Palworld

Palworld with the Intel Core i3-12100F and NVIDIA GeForce RTX 5070 Ti lands at rank 142 out of 1718 tested combos, placing it in the top 8% of all configurations benchmarked for this title. This is a strong result, driven almost entirely by the graphics card, which sits at the 87th percentile among all GPUs and delivers frame rates that range from playable at 4K Ultra to exceptionally high at 1080p Low. The data shows a combo that is clearly GPU-bound in most scenarios, with the CPU providing just enough throughput to keep the pipeline fed at lower resolutions.

How This Combo Ranks

The comboRankInGame of 142 out of 1718 tested combinations is a decisive indicator of high-end performance. This placement puts the system ahead of roughly 92% of all other CPU-GPU pairings tested in Palworld. The ranking reflects the synergy between the two components: the RTX 5070 Ti's immense compute power is the primary driver, while the Core i3-12100F's four Performance cores, clocked up to 4.30 GHz, prevent significant bottlenecking in this particular workload. While the CPU is not a top-tier part by any means—it sits at the 72nd percentile among all CPUs—the game's engine scales well with the GPU, allowing this pairing to achieve a rank far higher than the CPU's standalone standing would suggest. The gap between this combo and the top of the list is likely defined by systems with flagship CPUs that can push even higher frame rates at 1080p, but for the vast majority of users, the performance on offer is substantial.

GPU Role

The NVIDIA GeForce RTX 5070 Ti is the undisputed engine of this combo's performance. Its 16 GB of GDDR7 memory on a 256-bit bus provides 896.0 GB/s of bandwidth, which is more than sufficient for Palworld's large, streaming open world. The card's 8960 shading units and boost clock of 2452 MHz deliver a raw FP32 throughput of 43.94 TFLOPS, a figure that directly translates into the high pixel fill rates observed in the benchmarks. The GPU's architecture, Blackwell 2.0, is built on a 5 nm process and is designed to handle modern DirectX 12 Ultimate workloads, which Palworld utilizes. In practical terms, the GPU is the component that determines the frame rate ceiling in almost every measured configuration. For instance, the drop from 190.3 FPS at 1080p High to 122.9 FPS at 1440p High shows the GPU's scaling under increased load, demonstrating that it is the limiting factor as resolution climbs.

Resolution Scaling

The benchmark data reveals a predictable yet important scaling pattern. Moving from 1920x1080 to 2560x1440 at High settings, the average frame rate drops from 190.3 FPS to 122.9 FPS, a 35% reduction. This is a significant hit, indicating that the GPU is being tasked much harder at 1440p. The scaling continues to 3840x2160, where the High preset yields just 70.1 FPS, a further 43% drop from the 1440p result. This steep decline is a clear sign that the RTX 5070 Ti is the primary bottleneck at higher resolutions; the CPU's workload does not increase proportionally with resolution, so the entire performance penalty is borne by the GPU. At 4K Low, the system still manages 111.3 FPS, showing that even when the graphical load is light, the GPU's raw throughput is enough to maintain high frame rates. The data suggests that for competitive or high-refresh-rate play, 1080p is the sweet spot, while 4K is reserved for visually demanding single-player experiences where 60+ FPS is achievable on High settings.

Measured FPS Breakdown

At 1920x1080, the Core i3-12100F and RTX 5070 Ti combo delivers exceptional performance across the board. The Low preset produces an average of 307.3 FPS, which reflects the GPU's ability to render simple scenes at extreme speed. Moving to Medium yields 249.6 FPS, and High settings drop to 190.3 FPS. Even the Ultra preset, which adds significant visual complexity, maintains a high 143.5 FPS average. At 2560x1440, the frame rates remain highly playable. Low settings produce 200.3 FPS, Medium drops to 162.1 FPS, and High settles at 122.9 FPS. The Ultra preset at 1440p falls to 94.1 FPS, which is still smooth for most displays. The 3840x2160 results show the GPU's limits. Low settings hit 111.3 FPS, Medium drops to 91.5 FPS, and High manages 70.1 FPS. The Ultra preset at 4K is the only configuration that dips below 60 FPS, averaging 53.1 FPS, which is a borderline playable but not ideal experience for a fast-paced survival game.

