Palworld
This combination provides smooth gameplay with an average of 108 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 36 | 50 | 65 | 79 |
| 1440p QHD | 67 | 94 | 117 | 148 |
| 1080p Full HD | 104 | 138 | 179 | 222 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Palworld with Intel Core i7-14700KF + AMD Radeon RX 7800 XT, In-Depth Analysis
Palworld presents an interesting scaling curve for the Intel Core i7-14700KF and AMD Radeon RX 7800 XT pairing, with the data showing a clear transition from a CPU-bound scenario at lower resolutions to a GPU-bound one at 4K. The measured frames per second (FPS) drop significantly as resolution increases, but the rate of that drop is not uniform across settings, which reveals where the bottleneck shifts.
Resolution Scaling
The FPS decline from 1080p to 4K is steep but predictable, with the most dramatic fall occurring at the Ultra preset. At 1080p Ultra, the combo produces 103.6 FPS, which drops to 67.3 FPS at 1440p and then plummets to 35.9 FPS at 4K. That represents a 65% reduction in performance from 1080p to 4K at Ultra, indicating that the RX 7800 XT is being pushed to its limits at higher pixel counts. The Low preset shows a different story: 222.2 FPS at 1080p falls to 148.1 FPS at 1440p and then to 78.8 FPS at 4K. This is a 65% drop as well, but the absolute numbers are much higher, suggesting that at Low settings, the CPU has more headroom to feed frames, and the GPU becomes the primary constraint earlier.
The gap between 1080p and 1440p is smaller than the gap between 1440p and 4K, which is typical for a mid-range to high-end GPU. For instance, at High settings, the difference from 1080p to 1440p is 43.9 FPS (137.9 down to 94), while the difference from 1440p to 4K is 44 FPS (94 down to 50). This consistency implies that the scaling is roughly linear with pixel count, but the 4K results are low enough to suggest that the GPU’s 16 GB of memory and 624.1 GB/s bandwidth are being saturated. The data shows that 4K gaming is only viable at Low and Medium settings, where the FPS stays above 65. At High and Ultra, the 50 FPS and 35.9 FPS averages will feel sluggish for fast-paced action, making 1440p the practical ceiling for this combo when aiming for high refresh rates.
Settings Recommendations
Based on the measured rows, the Medium preset offers the best balance between visual quality and performance across all resolutions. At 1080p Medium, the combo achieves 178.8 FPS, which is more than enough for a high-refresh monitor, and it stays above 116.7 FPS at 1440p. Even at 4K, Medium delivers 65.3 FPS, which is playable for a survival game that doesn’t require twitch reflexes. High settings are a viable alternative at 1080p and 1440p, with 137.9 FPS and 94 FPS respectively, but the 4K High result of 50 FPS is borderline. Ultra should be avoided unless you are on a 1080p display, where 103.6 FPS is acceptable, but the drop to 67.3 FPS at 1440p and 35.9 FPS at 4K makes it a poor choice for anything above 1080p. For most users, Medium is the sweet spot, offering a 29.6% FPS uplift over High at 1440p and a 30.6% uplift at 4K, while the visual difference between Medium and High in Palworld is often negligible in practice.
GPU Role
The AMD Radeon RX 7800 XT is the dominant component in this configuration, particularly at higher resolutions. Its 16 GB of GDDR6 memory on a 256-bit bus provides 624.1 GB/s of bandwidth, which is sufficient for the game’s asset streaming at 1440p, but the 4K Ultra result of 35.9 FPS suggests that the GPU’s compute power, rated at 37.32 TFLOPS FP32, is the limiting factor. The boost clock of 2430 MHz and game clock of 2124 MHz are relatively high, but they don’t prevent the frame rate from collapsing under the load of 4K Ultra. The GPU’s 3DMark Steel Nomad score of 4157 and PassMark G3D score of 24176 place it in the 76th percentile of all GPUs, which is solidly mid-range, but the data shows that Palworld is demanding enough to expose its limits. At 1080p Low, the GPU is not the bottleneck—the 222.2 FPS indicates that the CPU is driving the frame rate, and the RX 7800 XT has plenty of headroom. However, as resolution climbs, the GPU becomes fully utilized, and the frame rate drops accordingly. The 60 ray accelerators and DirectX 12 Ultimate support are present, but the benchmark data does not show a significant Ray Tracing workload, so the focus remains on rasterization performance.
