Palworld

The Intel Core i5-10400F paired with the AMD Radeon RX 6600 ranks in the 1421st position out of 1718 tested combinations for Palworld, placing it near the bottom quartile of systems evaluated for this title. This ranking reflects a pairing that can run the game, but with significant compromises required at higher resolutions and quality settings. The data shows a system that is fundamentally capable of delivering playable frame rates, yet it clearly sits below the curve of more powerful contemporary hardware, making it a mid-range option that leans on its strengths at 1080p.

How This Combo Ranks

The combo’s rank of 1421 out of 1718 places it in the lower 17% of tested configurations, indicating that while it is not a bottom-tier setup, it is decisively outclassed by the majority of systems in the database. This position is consistent with the individual component standings: the CPU sits at the 73rd percentile against all tested processors, while the GPU holds the 69th percentile against all tested graphics cards. Neither part is a standout, and the pairing does not boost either component’s standing.

Benchmark results for the CPU show it trading blows with a narrow band of rivals, with its average benchmark score of 14168 sitting just 0.4% above the AMD EPYC 7552 and 0.8% below the AMD Ryzen 3 7320C. The gap to the Intel Core i5-8500 is 1.1%, and the AMD Ryzen Embedded V2546 leads by 1.2%. These are marginal differences, meaning the processor’s performance is highly competitive within its immediate tier, but it lacks the headroom to push the combo up the rankings. The GPU follows a similar pattern, with its average benchmark score of 25235 placing it statistically tied with the AMD Radeon 890M, which has a deltaPct of 0%, and within 0.5% of the NVIDIA GeForce RTX 3060 Ti.

In Palworld specifically, the ranking suggests that the system’s performance is dictated more by the GPU than the CPU, as the game’s open-world survival mechanics tend to stress graphical throughput heavily. The combo’s position relative to others in the database indicates that users can expect moderate performance, but the system will struggle to maintain high frame rates when settings are pushed to their limits. The data implies this is a pairing for gamers who prioritize accessibility over maximum fidelity, as the hardware’s collective output is sufficient for smooth play only at lower resolutions and settings.

GPU Role

The AMD Radeon RX 6600 is built on the RDNA 2.0 architecture with a 7 nm process, housing 1792 shading units, 112 texture mapping units, and 64 raster operation units. Its memory configuration includes 8 GB of GDDR6 on a 128-bit bus, providing a bandwidth of 224.0 GB/s. The GPU’s clock speeds are a defining feature: a base clock of 1626 MHz, a game clock of 2044 MHz, and a boost clock of 2491 MHz, with memory running at 1750 MHz (14 Gbps effective). These specifications dictate how the card handles Palworld’s demanding environments, where the combination of large open areas and numerous on-screen entities can tax both fill rate and memory throughput.

In this game, the GPU’s role is critical, as the measured FPS data shows a clear correlation between resolution, settings, and performance. At 1080p, the card delivers strong results, with an average of 138.5 FPS on Low settings, which drops to 86.2 FPS on High. However, at 4K with Ultra settings, the average falls to 24.6 FPS, illustrating the card’s limitations at higher pixel counts. The 8 GB VRAM capacity is sufficient for 1080p and 1440p, but at 4K, the memory bandwidth of 224.0 GB/s becomes a bottleneck, as the card struggles to sustain frame rates above the 30 FPS threshold even on Low settings, where it averages 53.6 FPS.

The GPU’s compute capabilities, with an FP32 throughput of 8.928 TFLOPS, support its performance in Palworld, but the card’s 28 ray accelerators and DirectX 12 Ultimate support are underutilized in this title, which does not rely heavily on ray tracing. The data suggests that the RX 6600 is best suited for 1080p gaming, where it can leverage its boost clock to maintain high frame rates, but it lacks the raw power to excel at 4K, where the pixel rate of 159.4 GPixel/s and texture rate of 279.0 GTexel/s are insufficient to keep pace with the game’s visual demands.

Resolution Scaling

The measured FPS data reveals a steep performance drop as resolution increases, highlighting the GPU as the primary limiting component. From 1080p to 4K, the average frame rate at High settings falls from 86.2 FPS to 29.7 FPS, a reduction of 56.5 FPS, or roughly a 65% decline. This scaling pattern is typical of a system where the graphics card is saturated at higher resolutions, as the CPU’s 6-core, 12-thread configuration with a boost clock of 4.30 GHz is sufficient to feed the GPU at 1080p but becomes less relevant as the pixel count rises.

