Barony

How This Combo Ranks

The AMD Ryzen 7 7800X3D paired with the NVIDIA GeForce RTX 4080 lands at rank 244 out of 3717 tested combos in Barony. That places this configuration in the top 6.6% of all systems tested, which is a strong result for a game that is fundamentally a roguelike rather than a graphical showcase. The ranking reflects the entire system's capability, and the data suggests that this combo is not leaving much performance on the table in this title.

Looking at the individual components, the CPU sits at the 83rd percentile among all processors, with an average benchmark score of 33079. Its nearest rivals are clustered extremely close: the AMD Ryzen 7 8700G and Intel Core i7-13650HX both score 33089, a delta of 0%, while the AMD Ryzen 7 7745HX scores 33091. The AMD Ryzen 9 PRO 6950H trails slightly at 33201, which is -0.4% relative to the 7800X3D. These are effectively statistical ties in synthetic benchmarks, meaning the CPU is performing exactly as expected for its class.

The GPU side is similarly tight. The RTX 4080 sits at the 86th percentile among all GPUs with an average benchmark score of 54247. Its nearest rival, the RTX 4080 SUPER, scores 54209, a delta of 0.1% in favor of the standard 4080. The AMD Radeon Pro W5700X scores 54828 (-1.1%), the Radeon RX 6750 GRE 12 GB scores 55698 (-2.6%), and the Radeon 8060S scores 55757 (-2.7%). The 4080 is essentially neck-and-neck with the SUPER variant in these aggregate tests, which is notable given that the SUPER is typically positioned as the refresh.

What matters more for Barony is the measured frame data. The combo produces playable-to-excessive frame rates across every resolution and settings preset tested. At 1080p, the lowest average is 274 FPS on Ultra, which is far beyond what any display can show. Even at 4K Ultra, the system holds 91 FPS average, which is comfortably above the 60 FPS threshold for smooth gameplay. This is a system that will not struggle with Barony's demands under any configuration.

Settings Recommendations

The measured data offers four settings presets—Low, Medium, High, and Ultra—across three resolutions. The key observation is that Barony scales remarkably well with the RTX 4080, and the differences between presets are mostly about headroom rather than playability.

At 1080p, every preset produces averages above 270 FPS. Low hits 600 FPS, Medium 446 FPS, High 383 FPS, and Ultra 274 FPS. The gap between Low and Ultra is 326 FPS, which is a 54% reduction from Low to Ultra. However, since even Ultra is far beyond any refresh rate ceiling (unless you own a 240Hz or 360Hz monitor), the recommendation is to use Ultra at 1080p. There is no reason to sacrifice visual quality for frame rates that are already excessive.

At 1440p, the pattern continues. Low averages 379 FPS, Medium 281 FPS, High 242 FPS, and Ultra 173 FPS. The drop from High to Ultra is 69 FPS (28%), which is noticeable but still leaves Ultra well above 144Hz. For a 144Hz monitor, Ultra is the clear choice. For a 240Hz monitor, High still delivers 242 FPS, which is just above the refresh ceiling. Medium and Low are unnecessary unless you are chasing maximum frame times for competitive play, which is unlikely in a roguelike.

At 4K, the data becomes more interesting. Low averages 198 FPS, Medium 147 FPS, High 126 FPS, and Ultra 91 FPS. Here, Ultra is the only preset that dips below 100 FPS. High at 126 FPS is still excellent for 4K, and Medium at 147 FPS offers a substantial bump. The recommendation for 4K is High as the sweet spot, because it maintains a high average while preserving visual fidelity. Ultra is playable at 91 FPS, but the 35 FPS gain from dropping to High is significant and likely worth the visual trade-off for most users. Low is not recommended at 4K because the visual degradation is severe and the frame rate gain over Medium is only 51 FPS, which is not meaningful at these levels.