How This Combo Ranks
In the broader database of tested combinations, this pairing ranks 651 out of 1718 combos for Palworld, placing it in the 62nd percentile of all tested systems. This is a respectable position, but not exceptional, given that the i7-14700KF is a high-end CPU and the RX 7800 XT is a capable mid-range GPU. The CPU itself ranks in the 96th percentile of all CPUs, with an average benchmark score of 70104, which is nearly identical to its nearest rival, the Intel Core i7-14700K, which scores 70074 (a 0% delta). The AMD Ryzen 9 9950X scores 70420, which is 0.4% higher, and the Intel Xeon Platinum 8270 scores 71056, which is 1.3% higher. This means the i7-14700KF is not the bottleneck in most scenarios, and the combo’s mid-pack ranking is likely due to the GPU’s 76th percentile standing. The GPU’s nearest rivals include the AMD FirePro S9300 X2 (0.2% higher score) and the NVIDIA P104-100 (0.4% lower score), showing that the RX 7800 XT is competitive with other mid-range options. The 651st ranking out of 1718 suggests that while this combo is above average, there are many faster configurations, particularly those with higher-end GPUs that can handle 4K Ultra better.
CPU Role
The Intel Core i7-14700KF is a 20-core, 28-thread processor with a base clock of 3.40 GHz and a boost clock of 5.60 GHz, built on Intel’s 10 nm process. Its 33 MB of shared L3 cache and 2 MB per-core L2 cache provide ample headroom for gaming workloads. In Palworld, the CPU’s role is most evident at 1080p Low, where the 222.2 FPS result is far above what the GPU could achieve on its own, proving that the processor is feeding frames efficiently. The CPU’s Cinebench R23 multi-core score of 44557 and single-core score of 6290 indicate strong all-around performance, and its PassMark single-thread score of 4480 is high enough to avoid bottlenecking modern games. However, at 4K Ultra, the CPU’s influence diminishes, and the GPU becomes the limiting factor. The data shows that even with a powerful CPU, the RX 7800 XT cannot maintain playable frame rates at 4K Ultra, which is a clear indication that the GPU is the weak link in this pairing. The CPU’s 96th percentile ranking and its negligible performance delta from the i7-14700K (0%) suggest that there is no meaningful benefit to overclocking or upgrading the CPU for this game, as the GPU will hold back performance long before the CPU becomes a constraint. The processor’s support for DDR4 and DDR5 memory, along with its PCIe Gen 5 lanes, ensures it is future-proof, but for Palworld specifically, the CPU is not the star of the show.
Measured FPS Breakdown
The full measured FPS table for this combo is as follows:
- 1920x1080: Low 222.2 FPS, Medium 178.8 FPS, High 137.9 FPS, Ultra 103.6 FPS.
- 2560x1440: Low 148.1 FPS, Medium 116.7 FPS, High 94 FPS, Ultra 67.3 FPS.
- 3840x2160: Low 78.8 FPS, Medium 65.3 FPS, High 50 FPS, Ultra 35.9 FPS.
At 1080p, all settings are playable, with even Ultra surpassing 100 FPS. The step from Medium to High costs 40.9 FPS, and from High to Ultra costs 34.3 FPS, showing a diminishing return on visual fidelity. At 1440p, the Low preset is the only one that exceeds 120 FPS, making it ideal for competitive play. Medium is still smooth at 116.7 FPS, but High drops below 100 FPS, and Ultra falls to 67.3 FPS, which is borderline for a smooth experience. At 4K, only Low and Medium are viable, with 78.8 FPS and 65.3 FPS respectively, while High and Ultra are too demanding. The data consistently shows that the GPU is the limiting factor at 4K, as the FPS drops are proportional to the increased pixel count, regardless of the CPU’s capabilities. For users targeting a 60 FPS baseline, the recommended setup is 1440p Medium or 4K Low, while 1080p High offers a good balance for those who want better visuals without sacrificing too much frame rate. The Ultra preset is only recommended for 1080p displays, where the 103.6 FPS average is still smooth. This breakdown provides a clear guide for optimizing the experience based on the user’s display resolution and performance priorities.
Hardware Specifications
Intel Core i7-14700KF
AMD Radeon RX 7800 XT
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i7-14700KF + AMD Radeon RX 7800 XT in Palworld
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 78.8 |
| 3840x2160 | Medium | 65.3 |
| 3840x2160 | High | 50.0 |
| 3840x2160 | Ultra | 35.9 |
| 2560x1440 | Low | 148.1 |
| 2560x1440 | Medium | 116.7 |
| 2560x1440 | High | 94.0 |
| 2560x1440 | Ultra | 67.3 |
| 1920x1080 | Low | 222.2 |
| 1920x1080 | Medium | 178.8 |
| 1920x1080 | High | 137.9 |
| 1920x1080 | Ultra | 103.6 |
Palworld with ii7-14700KF + Other GPUs
See how Palworld performs with the same CPU but different graphics cards.
Palworld with RX 7800 XT + Other CPUs
See how Palworld performs with the same GPU but different processors.
Other Games with ii7-14700KF + RX 7800 XT
Explore FPS benchmarks for other games using this same hardware combination.