Palworld

Palworld on the AMD Ryzen 7 7800X3D and NVIDIA GeForce RTX 4080 combo delivers a performance profile that is heavily dictated by resolution, with the 4080’s immense rasterization power providing headroom that is progressively constrained as pixel count rises. The data indicates this pairing is exceptionally strong at 1080p and 1440p, but 4K Ultra demands compromises that reveal the GPU’s limits. This analysis breaks down the measured results, contextualizes them against the combo’s rank, and provides actionable settings guidance based strictly on the observed frame rates.

Resolution Scaling

The frame rate drop from 1080p to 4K is steep, showing a classic GPU-bound scaling curve. At High settings, the average FPS falls from 198 at 1920x1080 to 130 at 2560x1440, a reduction of 68 FPS (roughly 34%). Moving to 3840x2160, the average drops further to 72 FPS, which is just 36% of the 1080p figure. This scaling pattern indicates that at 1080p, the RTX 4080 is so dominant that other factors (likely CPU or engine limits) cap performance; the jump to 1440p still leaves massive headroom, but 4K begins to stress the GPU’s 16 GB VRAM and 716.8 GB/s bandwidth.

The Low preset demonstrates even more extreme scaling. At 1080p Low, the combo achieves 318 FPS average, which is exceptional. At 1440p Low, it still manages 209 FPS, but at 4K Low, the average collapses to 116 FPS. This 202 FPS gap between 1080p and 4K Low (a 63% drop) suggests that the RTX 4080’s raw compute (48.74 TFLOPS FP32) is the primary limiter at 4K, not the CPU’s 8 cores or 96 MB L3 cache. The data shows that the 7800X3D, with a boost clock of 5.00 GHz, is more than capable of feeding the GPU at lower resolutions, but the 4080 cannot maintain high frame rates when pixel count quadruples.

Comparing presets at each resolution reveals consistent behavior. At 1440p, the spread from Low (209 FPS) to Ultra (99 FPS) is 110 FPS, while at 4K the spread from Low (116 FPS) to Ultra (55 FPS) is 61 FPS. The smaller absolute spread at 4K indicates that the GPU is already saturated at Low settings; adding graphical fidelity (from Low to Ultra) has a proportionally smaller impact because the baseline load is already so high. This is a clear sign that 4K Ultra is beyond the comfortable range for this combo, and the 55 FPS average at 4K Ultra confirms it.

CPU Role

The AMD Ryzen 7 7800X3D is a 7000-series desktop chip with 8 cores and 16 threads, built on the Zen 4 (Raphael) architecture using a 5 nm TSMC process. Its base clock is 4.20 GHz and boost clock reaches 5.00 GHz, with a 120 W TDP. The CPU’s standout feature is the 96 MB shared L3 cache, which is substantial for gaming workloads. Benchmark results show strong multi-threaded performance: Cinebench R23 multicore scores 16817, and Geekbench multicore hits 15610. Single-thread performance is also solid, with Cinebench R23 single-core at 1713 and Geekbench single-core at 2426.

In Palworld, the CPU’s role is evident in the 1080p results. At 1080p Low, the average FPS is 318, which is far beyond what most displays can show but indicates that the CPU is not the bottleneck; if it were, we would see frame rates plateau regardless of resolution. The fact that 1080p High (198 FPS) is significantly lower than 1080p Low (318 FPS) shows that the GPU is already doing more work at High settings, but the CPU still has headroom. The 7800X3D’s 8 cores and 16 threads, combined with its high single-core score (PassMark single-thread at 3759), are sufficient to avoid CPU-induced stutters even at the highest frame rates measured.

The CPU’s nearest rivals in the benchmark database include the AMD Ryzen 7 8700G and Intel Core i7-13650HX, both with an average score of 33089 (0% deltaPct), and the AMD Ryzen 9 PRO 6950H at 33201 (-0.4% deltaPct). This places the 7800X3D in a tight cluster where the 96 MB L3 cache likely provides an edge in gaming-specific tasks, though the deltaPct values show the performance difference is negligible in synthetic benchmarks. In Palworld, the data shows that the CPU’s role is to provide consistent frame times, which it does admirably: at 1440p Medium, the minimum FPS is 144 and maximum is 195, a narrow range that suggests smooth delivery.

GPU Role

The NVIDIA GeForce RTX 4080 is the clear performance driver in this combo. With 16 GB of GDDR6X VRAM on a 256-bit bus (716.8 GB/s bandwidth), it has ample memory for Palworld’s open-world environments. The GPU’s boost clock is 2505 MHz, and it features 9728 shading units, 304 TMUs, and 112 ROPs. Its Ada Lovelace architecture supports DirectX 12 Ultimate, and its PassMark G3D score of 34457 reflects strong rasterization performance. The GPU’s nearest rival, the RTX 4080 SUPER, scores 54209 (deltaPct 0.1%), meaning the non-SUPER variant is essentially identical in synthetic benchmarks.

The GPU’s role becomes clear when examining the 4K results. At 4K High, the average FPS is 72, which is playable but not ideal for fast-paced survival action. At 4K Ultra, the average drops to 55 FPS, with no minimum FPS recorded, implying potential dips below that. The 16 GB VRAM is not the issue here—Palworld is not particularly VRAM-hungry—but the sheer pixel count at 3840x2160 overwhelms the 4080’s compute. The 48.74 TFLOPS FP32 figure is high, but 4K requires rendering four times the pixels of 1080p, and the data shows that even with Low settings (116 FPS at 4K), the GPU cannot match its 1080p Low performance (318 FPS).

