed by Palworld’s draw distances and asset streaming. The GPU’s PassMark G3D score of 7880 places it in the 40th percentile of all GPUs, and its nearest rivals include the Intel Arc A310 and AMD Radeon R7 350, which are entry-level parts.
The 4 GB VRAM is likely the reason why the High and Ultra presets see such dramatic drops. Palworld’s world is dense with creatures, structures, and foliage, and the textures required for those presets can easily exceed 4 GB. When the VRAM fills, the card has to swap data out, causing stutters and frame dips. The measured minimums on Medium at 1440p (33 FPS) and 1080p (50 FPS) show that even at that preset, the card is working hard to maintain a consistent frame delivery. The GTX 1650’s end-of-life production status is reflected in these results, as modern titles continue to push beyond its capabilities. The compute performance, with an FP32 rating of 2.984 TFLOPS, is insufficient for the game’s physics and lighting calculations at higher settings.
Resolution Scaling
The FPS drop from 1080p to 4K is severe and reveals the GPU bottleneck. At Low settings, the average FPS goes from 73 at 1920x1080 to 48 at 2560x1440, and then down to 27 at 3840x2160. That is a reduction of roughly 34% from 1080p to 1440p, and another 44% from 1440p to 4K. This scaling is not linear because the pixel count increases by 1.78x from 1080p to 1440p and by 2.25x from 1440p to 4K, but the performance drop is steeper, indicating that the card’s memory bandwidth and fill rate are being saturated. At High settings, the pattern is similar: 45 FPS at 1080p, 30 FPS at 1440p, and 17 FPS at 4K. The card is losing more than half its performance from 1080p to 4K, which is a clear sign that it is not the CPU holding things back.
The data shows that the Core Ultra 7 265 is not the limiting component here. If the CPU were the bottleneck, we would expect to see smaller differences between resolutions, as the CPU’s workload is largely independent of pixel count. Instead, the FPS scales directly with the number of pixels, which is the hallmark of a GPU-bound scenario. The fact that the 1080p Low preset hits 73 FPS while the 4K Low preset only reaches 27 FPS confirms that the GTX 1650 is running out of raw throughput. For a practical takeaway, this means that players should not expect to use this combo with a 4K monitor for anything other than static screenshots. The sweet spot for this pairing is clearly 1080p, where the card can still provide a playable frame rate on lower presets.
How This Combo Ranks
The combined rank of this CPU and GPU pairing in Palworld is 2845 out of 2944 tested combinations. This places it in the bottom 4% of all systems, which is a stark assessment of its gaming potential. The Core Ultra 7 265 is a powerful processor on its own, with a passmark multithread score of 49682 and a percentile ranking of 93 against all CPUs, but it is being completely held back by the GTX 1650. The combo rank is a measure of how well the two parts work together for a specific game, and the data shows that this is a severely mismatched pairing for Palworld. The GPU’s average benchmark score of 7472 puts it in the 40th percentile among all GPUs, and its nearest rivals include the Intel UHD Graphics 750 and AMD Radeon HD 8850M, which are integrated or older mobile parts. This pairing is effectively a high-end CPU bolted to a low-end GPU, and the combo rank reflects that imbalance.
The rank of 2845 means that almost every other combination of CPU and GPU in the database delivers better performance in Palworld. This is not a surprise given the FPS numbers, but it quantifies just how far behind this system is. The CPU’s nearest rivals, such as the AMD EPYC 4464P and the Intel Core Ultra 7 265F, have similar average scores, but they are likely paired with more capable graphics cards in the tested configurations. The bottleneck is not the CPU’s fault; it is the GPU’s inability to keep up. For a builder, this rank is a warning that investing in this CPU for gaming requires a far better GPU than the GTX 1650 to achieve acceptable results.
