Palworld
This combination offers playable performance with an average of 55 FPS, though you may want to lower settings for smoother gameplay.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 20 | 26 | 32 | 41 |
| 1440p QHD | 36 | 47 | 58 | 74 |
| 1080p Full HD | 55 | 71 | 89 | 113 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Palworld with Intel Core i5-13400F + NVIDIA GeForce RTX 3050 4 GB, In-Depth Analysis
Palworld presents a demanding workload for the Intel Core i5-13400F paired with the NVIDIA GeForce RTX 3050 4 GB, with benchmark results indicating a system that is firmly constrained by its graphics card, especially at higher resolutions. The measured frame rates show a clear progression from playable at 1080p to a slideshow at 4K, painting a picture of a configuration that is best suited for 1080p gaming with settings adjustments. This analysis breaks down the measured data to understand the role of each component and what users can expect from this specific hardware combination.
Resolution Scaling
The performance degradation from 1080p to 4K is steep and consistent, clearly identifying the GPU as the primary bottleneck in this system. At High settings, the average frame rate drops from 71 FPS at 1920x1080 to 47 FPS at 2560x1440, a reduction of 24 FPS, and then further plummets to just 26 FPS at 3840x2160. This represents a 63% performance loss from 1080p to 4K, a figure that aligns with the increased pixel count that the RTX 3050 must process.
The data indicates that the scaling is not linear, suggesting that the GPU’s memory bandwidth and processing power are being saturated as resolution increases. Moving from Medium to Low settings at 4K provides a significant boost from 32 FPS to 41 FPS, but even the Low preset cannot achieve a playable 60 FPS at 3840x2160. The GPU is simply overwhelmed by the 8.3 million pixels at 4K, making this resolution impractical for this combo. At 2560x1440, the card shows more competence, with Low settings hitting 74 FPS, but High and Medium presets fall into the 47-58 FPS range, indicating that users will have to compromise on visual fidelity to maintain smoother gameplay.
The scaling pattern between 1080p and 1440p is more moderate, with a 34% drop in FPS at High settings (71 to 47). This points to a transition zone where the CPU still has some influence, but the GPU is increasingly becoming the limiting factor. The 1080p results show the CPU is capable of feeding the GPU adequately, as evidenced by the 113 FPS at Low settings, which is a strong indicator that the i5-13400F is not holding back the system at this resolution. The sharp drop-off at 4K, regardless of settings, confirms that the RTX 3050's 4 GB VRAM and 128-bit memory interface are the key constraints for this game.
GPU Role
The NVIDIA GeForce RTX 3050 4 GB is the definitive performance limiter in this configuration. With 4 GB of GDDR6 memory on a 128-bit bus, the card offers a memory bandwidth of 192.0 GB/s, which is insufficient for the high-resolution textures and geometry that Palworld's open world demands. The measured results show that at 4K, the card falls below 30 FPS on every preset except Low, where it still only manages 41 FPS. This indicates that the GPU's raw compute power, rated at 7.127 TFLOPS FP32, is not enough to handle the pixel shader workload at that resolution.
The card's clock speeds, with a base of 1545 MHz and a boost of 1740 MHz, are typical for the Ampere architecture, but they do not compensate for the memory limitations. The 4 GB VRAM capacity is particularly problematic, as Palworld is known for its large maps and many dynamic objects, which can easily exceed this amount of memory at higher settings. While the data does not include VRAM usage, the performance collapse at 4K suggests that the card is likely hitting its memory ceiling, causing texture streaming issues that further degrade frame rates.
In the context of this game, the RTX 3050's 2048 shading units and 32 ROPs are the hardware that must render the final image. The measured data shows that at 1080p Medium, the card achieves an average of 89 FPS, which is a respectable result. However, the gap between High (71 FPS) and Ultra (55 FPS) at the same resolution shows that the card's performance headroom is quickly exhausted as settings are increased. The benchmark results indicate that the GPU is operating at its limits for this title, and users should not expect to run the game at maximum settings without significant frame rate penalties.
