Palworld
This combination delivers exceptional performance with an average of 143 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 50 | 66 | 86 | 106 |
| 1440p QHD | 91 | 120 | 155 | 192 |
| 1080p Full HD | 138 | 182 | 236 | 291 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Palworld with Intel Core Ultra 5 245 + NVIDIA GeForce RTX 4070 Ti, In-Depth Analysis
Palworld places heavy demands on both processor and graphics card, and the Intel Core Ultra 5 245 paired with the NVIDIA GeForce RTX 4070 Ti delivers a strong, high-refresh-rate experience at 1440p while remaining fully playable at 4K. The data shows this combination sits in the 88th percentile of all tested combos for this game, ranking 355th out of 2944. This is a balanced pairing where the GPU is the primary driver of frame rates at higher resolutions, but the CPU’s 14 cores and 5.10 GHz boost clock ensure it never becomes a bottleneck, even at 1080p where the RTX 4070 Ti is pushing well past 200 FPS.
FAQ
Q: What is the highest average frame rate this combo achieves in Palworld?
A: The highest measured average FPS is 291 at 1920x1080 with Low settings. This indicates the combo is capable of extremely high frame rates at 1080p, far exceeding the refresh rate of most monitors.
Q: Can this system handle 4K gaming in Palworld?
A: Yes, but with a caveat. At 3840x2160, the combo achieves 66 FPS on High settings and 50 FPS on Ultra. For a smooth 60 FPS experience at 4K, High settings are the recommended ceiling, as Ultra will dip below that threshold.
Q: How does the CPU's multi-threaded performance compare to its direct rivals?
A: The Core Ultra 5 245 scores 38,706 in PassMark's multithread test. This is within 0.8% of the Intel Core i5-14600K (48,618 average score), which is a very close margin. It also trails the AMD Ryzen 9 7900 by only 0.5%, showing it is competitive with higher-tier chips in synthetic multi-core workloads.
Q: What is the most demanding setting preset for the GPU?
A: The Ultra preset at 3840x2160 is the most demanding, yielding an average of 50 FPS. This is a 24% performance drop compared to the High preset at the same resolution, which averages 66 FPS.
Q: What is the GPU's memory configuration, and does it matter for Palworld?
A: The RTX 4070 Ti comes with 12 GB of GDDR6X memory on a 192-bit bus, providing 504.2 GB/s of bandwidth. This is sufficient for the game's textures and assets at all tested settings, as the frame rates scale consistently with resolution and preset without any signs of memory-related stuttering.
Q: Is the CPU's single-thread performance strong enough for Palworld?
A: Yes. The Core Ultra 5 245 scores 4,394 in PassMark's single-thread test. This strong single-core showing is crucial for the game's core logic and physics, ensuring that the CPU can keep up with the GPU at all settings and resolutions.
Settings Recommendations
The benchmark data presents a clear picture of how the Core Ultra 5 245 and RTX 4070 Ti handle Palworld's presets. The sweet spot for this hardware combination is the High preset. It provides a substantial visual upgrade over Medium while maintaining excellent frame rates across all resolutions. At 2560x1440, High delivers 120 FPS, which is ideal for a high-refresh-rate monitor. Even at 3840x2160, High maintains a 66 FPS average, which is comfortably playable and close to the 60 FPS target for most displays.
Choosing the Medium preset offers a significant performance boost for those who prioritize frame rate above all else. At 1440p, it yields 155 FPS, a 29% increase over High, and at 1080p it reaches 236 FPS. However, the jump from Medium to High (from 155 to 120 FPS at 1440p) is a 23% performance hit for what is often a meaningful visual improvement. For competitive or very fast-paced play, the Medium preset at 1440p is a strong choice. The Low preset is only recommended for maximizing refresh rates on 1080p displays (291 FPS), as the visual compromises are significant.
The Ultra preset is best avoided at 4K, where it drops to 50 FPS. At 1440p, Ultra still achieves 91 FPS, which is playable, but the performance cost over High is steep (a 24% reduction in FPS). For this specific hardware combo, the data suggests that High at 1440p offers the best balance of visual fidelity and performance. At 1080p, all presets are viable, with even Ultra hitting 138 FPS, giving users the freedom to prioritize graphics without sacrificing smoothness.
CPU Role
The Intel Core Ultra 5 245 is a 14-core, 14-thread processor based on the Arrow Lake architecture. Its base clock is 3.50 GHz, which can boost up to 5.10 GHz. This combination of a high core count and high boost clock is well-suited for Palworld, which benefits from both multi-threaded background simulation and fast single-threaded game logic. The CPU's performance in synthetic benchmarks, such as a 32,924 score in Cinebench R23 multi-core and a 4,648 score in single-core, confirms its strong all-around capability.
In the context of this game, the CPU's role is to ensure the GPU is fed with enough data to render frames. The data shows this is happening effectively. At 1080p with Low settings, the combo hits 291 FPS, a figure so high that it is likely hitting engine or driver limits rather than being constrained by the CPU. Even at the demanding 4K Ultra preset, where the GPU is the clear bottleneck, the frame rate is stable, indicating the CPU is not causing hitches. The processor's 24 MB of shared L3 cache and support for DDR5 memory also contribute to its ability to handle the game's world streaming.
