Palworld

Palworld

AVERAGE FPS
122
excellent

This combination delivers exceptional performance with an average of 122 FPS, perfect for high refresh rate gaming and competitive play.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 43 57 73 91
1440p QHD 77 102 132 163
1080p Full HD 117 155 201 248

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 91
3840x2160 Medium 73
3840x2160 High 57
3840x2160 Ultra 43
2560x1440 Low 163
2560x1440 Medium 132
2560x1440 High 102
2560x1440 Ultra 77
1920x1080 Low 248
1920x1080 Medium 201
1920x1080 High 155
1920x1080 Ultra 117

Palworld with AMD Ryzen 7 5800XT + AMD Radeon RX 9070 XT, In-Depth Analysis

Palworld running on the AMD Ryzen 7 5800XT with the AMD Radeon RX 9070 XT shows a scaling pattern that clearly identifies the GPU as the dominant performance limiter across the tested resolution range. The transition from 1080p to 1440p to 4K produces predictable frame rate drops that align with pixel-count increases, but the magnitude of the drop varies significantly by settings preset, revealing where the graphics card’s resources become exhausted.

Resolution Scaling

The measured data shows frame rates halving or nearly halving as resolution increases, which is the classic signature of a GPU-bound scenario. At High settings, the average frame rate falls from 155 FPS at 1920x1080 to 102 FPS at 2560x1440, a 34% reduction, and then to 57 FPS at 3840x2160, another 44% reduction from the 1440p result. This progressive decline is steep but not perfectly linear with pixel count; the 1440p to 4K jump involves roughly 2.25 times the pixels, and the frame rate drops by a factor of 1.79, indicating some efficiency loss at higher resolutions but still firmly in GPU-bound territory.

The Low preset tells a similar story with higher absolute numbers. The 248 FPS at 1080p drops to 163 FPS at 1440p and then to 91 FPS at 4K. The percentage drops are 34% and 44% respectively, mirroring the High preset’s scaling almost exactly. This consistency across presets suggests that the limiting factor is the render pipeline’s pixel throughput rather than any CPU-side constraint that might manifest differently at lower graphical workloads. The fact that even at Low settings the 4K result barely exceeds 90 FPS reinforces that the RX 9070 XT’s fill rate and memory bandwidth are the ceiling here.

Medium settings provide the most complete picture because they include min and max frame data. At 1080p Medium, the average is 201 FPS with a minimum of 171 and a maximum of 231. At 1440p, the average drops to 132 FPS with a minimum of 113 and maximum of 152. At 4K, the average falls to 73 FPS with a minimum of 62 and maximum of 84. The spread between min and max remains proportionally similar across resolutions, roughly 30% of the average, which indicates that frame pacing issues do not worsen dramatically as resolution climbs; the bottleneck is steady throughput rather than sporadic spikes.

The Ultra preset shows the most dramatic resolution sensitivity. The 117 FPS at 1080p drops to 77 FPS at 1440p and then to 43 FPS at 4K. The 4K Ultra result is below the 60 FPS threshold that many users consider the minimum for smooth play, and even the 1440p Ultra result is only marginally above it. This preset’s scaling from 1440p to 4K shows a 44% reduction, identical to the other presets, confirming that the GPU’s computational resources scale predictably with pixel load regardless of the specific graphical features enabled.

GPU Role

The RX 9070 XT’s specifications explain the observed behavior. Its 16 GB of GDDR6 memory on a 256-bit bus provides 644.6 GB/s of bandwidth, which is substantial but still finite. The card’s boost clock of 2970 MHz and game clock of 2400 MHz determine the peak compute throughput, and the 4096 shading units and 128 ROPs handle the pixel processing. The 128 ROPs are particularly relevant for resolution scaling because they directly limit how many pixels can be written per frame; as resolution increases, the ROP workload scales linearly with pixel count, and the measured frame rate drops reflect this.