Resolution Scaling

The FPS drop from 1080p to 4K reveals how this combo scales with resolution and where the bottleneck lies. At High settings, the progression is 383 FPS at 1080p, 242 FPS at 1440p, and 126 FPS at 4K. That is a 37% drop from 1080p to 1440p, and a 67% drop from 1080p to 4K.

At Low settings, the pattern is steeper: 600 FPS at 1080p, 379 FPS at 1440p, and 198 FPS at 4K. That is a 37% drop to 1440p and a 67% drop to 4K—identical percentages to High. At Medium, the numbers are 446, 281, and 147, which again represent a 37% and 67% reduction. Ultra shows 274, 173, and 91, with a 37% drop to 1440p and a 67% drop to 4K.

The consistency of these percentages—37% and 67% across all four presets—is striking. It indicates that resolution scaling in Barony is purely resolution-bound and independent of graphics settings. The rendering workload scales with pixel count, and the RTX 4080 is handling that scaling linearly. The 4K pixel count is 4.44 times that of 1080p, but the frame rate does not drop by a factor of 4.44; it drops by a factor of roughly 3.0. This suggests that the CPU is picking up some of the slack at lower resolutions, and the GPU is not fully saturated until 4K.

The fact that Low settings at 1080p hit 600 FPS while Ultra at 4K drops to 91 FPS shows that the GPU is the primary limiter at high resolutions. The CPU, with its 8 cores and 16 threads, is providing enough throughput to feed the GPU at 1080p, but the GPU's rendering workload becomes the ceiling as resolution increases. This combo is GPU-bound in Barony at 4K, but CPU-bound at 1080p where the frame rates exceed what the GPU can physically output.

Measured FPS Breakdown

1920x1080: The data shows four presets with strong averages. Low produces 600 FPS average, which is the highest measured value in the entire dataset. Medium averages 446 FPS with a minimum of 379 FPS and a maximum of 513 FPS. High averages 383 FPS. Ultra averages 274 FPS. The spread from Low to Ultra is 326 FPS, but even the lowest average is far above any practical refresh rate. The minimum FPS data is only available for Medium (379 FPS), which indicates that the frame time consistency is excellent at this resolution.

2560x1440: Low averages 379 FPS. Medium averages 281 FPS with a minimum of 239 FPS and a maximum of 324 FPS. High averages 242 FPS. Ultra averages 173 FPS. The drop from 1080p to 1440p is consistent at 37% for each preset. At 1440p, Ultra is the only preset that falls below 200 FPS, but 173 FPS is still well above the 144Hz threshold. Medium's minimum of 239 FPS suggests that even under demanding scenes, the system rarely dips below 240 FPS, which is relevant for high-refresh 240Hz displays.

3840x2160: Low averages 198 FPS. Medium averages 147 FPS with a minimum of 125 FPS and a maximum of 169 FPS. High averages 126 FPS. Ultra averages 91 FPS. At 4K, the GPU becomes the clear limiting factor. The gap between Low and Ultra is 107 FPS, which is a 54% reduction. Medium's minimum of 125 FPS is still above 120Hz, which is a common 4K monitor refresh rate. High at 126 FPS is nearly identical to Medium's average, suggesting that the visual quality difference between Medium and High is small in performance terms. Ultra at 91 FPS is the only preset that drops below 100 FPS, but it remains playable for a roguelike where reaction times are less critical than in competitive shooters.

FAQ

Q: Is this combo overkill for Barony?

A: The data suggests yes for most use cases. At 1080p, even Ultra averages 274 FPS, which exceeds the refresh rate of virtually all monitors. At 4K Ultra, the system still averages 91 FPS. Only if you are targeting 240Hz at 4K would this combo be insufficient, and that is an extreme scenario.

Q: What is the best settings preset for 4K?

A: High is the recommended preset at 4K, with an average of 126 FPS. Medium averages 147 FPS and offers a 21 FPS improvement, but High provides better visual quality for a modest 21 FPS loss. Ultra drops to 91 FPS, which is a significant 35 FPS reduction from High.

Q: How does the RTX 4080 compare to the RTX 4080 SUPER in this context?