Settings Recommendations

Based on the measured rows, the High preset at 2560x1440 offers the best balance of visual fidelity and performance, delivering 122.9 FPS. This is a significant jump from the 94.1 FPS of Ultra at the same resolution, and the visual difference between High and Ultra is often less pronounced than the performance cost. For users with 1080p displays, the High preset is also the recommended choice, as the 190.3 FPS average provides a massive headroom for refresh rates up to 165Hz or 240Hz. At 4K, the High preset is the best option for a consistent experience, as the 70.1 FPS average is comfortably above the 60 FPS threshold for most monitors. The Low preset is viable for competitive play at 1080p, where the 307.3 FPS average ensures maximum responsiveness, but the visual compromise is substantial. The Ultra preset is not recommended for any resolution due to its steep performance penalty relative to High.

FAQ

Q: What is the best resolution to play Palworld at with this combo?

A: The data indicates that 2560x1440 on High settings is the sweet spot, providing 122.9 FPS. This resolution offers a significant visual upgrade over 1080p while still maintaining frame rates high enough for smooth gameplay.

Q: Can this system handle 4K gaming?

A: Yes, but with compromises. At 4K High settings, the combo averages 70.1 FPS, which is playable. However, the Ultra preset drops to 53.1 FPS, which may be below the target for many users.

Q: How much faster is 1080p compared to 4K?

A: At High settings, the 1080p average of 190.3 FPS is roughly 2.7 times faster than the 4K average of 70.1 FPS. This highlights how resolution scaling impacts the GPU workload.

Q: Is the CPU or GPU the limiting factor?

A: The data strongly suggests the GPU is the limiting factor, especially at 1440p and 4K. The frame rate drops significantly with higher resolutions, which is a classic sign of GPU bottlenecking. At 1080p Low, the 307.3 FPS result shows the CPU is capable of feeding the GPU effectively.

Q: What is the lowest frame rate recorded?

A: The lowest average frame rate in the measured data is 53.1 FPS, which occurs at 3840x2160 with the Ultra preset. This is the only configuration that falls below the 60 FPS standard.

Q: Is the Ultra preset worth using?

A: Generally, no. Compared to High, Ultra reduces performance substantially at all resolutions. For example, at 1440p, it drops from 122.9 FPS to 94.1 FPS. The visual improvement from High to Ultra is typically marginal in this title.

CPU Role

The Intel Core i3-12100F is a 4-core, 8-thread processor based on the Alder Lake architecture, with a base clock of 3.30 GHz and a boost clock of 4.30 GHz. It features 12 MB of shared L3 cache and supports DDR4 and DDR5 memory. In Palworld, the CPU's role is to handle game logic, physics, and AI, which are often single-threaded or lightly threaded tasks. The CPU's single-thread performance is strong, as evidenced by its 3DMark single-thread score of 893 and Cinebench R23 single-core score of 1681, which allows it to keep up with the GPU's frame generation at lower resolutions. However, the CPU's multi-threaded capabilities are limited by its 4-core design. Its Cinebench R23 multi-core score of 11912 is modest compared to high-end CPUs, but the benchmark results show this does not heavily impact Palworld's performance. The fact that the combo achieves 307.3 FPS at 1080p Low indicates that the CPU is not a bottleneck in this scenario. The CPU's performance is comparable to the Intel Core i7-7700K, which is 1.8% faster in average benchmark score, and the Intel Core i3-10105, which is 0.6% slower. This places the i3-12100F in a solid mid-range position for gaming, but it is the GPU that carries the combo to its top-tier rank.