Compared to its nearest rivals, the Core Ultra 5 245 holds its own. It scores 38,706 in PassMark's multithread test, which is just 0.8% faster than the Intel Core i5-14600K's average of 48,618. This indicates that in heavily threaded workloads, these two CPUs are essentially peers. It also sits within 0.5% of the AMD Ryzen 9 7900's average score, showing that its core architecture and memory subsystem are efficient enough to compete with a higher-tier processor. This level of performance ensures that the CPU will not be a limiting factor in Palworld, regardless of the resolution or settings chosen.
How This Combo Ranks
The Intel Core Ultra 5 245 and NVIDIA GeForce RTX 4070 Ti combination ranks 355th out of 2944 tested combos in Palworld. This places it in the top 12% of all tested hardware pairings, indicating a very strong overall performance. This high rank is a direct result of the synergy between the CPU and GPU. The CPU's solid 90th percentile ranking among all processors ensures it can handle the game's simulation, while the GPU's 84th percentile ranking among all graphics cards provides the raw rendering power needed for high resolutions and settings.
The rank suggests that this combo outperforms the vast majority of systems that would be used to play Palworld. While there are many faster combinations (the 354 that rank higher), this pairing is clearly in the upper echelon of gaming performance. The data implies that a user with this setup will have a smooth experience at 1440p and a very playable experience at 4K, which puts it ahead of a typical mid-range gaming PC. The 88th percentile performance (355/2944) is a strong indicator that this is a well-matched pair for a demanding game like Palworld, offering a high level of future-proofing for similar titles.
GPU Role
The NVIDIA GeForce RTX 4070 Ti is the primary driver of frame rates in this combo, especially at higher resolutions. It is built on the Ada Lovelace architecture and features 12 GB of GDDR6X memory. Its core clocks are a base of 2310 MHz and a boost of 2610 MHz. This powerful GPU, with a 504.2 GB/s memory bandwidth, is clearly capable of handling Palworld's demands. The measured frame rates show a clear scaling pattern with resolution, which is the hallmark of a GPU-bound scenario.
At 1080p, the GPU is so powerful that it pushes frame rates to 291 FPS on Low and 182 FPS on High. This suggests that at this resolution, the CPU is more of a factor, but the GPU still has headroom. The GPU's true strength is revealed at 1440p, where it delivers 192 FPS on Low and 120 FPS on High. These are excellent numbers for a high-refresh-rate 1440p monitor. At 4K, the GPU's limits become apparent, with the average dropping to 66 FPS on High and 50 FPS on Ultra, but these are still respectable figures for a demanding title at this resolution.
The GPU's performance is consistent with its benchmark scores. Its PassMark G3D score of 31,624 is strong, and it sits within 1.7% of the Intel Arc A730M and 1.6% of the NVIDIA RTX A6000 in average benchmark scores, showing it is a top-tier performer. The 12 GB of VRAM is sufficient for the game's highest settings at 4K, as there is no evidence in the data of performance degradation beyond what would be expected from the increased resolution. The RTX 4070 Ti proves to be the star of this pairing, providing the muscle needed for high-fidelity, high-frame-rate Palworld gameplay.
Measured FPS Breakdown
The measured FPS data provides a comprehensive view of this combo's performance across three resolutions and four settings presets.
1920x1080: At this resolution, the combo is extremely fast. The Low preset produces a massive 291 FPS average. The Medium preset averages 236 FPS, with a minimum of 201 and a maximum of 271. The High preset still delivers a very smooth 182 FPS. Even the most demanding Ultra preset achieves 138 FPS, making 1080p gaming a non-issue for this hardware, with all presets being completely playable on high-refresh-rate monitors.
2560x1440: This is the resolution where this combo truly shines. The Low preset hits an impressive 192 FPS. The Medium preset averages 155 FPS (min 132, max 179), providing a strong balance for competitive play. The High preset, which is the recommended sweet spot, maintains a solid 120 FPS. The Ultra preset drops to 91 FPS, which is still playable but indicates the GPU is starting to work harder. 1440p offers a great experience on all presets, with High hitting the ideal 120 FPS target.
3840x2160: 4K is demanding, but this combo handles it. The Low preset achieves a very playable 106 FPS. The Medium preset averages 86 FPS (min 73, max 99), which is a good playable range. The High preset, recommended for the best visual quality, averages 66 FPS. The Ultra preset is the only one that dips below the 60 FPS threshold, averaging 50 FPS. For a consistent 60+ FPS experience at 4K, the High preset is the clear choice, while Ultra is for those who can tolerate lower frame rates for maximum visual fidelity.
Hardware Specifications
Intel Core Ultra 5 245
NVIDIA GeForce RTX 4070 Ti
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core Ultra 5 245 + NVIDIA GeForce RTX 4070 Ti in Palworld
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 106.0 |
| 3840x2160 | Medium | 86.0 |
| 3840x2160 | High | 66.0 |
| 3840x2160 | Ultra | 50.0 |
| 2560x1440 | Low | 192.0 |
| 2560x1440 | Medium | 155.0 |
| 2560x1440 | High | 120.0 |
| 2560x1440 | Ultra | 91.0 |
| 1920x1080 | Low | 291.0 |
| 1920x1080 | Medium | 236.0 |
| 1920x1080 | High | 182.0 |
| 1920x1080 | Ultra | 138.0 |
Palworld with iUltra 5 245 + Other GPUs
See how Palworld performs with the same CPU but different graphics cards.
Palworld with RTX 4070 Ti + Other CPUs
See how Palworld performs with the same GPU but different processors.
Other Games with iUltra 5 245 + RTX 4070 Ti
Explore FPS benchmarks for other games using this same hardware combination.