The VRAM capacity of 16 GB is not likely a limiting factor at any of the tested settings, as even 4K Ultra in Palworld would struggle to exceed that allocation, but the bandwidth might be. The 644.6 GB/s figure is high, yet the 4K results, particularly the 43 FPS at Ultra, suggest that texture fetch and memory access patterns are saturating the available bandwidth at high resolutions. The card’s 3DMark Steel Nomad DX12 score of 7260 and Passmark G3D score of 26795 place it in a mid-range percentile (55th against all GPUs), which is consistent with the observed inability to maintain 60 FPS at 4K Ultra.

The GPU’s relative position among its nearest rivals is unusual. The nearestRivals list shows the RX 9070 XT’s average benchmark score of 13543 is nearly identical to much older and lower-tier cards like the AMD Radeon HD 7770M (13536, deltaPct 0.1) and the NVIDIA GeForce GTX 570 (13515, deltaPct 0.2). This is a quirk of the aggregate benchmark metric, which likely includes legacy tests that do not reflect modern gaming workloads. The measured FPS data in Palworld, however, shows the RX 9070 XT performing at a level far beyond those old rivals, so the percentile and rival data should be interpreted cautiously when predicting real-world game performance.

FAQ

Q: Can the RX 9070 XT maintain 60 FPS at 4K in Palworld?

A: Only at Medium settings, where the average is 73 FPS with a minimum of 62. At High settings the average drops to 57 FPS, and at Ultra it falls to 43 FPS, both below the 60 FPS threshold.

Q: What is the best resolution for this combo if targeting 100+ FPS?

A: At 1440p, High settings yield 102 FPS average, and Medium yields 132 FPS. At 1080p, all presets except Ultra exceed 100 FPS, with Low reaching 248 FPS and High reaching 155 FPS.

Q: How much performance is lost going from 1080p to 1440p at High settings?

A: The average frame rate drops from 155 FPS to 102 FPS, a 34% reduction. This is consistent across Low and Medium presets as well.

Q: Is the CPU or GPU the bottleneck at 1080p Low settings?

A: The 248 FPS result at 1080p Low is still below what the CPU’s single-thread performance would suggest as a hard ceiling, but the consistent scaling pattern across presets indicates the GPU remains the primary limiter even at this low resolution.

Q: Does the Ultra preset provide any benefit worth the frame rate cost?

A: The Ultra preset at 1080p produces 117 FPS, which is 38 FPS lower than High’s 155 FPS. At 1440p the difference is 25 FPS (77 vs 102), and at 4K it is 14 FPS (43 vs 57). The visual uplift is not quantified in the data, but the frame rate cost is substantial at every resolution.

Q: What is the minimum frame rate recorded for this combo?

A: The only minimum frame rates reported are for Medium settings: 171 FPS at 1080p, 113 FPS at 1440p, and 62 FPS at 4K. The other presets have no min FPS data.

Settings Recommendations

The measured data provides a clear ranking of presets by frame rate at each resolution, and the choice of best settings depends on the target display and performance preference. For 4K displays, Medium is the only preset that reliably stays above 60 FPS, with an average of 73 FPS and a minimum of 62 FPS. High at 4K averages 57 FPS, which might be acceptable for slower-paced gameplay but risks dropping below 60 during intense scenes. Ultra at 4K is not recommended, as the 43 FPS average falls well short of smooth play.

For 1440p, High offers the best balance, averaging 102 FPS with no reported minimums that would suggest stutter. This is comfortably above 60 FPS and close to 100, making it suitable for high-refresh-rate monitors. Medium at 1440p provides 132 FPS average with a minimum of 113, which is excellent for competitive play, but the jump to High costs 30 FPS. Ultra at 1440p averages 77 FPS, which is still playable but offers diminishing returns over High given the 25 FPS penalty.

For 1080p, High is the recommended preset, delivering 155 FPS average. This is well above the refresh rate of most standard monitors and leaves headroom for demanding scenes. Medium reaches 201 FPS, which benefits 240 Hz displays, and Low hits 248 FPS, but the visual quality loss at Low is unlikely to be worth the extra 93 FPS over High. Ultra at 1080p averages 117 FPS, which is still smooth but represents a 38 FPS drop from High for marginal visual gains.

