Palworld
This combination offers playable performance with an average of 53 FPS, though you may want to lower settings for smoother gameplay.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 17 | 24 | 35 | 42 |
| 1440p QHD | 34 | 41 | 60 | 73 |
| 1080p Full HD | 53 | 70 | 88 | 106 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Palworld with Intel Core i5-12400F + NVIDIA GeForce RTX 3050 4 GB, In-Depth Analysis
Palworld presents a demanding open-world workload, and this pairing of the Intel Core i5-12400F with the NVIDIA GeForce RTX 3050 4 GB produces a specific set of trade-offs across resolutions and presets. The measured data indicates that this combination is firmly positioned in the lower tier of tested configurations, ranking 1554 out of 1718 combos in this title. The experience is heavily dependent on the user's willingness to adjust settings, as the gap between the lowest and highest presets is substantial.
Settings Recommendations
The data clearly shows that the "Ultra" preset is not a viable option for this hardware in Palworld. At 1920x1080, the Ultra preset delivers an average of 52.5 FPS, which is playable but leaves little headroom for the demanding open-world moments typical of the survival genre. The situation deteriorates rapidly at higher resolutions, with Ultra dropping to 33.7 FPS at 2560x1440 and a stutter-prone 16.8 FPS at 3840x2160. These figures suggest that the combination of the 4 GB VRAM buffer and the GPU's compute capabilities are insufficient for the highest fidelity settings.
For the best balance of visual quality and performance, the "High" preset at 1920x1080 is the most sensible recommendation. It achieves an average of 69.6 FPS, which is a significant improvement over the Ultra preset and provides a smoother experience. While the "Medium" preset at 1080p offers a higher average of 88.1 FPS, the jump from Medium to High is visually noticeable in a game with large, detailed environments, and the 1080p High preset remains comfortably within a playable range. Pushing to 2560x1440 with High settings yields 41.4 FPS, which is a borderline experience for a game that benefits from stable frame pacing; therefore, 1080p High is the sweet spot.
The "Low" preset, while delivering high frame rates of 106 FPS at 1080p, sacrifices too much visual fidelity for the modest gains in smoothness that this hardware provides. The data suggests that the 1080p High preset is the recommended starting point, offering a 32.5% performance increase over Ultra while maintaining a significantly better visual presentation than Low.
How This Combo Ranks
Benchmark results place this configuration at rank 1554 out of 1718 tested combos for Palworld, putting it in the bottom 10% of all systems. This low ranking is not surprising given the GPU's position in the market; it sits at the 50th percentile among all GPUs, indicating it is an entry-level part. The CPU, however, is a stronger component, performing at the 77th percentile among all CPUs. This disparity is critical to understanding the system's behavior.
The Core i5-12400F's performance is closely matched by its nearest rivals in general benchmarks. It is within 0.1% of the Intel Core i7-8700K, 0.3% of the Intel Core i5-1335U, and 0.7% ahead of the AMD Ryzen 5 7533HS. This suggests that the processor is not the primary bottleneck in most scenarios; it has ample headroom to feed the GPU. The system's overall ranking in Palworld is thus almost entirely dictated by the RTX 3050 4 GB's limitations. The data indicates a system that is held back by its graphics subsystem, a conclusion reinforced by the FPS scaling at different resolutions.
GPU Role
The NVIDIA GeForce RTX 3050 4 GB is the defining component in this analysis, and its specifications explain the observed performance ceiling. Its memory configuration is a critical constraint: 4 GB of GDDR6 on a 128-bit bus provides 192.0 GB/s of bandwidth. Palworld's large, streaming world environments are likely to be sensitive to this limited VRAM capacity, which can cause texture thrashing and frame drops when the buffer is exceeded.
The GPU's clock speeds are also relevant. With a base clock of 1545 MHz and a boost clock of 1740 MHz, the card's compute throughput is modest. It offers 7.127 TFLOPS of FP32 performance. The data shows that this combination of limited VRAM and compute power is insufficient to handle the "Ultra" preset at any resolution. Even at 1080p, the Ultra preset scores 52.5 FPS, which is only 75% of the High preset's performance. The GPU is clearly the limiting factor, as the CPU's strong relative standing (77th percentile) means it is not starved for data.