A: The benchmark scores show the RTX 4080 at 54247 and the RTX 4080 SUPER at 54209, a delta of 0.1% in favor of the standard 4080. In Barony, the measured FPS data is for the RTX 4080 specifically, and the SUPER's performance would be nearly identical based on the synthetic scores.

Q: Is the Ryzen 7 7800X3D holding back the RTX 4080 in Barony?

A: At 1080p, the CPU is likely the limiter, as evidenced by the 600 FPS Low result. At 4K, the GPU is clearly the bottleneck, with the CPU having headroom to spare. The 8-core, 16-thread configuration with a 5.00 GHz boost clock is sufficient for this game at all resolutions.

Q: What frame rates can I expect at 1440p with a 240Hz monitor?

A: High settings average 242 FPS, which is just above 240Hz. Ultra averages 173 FPS, which is below 240Hz. Medium averages 281 FPS, which provides headroom above 240Hz. For a 240Hz display, High is the optimal preset, as it delivers 242 FPS average with no discernible frame drops.

Q: Does the 96 MB L3 cache on the 7800X3D matter for Barony?

A: The CPU's L3 cache is 96 MB shared, which is substantial. In a roguelike with procedurally generated levels, cache size can affect how quickly the CPU accesses game data. The benchmark results show strong single-thread performance (1713 in Cinebench R23 single-core), which is relevant for game logic. However, the measured FPS data does not isolate cache effects, so the impact is inferred rather than directly measured.

CPU Role

The AMD Ryzen 7 7800X3D is an 8-core, 16-thread processor from the 7000 series, built on the Zen 4 architecture with the Raphael codename. It operates on a 5 nm process from TSMC, with a base clock of 4.20 GHz and a boost clock of 5.00 GHz. The CPU supports DDR5 memory with a dual-channel bus and 83.2 GB/s of memory bandwidth. The 96 MB shared L3 cache is the standout feature, which is designed to improve gaming performance by reducing memory latency.

In Barony, the CPU's role is to handle game logic, procedural generation, and frame pacing. The measured FPS data shows that at 1080p Low, the system reaches 600 FPS, which is likely near the CPU's maximum frame output limit. The 3DMark scores support this: 7980 in the 16-thread test and 959 in the single-thread test. The single-thread score is particularly relevant for roguelikes, which often have serial game logic that cannot be fully parallelized.

The CPU's nearest rivals in benchmark scores are the Ryzen 7 8700G, Core i7-13650HX, and Ryzen 7 7745HX, all within 0% delta. This indicates that the 7800X3D is performing at the expected level for its class. The 83rd percentile among all CPUs means it is in the top 17% of processors tested, which is a strong position.

The 3DMark multi-thread scores show scaling from 1887 (2 threads) to 7967 (max threads), with 8-thread performance at 6539. This scaling is nearly linear, which means the CPU is efficiently utilizing all cores. In Barony, this translates to consistent frame delivery, as evidenced by the minimum FPS values at Medium settings: 379 FPS at 1080p, 239 FPS at 1440p, and 125 FPS at 4K. These minimums are not far below the averages, indicating that the CPU is not causing frame hitches or stutters.

The 5.00 GHz boost clock is the key for single-threaded game logic. Cinebench R23 single-core score of 1713 confirms strong single-thread performance. The 16 threads provide headroom for background tasks and multi-threaded aspects of the game engine, but the core count is not excessive for this title. The 120 W TDP means the CPU is power-efficient, which is relevant for sustained gaming sessions where thermal throttling could otherwise reduce performance.

In summary, the 7800X3D is a capable partner for the RTX 4080 in Barony. The CPU provides enough throughput to push frame rates beyond 600 FPS at low settings, and it does not bottleneck the GPU at 4K. The 3D V-Cache and high boost clock are the defining features, and the benchmark data shows they deliver as intended. This combo is well-balanced for Barony, with the GPU becoming the limiting factor only at 4K Ultra.