Palworld
This combination offers playable performance with an average of 36 FPS, though you may want to lower settings for smoother gameplay.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 13 | 17 | 22 | 27 |
| 1440p QHD | 23 | 30 | 39 | 48 |
| 1080p Full HD | 35 | 46 | 59 | 73 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Palworld with Intel Core Ultra 5 235 + AMD Radeon RX 570, In-Depth Analysis
Palworld presents a demanding open-world survival scenario where the Intel Core Ultra 5 235 and AMD Radeon RX 570 combination produces a specific performance profile. The data indicates this pairing is positioned in the lower percentile of tested configurations, with a combo rank of 2821 out of 2944 in this game. The measured frames per second across resolutions reveal a system that is consistently constrained, requiring careful settings management to achieve a playable experience. This analysis breaks down the benchmark results, the role of each component, and the practical implications for gameplay.
CPU Role — cores, clocks, and how they relate to this game's results
The Intel Core Ultra 5 235 is a 14-core, 14-thread processor based on the Arrow Lake architecture, built on a 3 nm process by TSMC. It operates with a base clock of 3.40 GHz and a boost clock of 5.00 GHz, with a 65 W TDP. This processor features a 24 MB shared L3 cache and supports DDR5 memory with a dual-channel bus, providing a memory bandwidth of 102.4 GB/s. In synthetic benchmarks, the CPU achieves a Cinebench R23 multi-core score of 14769 and a single-core score of 2085, placing it in the 89th percentile compared to all CPUs.
In Palworld, the CPU's role is critical for managing the game's simulation logic, including the AI for the Pals and the physics of the open world. The processor's 14 cores provide substantial multi-threaded capacity, which is reflected in its strong PassMark multi-thread score of 37816. However, the game's performance at lower resolutions is more likely to be bottlenecked by the GPU, as the CPU's single-core performance, indicated by a PassMark single-thread score of 4516, is sufficient to feed the graphics card. The data shows that at 1080p with Low settings, the average FPS reaches 73, which suggests the CPU can handle the frame generation demands when the GPU is less stressed. The processor's nearest rivals, such as the AMD Ryzen AI 9 HX 375 and Intel Core i9-13900HX, have nearly identical average benchmark scores, with delta percentages of 0.1% and -0.1% respectively, indicating that the Ultra 5 235 is competitive in raw processing power but the final frame rates in Palworld are dominated by the graphics subsystem.
How This Combo Ranks — use comboRankInGame vs other tested combos
The combination of the Intel Core Ultra 5 235 and the AMD Radeon RX 570 ranks 2821 out of 2944 tested combos in Palworld. This places the system in the bottom 5% of all configurations, which is a direct result of the GPU's age and performance class rather than the CPU's capabilities. The ranking indicates that most other tested systems, including those with less powerful CPUs but more modern GPUs, achieve higher frame rates. The data suggests that the CPU is not the primary limiting factor in this pairing; instead, the GPU's raw throughput is the constraint.
For context, the CPU itself performs well in isolation, with an average benchmark score of 46062, putting it in the 89th percentile. Its nearest rivals, including the AMD EPYC 7303 and AMD EPYC 4364P, have average scores of 45960 and 45970, respectively, with delta percentages of 0.2% in favor of the Ultra 5 235. This means the processor is not the reason for the low combo rank. The GPU, however, has a percentile rank of 74 among all GPUs, but its actual performance in Palworld is far below what that percentile might suggest due to the game's specific demands. The massive gap between the CPU's strong relative standing and the combo's low rank underscores that the Radeon RX 570 is the bottleneck, dragging down the overall experience.
Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component
The measured FPS data reveals a clear pattern of performance degradation as resolution increases, which is typical for a GPU-bound system. At 1080p with Low settings, the average FPS is 73. Moving to 1440p at Low, the average drops to 48, a reduction of approximately 34%. At 4K with Low settings, the average falls to 27, which is a 63% drop from the 1080p figure. This steep decline indicates that the GPU's fill rate and memory bandwidth are being overwhelmed at higher resolutions.
The trend is consistent across all settings. For example, at High settings, the average FPS goes from 46 at 1080p to 30 at 1440p and then to 17 at 4K. This shows that the Radeon RX 570, with its 4 GB of GDDR5 memory and 224.0 GB/s bandwidth, is the limiting component. The CPU's performance does not scale inversely with resolution in a way that would cause these drops; rather, the GPU's pixel throughput, rated at 39.81 GPixel/s, is insufficient for the demands of 4K rendering in Palworld. The data implies that for this combo, resolution scaling is a direct measure of GPU load, and the system is firmly GPU-limited across the board.
Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers
The benchmark results provide a complete matrix of performance across four resolutions and four settings presets.
At 3840x2160 (4K), the system produces an average of 27 FPS on Low, 22 FPS on Medium, 17 FPS on High, and 13 FPS on Ultra. The Medium preset is the only one with recorded minimum and maximum values, showing a range of 18 to 25 FPS. These numbers are all below the threshold for smooth gameplay, confirming that 4K is not a viable option for this hardware.
At 2560x1440 (1440p), performance improves but remains limited. The Low preset yields an average of 48 FPS, which is playable in less demanding scenes. Medium averages 39 FPS, with a min-max range of 33 to 45. High drops to 30 FPS, and Ultra falls to 23 FPS. The 1440p Low setting is the only configuration here that approaches a consistently playable frame rate.
At 1920x1080 (1080p), the system shows its best results. The Low preset achieves an average of 73 FPS, which is smooth. Medium averages 59 FPS, with a range of 50 to 68, which is also acceptable for most players. High averages 46 FPS, and Ultra drops to 35 FPS. The 1080p Medium setting appears to be the sweet spot, balancing visual quality with a frame rate that stays above 50 FPS in the measured data.