The RTX 4080’s memory bandwidth is a critical factor. At 1440p Medium, the combo achieves 169 FPS average with a minimum of 144 FPS, showing that the GPU can maintain high refresh rates when memory bandwidth is not saturated. At 4K, the bandwidth becomes a constraint: the jump from Medium (94 FPS) to High (72 FPS) is 22 FPS, a larger drop than the 1080p Medium-to-High gap (257 to 198 FPS, a 59 FPS drop). This suggests that at 4K, the GPU’s texture rate (761.5 GTexel/s) and pixel rate (280.6 GPixel/s) are being taxed, and the memory system cannot compensate.

Settings Recommendations

Based on the measured rows, the optimal balance of performance and visual quality depends on the target resolution. For 1920x1080, the High preset at 198 FPS average is the best recommendation. It offers a 141 FPS improvement over Ultra (150 FPS) while still providing good fidelity, and it is only 59 FPS lower than Low (318 FPS), which is unnecessary for most displays. The 1080p Medium preset (257 FPS) is also viable, but High provides a better visual experience with minimal performance loss.

For 2560x1440, the High preset at 130 FPS average is the sweet spot. It is 39 FPS lower than Medium (169 FPS) but 31 FPS higher than Ultra (99 FPS). The 130 FPS average is smooth on 144Hz monitors, and the minimum FPS at Medium (144) shows that the GPU can handle dips well. If maximum visual quality is desired, Ultra at 99 FPS is still playable, but the High preset offers a better margin for frame time consistency.

For 3840x2160, the Medium preset at 94 FPS average is the recommended starting point. It provides a 22 FPS improvement over High (72 FPS) and is only 22 FPS lower than Low (116 FPS). The Medium preset also has recorded minimum and maximum FPS (80 and 108), indicating stable performance. Ultra at 55 FPS average is not recommended for 4K, as it risks dropping below 60 FPS in demanding scenes. Low at 116 FPS is the fallback if smoothness is paramount, but it sacrifices too much visual detail for a survival game where distant object visibility matters.

The data suggests that this combo is best suited for 1440p High or 4K Medium. Pushing to 4K Ultra is possible but yields an experience that is merely playable, not ideal. The 55 FPS average at 4K Ultra is the only row where the frame rate dips below 60, and that is a clear signal to avoid that preset at that resolution.

How This Combo Ranks

In the benchmark database, this combo (AMD Ryzen 7 7800X3D + NVIDIA GeForce RTX 4080) ranks 247th out of 3711 tested combinations for Palworld. This places it in the top 6.7% of all combos, which is a strong result given the game’s early access optimization. The rank reflects the synergy between the CPU’s strong single-thread performance (PassMark single-thread at 3759) and the GPU’s high average benchmark score (54247), with the RTX 4080 sitting at the 86th percentile of all GPUs.

The combo’s rank is not higher because the RTX 4080, while powerful, is not the absolute fastest GPU available. Its nearest rival, the RTX 4080 SUPER, has nearly identical synthetic scores (54209 vs 54247, deltaPct 0.1%), meaning the SUPER would likely rank similarly. The CPU’s 83rd percentile rank (average benchmark score 33079) is also not at the very top, as chips like the Ryzen 9 PRO 6950H score slightly higher (33201), though the 7800X3D’s 3D V-cache design is optimized for gaming.

Relative to other combos, this pairing is likely limited by the GPU’s 16 GB VRAM and 256-bit bus, which prevents it from achieving the highest possible scores in memory-heavy titles. However, in Palworld, the measured FPS data shows that the combo is not VRAM-limited; at 1080p and 1440p, the frame rates are high enough to suggest that the CPU would be the bottleneck if any, but the 7800X3D’s 8 cores handle the load. The rank of 247 indicates that there are 246 combos with faster hardware, likely featuring higher-end GPUs like the RTX 4090, but for the vast majority of users, this combo is in the top tier.

Measured FPS Breakdown

The following table summarizes all measured FPS data from the FACT PACK, organized by resolution and settings. All numbers are exact averages, with minimum and maximum values included where available.

1920x1080 (1080p)

• Low: 318 FPS average (no min/max recorded)
• Medium: 257 FPS average, 219 FPS minimum, 296 FPS maximum
• High: 198 FPS average (no min/max recorded)
• Ultra: 150 FPS average (no min/max recorded)

2560x1440 (1440p)

• Low: 209 FPS average (no min/max recorded)
• Medium: 169 FPS average, 144 FPS minimum, 195 FPS maximum
• High: 130 FPS average (no min/max recorded)
• Ultra: 99 FPS average (no min/max recorded)

3840x2160 (4K)

• Low: 116 FPS average (no min/max recorded)
• Medium: 94 FPS average, 80 FPS minimum, 108 FPS maximum
• High: 72 FPS average (no min/max recorded)
• Ultra: 55 FPS average (no min/max recorded)

The data shows that the Medium preset is the only one with full min/max data at all three resolutions (1440p and 4K, plus 1080p), which suggests it is a stable preset. At 1080p, the Medium preset’s 219 FPS minimum is above the refresh rate of most monitors. At 1440p, the 144 FPS minimum is exactly at 144Hz, meaning it will occasionally hit that limit. At 4K, the 80 FPS minimum is still playable, but the 55 FPS average at Ultra highlights the need to avoid that preset.

In summary, the AMD Ryzen 7 7800X3D + NVIDIA GeForce RTX 4080 combo is a high-tier performer in Palworld, excelling at 1080p and 1440p with frame rates that exceed 130 FPS at High settings. At 4K, it remains competent at Medium (94 FPS) but struggles at Ultra (55 FPS), making the Medium preset the recommended choice for 4K gaming. The combo’s 247th rank out of 3711 confirms its position as a premium, but not top-of-the-line, pairing.