Palworld

Palworld

AVERAGE FPS
53
playable

This combination offers playable performance with an average of 53 FPS, though you may want to lower settings for smoother gameplay.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 18 26 35 41
1440p QHD 34 42 57 71
1080p Full HD 53 64 85 108

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 41
3840x2160 Medium 35
3840x2160 High 26
3840x2160 Ultra 18
2560x1440 Low 71
2560x1440 Medium 57
2560x1440 High 42
2560x1440 Ultra 34
1920x1080 Low 108
1920x1080 Medium 85
1920x1080 High 64
1920x1080 Ultra 53

Palworld with Intel Core i5-10400F + NVIDIA GeForce RTX 3050 4 GB, In-Depth Analysis

Palworld places the Intel Core i5-10400F in a supporting role, where its six cores and twelve threads are sufficient to feed the GPU without becoming the primary constraint in most scenarios. The processor’s 2.90 GHz base clock and 4.30 GHz boost clock provide adequate single-thread performance for game logic, while its 12 MB of shared L3 cache helps with asset streaming in the open-world survival genre. Benchmark data shows the CPU sits at the 73rd percentile among all processors, with an average benchmark score of 14168, placing it within 0.4% of the AMD EPYC 7552 and 1.1% behind the Intel Core i5-8500. This mid-range positioning means the processor is never the star of the show in Palworld, but it also does not drag down the experience; the data indicates that at 1080p, the GPU is already the limiting factor even at lower settings, which suggests the CPU has headroom to spare.

The NVIDIA GeForce RTX 3050 4 GB is the decisive component in this pairing, and its modest specifications directly shape the game’s performance ceiling. With only 4 GB of GDDR6 memory on a 128-bit bus delivering 192.0 GB/s of bandwidth, the card is constrained by both capacity and throughput. Its 1545 MHz base clock and 1740 MHz boost clock, combined with 2048 shading units and 32 ROPs, produce 7.127 TFLOPS of FP32 compute, but the 4 GB frame buffer is the critical weakness in a game like Palworld that features large, detailed environments. The GPU sits at the 50th percentile among all graphics cards, and its end-of-life production status suggests it was never intended for high-end workloads. In practice, the 4 GB VRAM becomes a bottleneck at higher resolutions and settings, as evidenced by the steep FPS drops when moving from 1080p to 4K.

Resolution scaling reveals a classic GPU-bound scenario, with the RTX 3050 4 GB struggling to maintain playable frame rates as pixel count increases. At 1080p with Low settings, the combo achieves 108.3 FPS, which drops to 70.5 FPS at 1440p and further to 41.4 FPS at 4K—a 62% reduction from 1080p to 4K. This pattern holds across all settings presets; for instance, High settings produce 64.4 FPS at 1080p, 41.9 FPS at 1440p, and 26.4 FPS at 4K. The scaling is not linear but rather accelerates the penalty at higher resolutions, which is characteristic of a GPU that is running out of memory bandwidth and capacity. The CPU’s relative stability across resolutions—its benchmark scores do not change with display output—confirms that the frame rate drops are almost entirely attributable to the graphics card’s limitations, not the processor.

CPU Role

The Intel Core i5-10400F is a six-core, twelve-thread processor based on the Comet Lake architecture, built on Intel’s 14 nm process node. Its base clock of 2.90 GHz and boost clock of 4.30 GHz provide a solid foundation for gaming, and its 12 MB of shared L3 cache is adequate for Palworld’s world streaming. The CPU’s benchmark results show a single-thread score of 1453 in Cinebench R23, which is modest but sufficient for the game’s main thread, and a multi-core score of 10297, indicating that it can handle background tasks without issue. In the context of Palworld, the CPU’s role is to maintain a stable frame delivery pipeline, and the data suggests it does so effectively; at 1080p Low, the system hits 108.3 FPS, which is well above the 60 FPS target, and even at 1080p Ultra, it manages 52.6 FPS. The processor’s 73rd percentile ranking among all CPUs, with an average score of 14168, places it in the mid-range tier, and its nearest rivals—the AMD EPYC 7552 and AMD Ryzen 3 7320C—are within 1.2% of its performance, indicating that the i5-10400F is neither a standout nor a weak link. The 65 W TDP and dual-channel DDR4 memory support with 42.7 GB/s bandwidth are standard for this class, and the CPU’s PCIe Gen 3, 16-lane interface does not bottleneck the GPU. Overall, the CPU role is to stay out of the way, and benchmark results confirm it does, with the GPU being the clear performance limiter in all tested configurations.