FAQ — 4-6 Q&A pairs answerable from FACT PACK data
Q: What is the best resolution to play Palworld with this CPU and GPU combo?
A: Based on the measured data, 1920x1080 is the only resolution where the system achieves consistently playable frame rates. At 1080p, the Low preset averages 73 FPS and Medium averages 59 FPS, while at 1440p the highest average is 48 FPS on Low. The 4K results are all below 30 FPS.
Q: Is the Intel Core Ultra 5 235 or the AMD Radeon RX 570 the bottleneck in Palworld?
A: The data indicates the GPU is the primary bottleneck. The CPU ranks in the 89th percentile with a strong multi-core score of 14769 in Cinebench R23, while the GPU's performance in Palworld causes the system to rank 2821 out of 2944 combos. The steep FPS drops at higher resolutions are characteristic of GPU limitation.
Q: How does the CPU compare to its nearest rivals in synthetic benchmarks?
A: The Intel Core Ultra 5 235 has an average benchmark score of 46062. Its nearest rivals, the AMD Ryzen AI 9 HX 375 and Intel Core i9-13900HX, have scores of 46030 and 46098, resulting in delta percentages of 0.1% and -0.1% respectively. This means the three processors are essentially equal in raw compute.
Q: What is the expected frame rate at 1080p with High settings?
A: The measured average FPS at 1920x1080 with High settings is 46. This is below the 60 FPS target but may be acceptable for a survival game. For a smoother experience, the Medium preset provides an average of 59 FPS.
Q: Does the GPU support modern graphics APIs needed for Palworld?
A: The AMD Radeon RX 570 supports DirectX 12 (12_0), OpenGL 4.6, and Vulkan 1.3. These APIs are sufficient for Palworld's requirements, but the GPU's 4 GB of memory and 5.095 TFLOPS of FP32 performance limit its ability to handle high-resolution textures and effects.
Settings Recommendations — which preset gives the best experience per the measured rows
Given the measured data, the optimal settings for this combo depend on the user's priority for frame rate versus visual fidelity. At 1080p, the Medium preset is the best overall choice. It delivers an average of 59 FPS with a minimum of 50 and a maximum of 68, providing a stable experience that is close to the 60 FPS target. The visual upgrade from Low to Medium is substantial, and the performance cost is acceptable.
If a higher frame rate is desired, the Low preset at 1080p offers an average of 73 FPS, which is smoother but at a significant visual sacrifice. For users who prefer higher visual quality over frame rate, the High preset at 1080p averages 46 FPS, which is playable but may experience drops in busy areas. The Ultra preset at 1080p, with an average of 35 FPS, is not recommended as it compromises playability for marginal visual gains.
At 1440p, the Low preset is the only viable option, with an average of 48 FPS. The Medium preset at 1440p averages 39 FPS, which is below the threshold for smooth gameplay. At 4K, no setting is playable, with the highest average being 27 FPS on Low. Therefore, the recommendation is to play at 1080p with Medium settings for the best balance, or 1080p Low if frame rate is the absolute priority.
GPU Role — VRAM, clocks, and how they relate to this game's results
The AMD Radeon RX 570 is a Polaris 20 chip built on a 14 nm process at GlobalFoundries, featuring 2048 shading units, 128 texture mapping units, and 32 raster operation units. It operates at a base clock of 1168 MHz and a boost clock of 1244 MHz, with 4 GB of GDDR5 memory on a 256-bit bus, providing a memory bandwidth of 224.0 GB/s. The GPU's compute power is rated at 5.095 TFLOPS for FP32, and its texture rate is 159.2 GTexel/s.
In Palworld, the GPU's 4 GB of VRAM is a critical limitation. The game's open world with dense foliage and various creatures can easily exceed this capacity at higher resolutions and settings, leading to texture swapping and performance drops. The measured FPS data shows that even at 1080p Ultra, the average is only 35 FPS, indicating that the GPU's raw throughput and memory bandwidth are insufficient for the game's demands. The GPU's percentile rank of 74 among all GPUs is misleading in this context, as Palworld appears to be more demanding than average. The RX 570's nearest rival, the AMD Radeon RX 470, has a nearly identical average benchmark score with a delta of -0.8%, confirming that this GPU class is not suited for modern titles at high settings. The data suggests that the GPU's 4 GB VRAM and 224.0 GB/s bandwidth are the primary reasons for the low frame rates, as the CPU is clearly capable of supporting higher performance.
Hardware Specifications
Intel Core Ultra 5 235
AMD Radeon RX 570
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core Ultra 5 235 + AMD Radeon RX 570 in Palworld
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 27.0 |
| 3840x2160 | Medium | 22.0 |
| 3840x2160 | High | 17.0 |
| 3840x2160 | Ultra | 13.0 |
| 2560x1440 | Low | 48.0 |
| 2560x1440 | Medium | 39.0 |
| 2560x1440 | High | 30.0 |
| 2560x1440 | Ultra | 23.0 |
| 1920x1080 | Low | 73.0 |
| 1920x1080 | Medium | 59.0 |
| 1920x1080 | High | 46.0 |
| 1920x1080 | Ultra | 35.0 |
Palworld with iUltra 5 235 + Other GPUs
See how Palworld performs with the same CPU but different graphics cards.
Palworld with RX 570 + Other CPUs
See how Palworld performs with the same GPU but different processors.
Other Games with iUltra 5 235 + RX 570
Explore FPS benchmarks for other games using this same hardware combination.