At Low settings, the drop from 1080p to 4K is from 138.5 FPS to 53.6 FPS, a 61% decrease, while at Medium settings, the decline is from 114.6 FPS to 41.7 FPS, a 64% reduction. The Ultra preset shows the most severe scaling, with frame rates falling from 64.1 FPS at 1080p to 24.6 FPS at 4K, a 62% drop. These consistent percentages across settings indicate that the resolution scaling is primarily GPU-bound, as the CPU’s performance remains relatively constant regardless of graphical load.

The data shows that the limiting component shifts depending on the resolution. At 1080p, the system appears balanced, with the CPU capable of driving the GPU to its limits, as evidenced by the high frame rates on Low and Medium settings. However, at 1440p and 4K, the GPU’s memory bandwidth and compute throughput become the bottleneck, as the frame rates drop below playable thresholds on higher settings. This suggests that users seeking higher resolutions would need to significantly reduce settings to maintain smooth gameplay, as the GPU’s 8 GB VRAM and 128-bit bus are not designed for high-resolution gaming.

Measured FPS Breakdown

At 1920x1080, the Intel Core i5-10400F and Radeon RX 6600 deliver their strongest performance, with an average of 138.5 FPS on Low settings. This drops to 114.6 FPS on Medium, 86.2 FPS on High, and 64.1 FPS on Ultra, showing a clear progression where each quality tier reduces frame rates by roughly 20-25%. These numbers indicate that the system is well-suited for 1080p gaming, as even the Ultra preset maintains a frame rate above 60 FPS, ensuring smooth gameplay for most users.

Moving to 2560x1440, the performance begins to show strain, with Low settings averaging 89.6 FPS and Medium at 72 FPS. High settings drop to 60.1 FPS, which is just above the playable threshold, while Ultra falls to 40.6 FPS, making it less ideal for fast-paced action. The transition from 1080p to 1440p results in a 35% decrease in frame rates across all settings, indicating that the GPU is being pushed harder, but the system remains viable for competitive play on lower presets.

At 3840x2160, the limitations of the RX 6600 become apparent, as even Low settings only average 53.6 FPS, which is a significant drop from the 138.5 FPS at 1080p. Medium settings average 41.7 FPS, High at 29.7 FPS, and Ultra at 24.6 FPS, all of which are below the 60 FPS standard for smooth gameplay. The data shows that 4K gaming is not practical with this combo, as users would need to accept sub-30 FPS performance on the highest settings or sacrifice visual quality to achieve playable frame rates. Overall, the measured FPS breakdown underscores the system’s strengths at 1080p and its weaknesses at higher resolutions, with the GPU acting as the primary determinant of performance.

FAQ

Q: What is the best resolution for this combo in Palworld?

A: The data shows that 1920x1080 is the optimal resolution, with average frame rates ranging from 64.1 FPS on Ultra to 138.5 FPS on Low, ensuring smooth gameplay across all settings.

Q: How does the CPU compare to its nearest rivals?

A: The Intel Core i5-10400F has an average benchmark score of 14168, which is 0.4% higher than the AMD EPYC 7552 and 0.8% lower than the AMD Ryzen 3 7320C, indicating near-identical performance within its tier.

Q: Can this system handle 4K gaming in Palworld?

A: No, at 3840x2160, the average frame rates are 29.7 FPS on High and 24.6 FPS on Ultra, which are below playable thresholds, though Low settings can achieve 53.6 FPS.

Q: What is the GPU’s memory configuration?

A: The AMD Radeon RX 6600 features 8 GB of GDDR6 memory on a 128-bit bus with a bandwidth of 224.0 GB/s, which is sufficient for 1080p but limits 4K performance.

Q: How does the GPU rank against other graphics cards?

A: The GPU holds the 69th percentile against all tested GPUs, with an average benchmark score of 25235, placing it statistically tied with the AMD Radeon 890M and within 0.5% of the NVIDIA GeForce RTX 3060 Ti.

Q: What settings should be used for competitive play?

A: For high frame rates, Low settings at 1080p provide 138.5 FPS, while Medium settings at 1440p offer 72 FPS, both of which are suitable for competitive play, though 4K should be avoided.