GPU Role

The NVIDIA GeForce RTX 3050 4 GB is the dominant factor in this combo’s Palworld performance, and its 4 GB VRAM is the single most restrictive element. The card’s 128-bit memory bus and 192.0 GB/s bandwidth are insufficient for high-resolution textures, leading to severe frame rate penalties as settings increase. The GPU’s 2048 shading units and 32 ROPs, running at 1545 MHz base and 1740 MHz boost, deliver 7.127 TFLOPS of FP32 performance, which is respectable for 1080p gaming but falls apart at higher resolutions. The 4 GB frame buffer is the critical weakness: at 1080p Ultra, the card manages 52.6 FPS, but at 4K Ultra, it drops to 17.9 FPS—a 66% reduction. This is not a compute limitation but a memory capacity issue, as the card cannot hold the necessary textures and geometry for Palworld’s open world at high resolutions. The GPU’s 50th percentile ranking among all graphics cards places it at the median, and its end-of-life status indicates that it was a budget-oriented product at launch (with a launch MSRP of 199 USD). The 90 W TDP and 250 W suggested PSU are modest, but the card’s performance is capped by its memory subsystem. The data clearly shows that the RTX 3050 4 GB is the bottleneck: at 1080p Low, the system achieves 108.3 FPS, suggesting the CPU can handle more, but the GPU cannot push higher frame rates at higher settings without the frame buffer becoming a limiting factor.

Resolution Scaling

The FPS drops from 1080p to 4K are steep and consistent, confirming that the GPU is the limiting component. At Low settings, the combo delivers 108.3 FPS at 1080p, 70.5 FPS at 1440p, and 41.4 FPS at 4K—a 62% drop from 1080p to 4K. At Medium settings, the numbers are 84.5 FPS, 57.2 FPS, and 34.6 FPS, respectively, showing a 59% reduction. High settings produce 64.4 FPS, 41.9 FPS, and 26.4 FPS, a 59% drop, while Ultra settings yield 52.6 FPS, 33.5 FPS, and 17.9 FPS, a 66% reduction. The scaling pattern is not uniform; the penalty from 1440p to 4K is consistently larger than from 1080p to 1440p, which is typical of a GPU running out of memory bandwidth. For example, at Low settings, the drop from 1080p to 1440p is 37.8 FPS, while the drop from 1440p to 4K is 29.1 FPS—the latter is smaller in absolute terms but larger as a percentage of the remaining frame rate. This indicates that the card is struggling more at 4K, where the 4 GB VRAM is completely overwhelmed. The CPU’s performance is resolution-independent, so the frame rate scaling is entirely attributable to the RTX 3050 4 GB’s memory and compute limits. The data shows that 1080p is the only resolution where this combo can consistently exceed 60 FPS, and even then, only at Low and Medium settings.

FAQ

Q: What is the best resolution for this combo in Palworld?

A: 1920x1080 is the only resolution where the system can maintain playable frame rates across all settings, with Low at 108.3 FPS and Medium at 84.5 FPS. At 2560x1440, even Low settings only yield 70.5 FPS, and at 3840x2160, all settings fall below 41.4 FPS.

Q: How does the CPU compare to its nearest rivals?

A: The Intel Core i5-10400F has an average benchmark score of 14168, which is 0.4% higher than the AMD EPYC 7552 (14115) and 1.1% lower than the Intel Core i5-8500 (14332). It ranks in the 73rd percentile among all CPUs.

Q: Is the GPU the bottleneck in this system?

A: Yes, the benchmark data shows that the GPU is the limiting factor. At 1080p Low, the system hits 108.3 FPS, but the frame rate drops by 62% at 4K, indicating that the RTX 3050 4 GB’s 4 GB VRAM and 192.0 GB/s bandwidth cannot handle higher resolutions.

Q: What is the performance difference between Low and Ultra settings at 1080p?

A: At 1080p, Low settings deliver 108.3 FPS, while Ultra settings deliver 52.6 FPS—a 51% reduction. This shows that the Ultra preset is too demanding for the 4 GB frame buffer, despite the CPU having sufficient headroom.

Q: How does the combo rank among all tested combinations?

A: This combo ranks 1570 out of 1718 tested combinations in Palworld, placing it in the bottom 9% of all tested systems. This low rank is primarily due to the GPU’s 4 GB memory limitation.

Q: Can this system run Palworld at 1440p?

A: Yes, but with significant compromises. At 1440p, Low settings achieve 70.5 FPS, Medium reaches 57.2 FPS, and High drops to 41.9 FPS. Only Low settings provide a consistently smooth experience above 60 FPS.