CPU Role
The Intel Core Ultra 7 265 is a 20-core, 20-thread processor based on the Arrow Lake architecture, with a boost clock of up to 5.30 GHz and a base clock of 2.40 GHz. Its bench results are strong, with a Cinebench R23 multicore score of 42216 and a single-core score of 5960. The PassMark single-thread score of 4689 is also respectable. However, in Palworld, the CPU’s role is largely secondary to the GPU, as the measured FPS is consistently low across all resolutions. The data suggests that the CPU is not being fully utilized because the GPU cannot feed it enough frames. The CPU’s 30 MB of L3 cache and 3 MB per-core L2 cache are more than sufficient for the game’s logic and AI, but those resources are wasted when the GPU is only producing 17 FPS at 4K.
The CPU’s performance relative to its rivals is strong. It is within 1% of the AMD EPYC 4464P and the AMD EPYC 9124 in average benchmark scores, but those comparisons are for general compute, not gaming. In Palworld, the CPU’s high single-core performance is what matters for game logic, and the 5.30 GHz boost clock ensures that it is not the bottleneck in most scenarios. However, the measured FPS at 1080p Low is 73, which is a frame rate that the CPU could easily handle with a better GPU. The fact that the FPS drops to 34 at 1080p Ultra is entirely due to the GPU’s limitations, not the CPU. This is a case where the CPU has far more headroom than the GPU can use, making it a poor match for this particular graphics card in a demanding title like Palworld.
Measured FPS Breakdown
At 1920x1080, the measured average FPS values are as follows: Low delivers 73 FPS, Medium delivers 59 FPS with a minimum of 50 and a maximum of 68, High delivers 45 FPS, and Ultra delivers 34 FPS. The Medium preset is the only one with recorded minimum and maximum values, showing a range that stays within a playable band, but the Low preset’s higher average is more desirable for a stable experience. The step from Low to Medium is a 14 FPS loss, and from Medium to High is another 14 FPS loss, while the step from High to Ultra is an 11 FPS loss. These are large margins, indicating that each settings tier has a substantial impact on the GPU’s workload.
At 2560x1440, the average FPS values are: Low at 48 FPS, Medium at 39 FPS with a minimum of 33 and a maximum of 45, High at 30 FPS, and Ultra at 23 FPS. The Medium preset’s minimum of 33 FPS is the lowest recorded for any preset at this resolution with a minimum, and it shows that the card is struggling to maintain a consistent frame rate. At 3840x2160, the values are: Low at 27 FPS, Medium at 21 FPS with a minimum of 18 and a maximum of 25, High at 17 FPS, and Ultra at 13 FPS. The 4K Medium preset has the lowest minimum FPS in the entire dataset at 18, which is a slideshow by any standard. The data across all resolutions shows a clear and consistent pattern: the GTX 1650 cannot handle Palworld at anything above Low settings at 1080p, and even then, the margin for error is thin. The 4K results are purely academic and not recommended for actual play.
Hardware Specifications
Intel Core Ultra 7 265
NVIDIA GeForce GTX 1650
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core Ultra 7 265 + NVIDIA GeForce GTX 1650 in Palworld
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 27.0 |
| 3840x2160 | Medium | 21.0 |
| 3840x2160 | High | 17.0 |
| 3840x2160 | Ultra | 13.0 |
| 2560x1440 | Low | 48.0 |
| 2560x1440 | Medium | 39.0 |
| 2560x1440 | High | 30.0 |
| 2560x1440 | Ultra | 23.0 |
| 1920x1080 | Low | 73.0 |
| 1920x1080 | Medium | 59.0 |
| 1920x1080 | High | 45.0 |
| 1920x1080 | Ultra | 34.0 |
Palworld with iUltra 7 265 + Other GPUs
See how Palworld performs with the same CPU but different graphics cards.
Palworld with GTX 1650 + Other CPUs
See how Palworld performs with the same GPU but different processors.
Other Games with iUltra 7 265 + GTX 1650
Explore FPS benchmarks for other games using this same hardware combination.