The performance cliff between High and Ultra presets points directly to the GPU's resource limits. The 4 GB frame buffer is likely saturated by the higher-resolution textures and increased draw distances of the Ultra preset, causing the average FPS to plummet. The GPU's 128-bit memory interface further compounds this issue, as it limits the speed at which data can be moved in and out of the VRAM.
Measured FPS Breakdown
The measured FPS data provides a clear picture of the system's capabilities at each resolution and preset level. At 1920x1080, the system performs best. The "Low" preset hits an average of 106 FPS, which is the only configuration in the entire dataset to break the 100 FPS barrier. The "Medium" preset delivers 88.1 FPS, and "High" follows at 69.6 FPS. The "Ultra" preset is the outlier, falling to 52.5 FPS.
Moving to 2560x1440, the impact of the GPU's limitations becomes more pronounced. The "Low" preset remains playable at 73.3 FPS, but the "Medium" preset drops to 59.5 FPS. The "High" preset falls to 41.4 FPS, which is below the ideal threshold for a smooth experience in a fast-paced game. The "Ultra" preset at 1440p is not a viable option, with an average of 33.7 FPS.
At 3840x2160, the system is overwhelmed. The "Low" preset is the only one that approaches playability, scoring an average of 41.8 FPS. The "Medium" preset drops to 34.9 FPS, and "High" falls to 24 FPS. The "Ultra" preset is effectively a slideshow at 16.8 FPS. These numbers confirm that 4K gaming is out of reach for this combo, regardless of the settings used.
Resolution Scaling
The data reveals a steep performance penalty as resolution increases, which is a hallmark of a GPU-bound system. From 1080p to 1440p, the "High" preset drops from 69.6 FPS to 41.4 FPS, a reduction of 40.5%. The "Low" preset shows a similar trend, falling from 106 FPS to 73.3 FPS, a 30.8% decrease. This scaling is more aggressive than what would be expected from a purely CPU-limited scenario, confirming the GPU is the bottleneck.
The transition from 1440p to 4K is even more punishing. The "High" preset falls from 41.4 FPS to 24 FPS, a 42% decrease. The "Medium" preset drops from 59.5 FPS to 34.9 FPS, a 41.3% decrease. This consistent pattern of roughly 40% performance losses with each resolution tier indicates that the GPU's pixel throughput and memory bandwidth are being saturated.
The scaling behavior has a clear implication: the limiting component is the graphics card. The CPU, with its 6 cores and 12 threads, is capable of generating frames faster than the GPU can render them at higher resolutions. If the processor were the bottleneck, the FPS would remain relatively flat across resolutions. Instead, the data shows a linear decline that corresponds directly to the increasing pixel count. This indicates that users with this configuration should prioritize resolution reduction over other settings adjustments to achieve a playable frame rate in Palworld.
Hardware Specifications
Intel Core i5-12400F
NVIDIA GeForce RTX 3050 4 GB
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i5-12400F + NVIDIA GeForce RTX 3050 4 GB in Palworld
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 41.8 |
| 3840x2160 | Medium | 34.9 |
| 3840x2160 | High | 24.0 |
| 3840x2160 | Ultra | 16.8 |
| 2560x1440 | Low | 73.3 |
| 2560x1440 | Medium | 59.5 |
| 2560x1440 | High | 41.4 |
| 2560x1440 | Ultra | 33.7 |
| 1920x1080 | Low | 106.0 |
| 1920x1080 | Medium | 88.1 |
| 1920x1080 | High | 69.6 |
| 1920x1080 | Ultra | 52.5 |
Palworld with RTX 3050 4 GB + Other CPUs
See how Palworld performs with the same GPU but different processors.
Other Games with ii5-12400F + RTX 3050 4 GB
Explore FPS benchmarks for other games using this same hardware combination.