FAQ
Q: Can this system run Palworld at 4K resolution?
A: No, the measured data shows that at 3840x2160, the average frame rate is only 26 FPS on High settings and 20 FPS on Ultra, making the game unplayable at this resolution. Even on Low settings, the frame rate only reaches 41 FPS, which is below the standard for smooth gameplay.
Q: What is the best resolution for this CPU-GPU combo?
A: The data indicates that 1920x1080 is the optimal resolution, with the system achieving 113 FPS on Low, 89 FPS on Medium, and 71 FPS on High settings. At 2560x1440, only the Low preset reaches a playable 74 FPS, while higher presets fall below 60 FPS.
Q: How does the RTX 3050 4 GB perform in Palworld compared to other settings?
A: The GPU shows a significant performance drop as settings increase. At 1080p, going from Low to Ultra reduces the average FPS from 113 to 55, a 51% decrease. This indicates that the card is sensitive to the increased graphical demands of higher presets, particularly in terms of texture detail and effects.
Q: Is the Intel Core i5-13400F a bottleneck for the RTX 3050 in this game?
A: The data suggests that the CPU is not the primary bottleneck. At 1080p Low, the system achieves 113 FPS, which is a high frame rate that indicates the CPU can feed the GPU effectively. The performance drops are more pronounced at higher resolutions and settings, which points to the GPU as the limiting factor.
Q: What is the expected frame rate at 1080p with High settings?
A: The measured average FPS for this configuration at 1920x1080 with High settings is 71 FPS. This is a playable frame rate for most users, but it leaves little headroom for demanding scenes, which could cause dips below 60 FPS.
Q: How does this combo rank compared to other tested configurations?
A: The combo ranks 3233 out of 3711 tested combinations in Palworld, placing it in the lower percentile of systems. This ranking reflects the limitations of the RTX 3050 4 GB, which is a lower-tier GPU in the benchmark database.
Settings Recommendations
Based on the measured FPS data, the optimal experience for this hardware combination is found at 1920x1080 with Medium settings, which yields an average of 89 FPS with a minimum of 75 FPS and a maximum of 102 FPS. This preset offers a significant performance boost over High (71 FPS) while providing a better visual quality than Low (113 FPS). The Medium preset appears to be the sweet spot, balancing frame rate and graphical fidelity for a smooth gaming experience.
For users who prioritize frame rate above all else, the Low preset at 1080p delivers an excellent 113 FPS, which is ideal for competitive play or for those sensitive to motion. However, the visual downgrade may be noticeable, as Low settings typically reduce texture quality and draw distances. At 2560x1440, the only viable option is the Low preset, which achieves 74 FPS, but even this is borderline for a 1440p experience, and users may prefer to stick with 1080p for consistency.
The Ultra preset at any resolution is not recommended, as it produces an average of 55 FPS at 1080p and drops to 20 FPS at 4K, making it a poor choice for this GPU. Similarly, the High preset at 1440p (47 FPS) and 4K (26 FPS) is below the playable threshold for most users. The data suggests that the system is best utilized at 1080p, where the Medium or High presets provide a good balance of performance and visuals, with the Medium preset offering the most stable frame rates based on the min and max FPS data.
How This Combo Ranks
The Intel Core i5-13400F and NVIDIA GeForce RTX 3050 4 GB combination ranks 3233 out of 3711 tested combos in Palworld, placing it in the bottom 13% of all systems benchmarked. This low ranking underscores the GPU's limitations, as the RTX 3050 4 GB is a low-end card that struggles with the demands of modern open-world games like Palworld. The ranking is a direct result of the measured FPS data, which shows that the system cannot sustain 60 FPS at 1440p on higher settings and falls below 30 FPS at 4K on most presets.
In comparison to other tested combos, this system is clearly positioned in the lower tier of performance. The CPU, while capable, is paired with a GPU that holds it back. The i5-13400F's benchmark scores, such as a Cinebench R23 multi-core score of 22604, indicate a strong processor, but the GPU is the weak link in the chain. This ranking suggests that users with this combo will have to make significant compromises in settings and resolution to achieve playable frame rates, and it is not a configuration suited for high-fidelity gaming.