How This Combo Ranks

The Intel Core i5-10400F and NVIDIA GeForce RTX 3050 4 GB combination ranks 1570 out of 1718 tested combos in Palworld, placing it in the bottom 9% of all systems. This low ranking is almost entirely attributable to the GPU, which sits at the 50th percentile among all graphics cards, while the CPU ranks at the 73rd percentile. The disparity in component performance is stark: the CPU’s average benchmark score of 14168 is competitive with mid-range processors, but the GPU’s lack of benchmark scores and end-of-life status indicate a weaker position. The combo’s rank reflects the fact that Palworld is heavily GPU-bound, and the RTX 3050 4 GB’s 4 GB VRAM is insufficient for the game’s open-world rendering demands. When compared to other tested combos, this system is not competitive at 4K, where even Low settings produce only 41.4 FPS, and it only becomes viable at 1080p. The data shows that this combo is positioned for 1080p gaming at Low to Medium settings, but it cannot deliver the high frame rates or visual fidelity that higher-ranked systems achieve. The 1570th rank out of 1718 is a clear signal that this pairing is below average for Palworld, with the GPU holding back the CPU’s potential.

Measured FPS Breakdown

The measured FPS data provides a complete picture of this combo’s performance across three resolutions and four settings presets. At 1920x1080, the system delivers 108.3 FPS on Low, 84.5 FPS on Medium, 64.4 FPS on High, and 52.6 FPS on Ultra. These numbers show that 1080p is the sweet spot, with Low and Medium both exceeding 60 FPS, while High is just above 60 FPS and Ultra falls below. Moving to 2560x1440, the performance drops significantly: Low yields 70.5 FPS, Medium 57.2 FPS, High 41.9 FPS, and Ultra 33.5 FPS. Only Low settings maintain a 60 FPS average at 1440p, and the Ultra preset is barely playable. At 3840x2160, the system struggles across the board: Low produces 41.4 FPS, Medium 34.6 FPS, High 26.4 FPS, and Ultra 17.9 FPS. None of the 4K settings reach 45 FPS, making 4K gaming impractical with this hardware. The data also reveals a consistent pattern: the gap between Low and Ultra widens as resolution increases. At 1080p, Low is 55.7 FPS faster than Ultra (108.3 vs. 52.6), while at 4K, the gap narrows to 23.5 FPS (41.4 vs. 17.9). This indicates that at higher resolutions, the GPU’s memory bandwidth becomes the limiting factor, and settings adjustments have diminishing returns.

Settings Recommendations

For the best experience with this combo, the data clearly points to 1080p as the target resolution, with settings chosen to balance frame rate and visual quality. At 1920x1080, the Medium preset delivers 84.5 FPS, which is well above the 60 FPS threshold and offers a significant visual improvement over Low (108.3 FPS). The High preset at 64.4 FPS is also viable, but it drops closer to the 60 FPS line, and any complex scenes could cause dips below that threshold. The Ultra preset at 52.6 FPS is not recommended for consistent gameplay, as it sacrifices too much frame rate for marginal visual gains. For players who prioritize smoothness over visuals, the Low preset at 1080p provides the highest frame rate at 108.3 FPS, but the Medium preset offers a better balance. At 2560x1440, the only viable option is Low settings at 70.5 FPS, but this is a marginal improvement over 1080p Medium in terms of resolution, and the visual quality reduction is noticeable. At 3840x2160, none of the settings are recommended, as even Low (41.4 FPS) fails to reach 60 FPS, and the experience is likely to be stuttery. The data suggests that the optimal configuration for this hardware is 1080p with Medium settings, which provides a 84.5 FPS average, or 1080p High at 64.4 FPS for those who prefer higher detail. The Ultra preset should be avoided at all resolutions, as the 4 GB VRAM limitation causes significant frame rate drops that outweigh any visual benefits.

Hardware Specifications

Intel Core i5-10400F

Cores / Threads 6 / 12
Base Clock 2900 MHz
Boost Clock 4300 MHz
TDP 65W
Socket Intel Socket 1200
View Full CPU Details →

NVIDIA GeForce RTX 3050 4 GB

VRAM 4 GB GDDR6
Base Clock —
Boost Clock 1740 MHz MHz
TDP 90 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core i5-10400F + NVIDIA GeForce RTX 3050 4 GB in Palworld

Resolution Settings Avg FPS
3840x2160 Low 41.4
3840x2160 Medium 34.6
3840x2160 High 26.4
3840x2160 Ultra 17.9
2560x1440 Low 70.5
2560x1440 Medium 57.2
2560x1440 High 41.9
2560x1440 Ultra 33.5
1920x1080 Low 108.3
1920x1080 Medium 84.5
1920x1080 High 64.4
1920x1080 Ultra 52.6

Palworld with RTX 3050 4 GB + Other CPUs

See how Palworld performs with the same GPU but different processors.

Other Games with ii5-10400F + RTX 3050 4 GB

Explore FPS benchmarks for other games using this same hardware combination.