The data shows that the combo is more capable at 1080p, where it ranks in a better position relative to its own performance, but the overall ranking is dragged down by the poor high-resolution results. For a benchmark database, this rank serves as a warning to potential users that this is a budget-oriented setup that will not excel in graphically intensive titles.
Measured FPS Breakdown
The measured FPS data provides a comprehensive view of the system's performance across three resolutions and four settings. At 1920x1080, the system delivers its best results: Low settings average 113 FPS, Medium settings average 89 FPS with a minimum of 75 and maximum of 102, High settings average 71 FPS, and Ultra settings average 55 FPS. These numbers indicate that 1080p is the native resolution for this combo, with all presets being at least playable.
Moving to 2560x1440, the performance drops significantly: Low settings average 74 FPS, Medium settings average 58 FPS with a minimum of 50 and maximum of 67, High settings average 47 FPS, and Ultra settings average 36 FPS. Only the Low preset maintains a frame rate above 60 FPS, suggesting that 1440p is only viable with reduced graphical fidelity. The Medium preset's minimum of 50 FPS indicates potential stuttering in intensive scenes.
At 3840x2160, the system struggles to remain playable: Low settings average 41 FPS, Medium settings average 32 FPS with a minimum of 28 and maximum of 37, High settings average 26 FPS, and Ultra settings average 20 FPS. None of these results reach the 60 FPS target, and even the Low preset's 41 FPS is below the standard for smooth gameplay. The data clearly shows that 4K is not a feasible option for this hardware combination.
CPU Role
The Intel Core i5-13400F plays a supporting role in this configuration, and the data indicates that it is not the limiting factor in Palworld. With 10 cores and 16 threads, the processor offers substantial multi-threaded capability, as evidenced by its Cinebench R23 multi-core score of 22604 and a Passmark multi-thread score of 25032. These benchmark results show that the CPU is more than capable of handling the game's logic and physics, but its performance is overshadowed by the GPU's constraints.
The CPU's clock speeds, with a base of 2.50 GHz and a boost of 4.60 GHz, provide adequate single-thread performance, which is crucial for game engines. The 3DMark single-thread score of 960 is a respectable figure, but the data shows that the CPU's potential is not fully utilized in this pairing. At 1080p Low, the system hits 113 FPS, which is close to the CPU's maximum frame output for this game, but at higher resolutions, the GPU takes over as the bottleneck.
The nearest rivals to the i5-13400F, such as the AMD Ryzen 9 6900HS and the Intel Core 5 120, have very similar average benchmark scores, with deltas of 0% and -0.3% respectively. This indicates that the CPU's performance is competitive with its peers, but the overall system performance is limited by the GPU. In Palworld, the CPU's role is to maintain a stable frame rate floor, and the data suggests it does so effectively at 1080p, but it cannot overcome the GPU's limitations at higher resolutions.
Hardware Specifications
Intel Core i5-13400F
NVIDIA GeForce RTX 3050 4 GB
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i5-13400F + NVIDIA GeForce RTX 3050 4 GB in Palworld
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 41.0 |
| 3840x2160 | Medium | 32.0 |
| 3840x2160 | High | 26.0 |
| 3840x2160 | Ultra | 20.0 |
| 2560x1440 | Low | 74.0 |
| 2560x1440 | Medium | 58.0 |
| 2560x1440 | High | 47.0 |
| 2560x1440 | Ultra | 36.0 |
| 1920x1080 | Low | 113.0 |
| 1920x1080 | Medium | 89.0 |
| 1920x1080 | High | 71.0 |
| 1920x1080 | Ultra | 55.0 |
Palworld with RTX 3050 4 GB + Other CPUs
See how Palworld performs with the same GPU but different processors.
Other Games with ii5-13400F + RTX 3050 4 GB
Explore FPS benchmarks for other games using this same hardware combination.