The data indicates that the High preset is the sweet spot for this combo across all resolutions, providing the best frame rate per visual quality based on the measured rows. Users with 1440p or 1080p high-refresh displays should prioritize High settings, while 4K users must settle for Medium to maintain playable performance.

How This Combo Ranks

The combo of the AMD Ryzen 7 5800XT and AMD Radeon RX 9070 XT ranks 902nd out of 3711 tested combinations in Palworld. This places it in the 76th percentile of all tested combos, meaning it outperforms roughly three-quarters of the configurations in the database for this specific game. The ranking reflects the combination’s overall capability, and the measured FPS data confirms that this position is earned primarily through the GPU’s strong performance at lower resolutions.

The rank of 902 out of 3711 might seem modest given the hardware’s specifications, but the context matters. Many combos above this rank likely use higher-end GPUs or newer CPU generations. The Ryzen 7 5800XT is a Zen 3 part with 8 cores and 16 threads, and its 3DMark multi-threaded scores (7683 for 16 threads, 7680 for max threads) show strong but not top-tier CPU performance. The GPU’s 55th percentile overall ranking is dragged down by legacy benchmarks, but its real-world Palworld results are competitive.

Compared to the CPU’s nearest rivals, the Ryzen 7 5800XT performs nearly identically in aggregate benchmarks. The AMD Ryzen 7 7840H scores 29868 (deltaPct 0), the Ryzen 7 8845HS and 7840HS both score 29955 (deltaPct -0.3), and the Ryzen 5 9600X scores 29713 (deltaPct 0.6). This means the CPU is not a differentiator in this combo; the GPU’s performance determines where the combo lands in the rankings. The 902nd position out of 3711 suggests that while the combo is capable, it is not at the extreme high end for Palworld, which is consistent with the GPU’s 4K limitations.

Measured FPS Breakdown

At 1920x1080, the combo delivers its highest frame rates. Low settings produce an average of 248 FPS. Medium settings average 201 FPS with a minimum of 171 and maximum of 231. High settings average 155 FPS. Ultra settings average 117 FPS. The progression shows a steady decline as graphical complexity increases, with the largest single drop occurring between Medium and High (46 FPS) and the smallest between High and Ultra (38 FPS).

At 2560x1440, the frame rates remain strong but drop noticeably. Low settings average 163 FPS. Medium settings average 132 FPS with a minimum of 113 and maximum of 152. High settings average 102 FPS. Ultra settings average 77 FPS. The percentage drops from 1080p are consistent at roughly 34% for Low, Medium, and High, but Ultra drops by 34% as well (117 to 77), maintaining the same scaling factor across all presets.

At 3840x2160, the frame rates fall to the lowest measured values. Low settings average 91 FPS. Medium settings average 73 FPS with a minimum of 62 and maximum of 84. High settings average 57 FPS. Ultra settings average 43 FPS. The 4K results show that only Low and Medium maintain averages above 60 FPS, while High and Ultra fall below the common smoothness threshold. The minimum frame rate of 62 FPS at 4K Medium is the only recorded 4K minimum, and it is just barely above 60, indicating that even the recommended preset has occasional dips.

CPU Role

The AMD Ryzen 7 5800XT’s specifications provide context for its role in this combo. It has 8 cores and 16 threads with a base clock of 3.80 GHz and boost clock of 4.80 GHz. The Zen 3 architecture on a 7 nm process delivers strong single-thread performance, as shown by the 3DMark single-thread score of 959 and Cinebench R23 single-core score of 3359. The multi-threaded performance is also robust, with Cinebench R23 multi-core scoring 23794 and Passmark multithread scoring 28053.

In Palworld, which is a survival game that can be CPU-intensive in base-building and creature-rendering scenarios, the 5800XT’s 8 cores and 16 threads provide ample headroom. The measured frame rates at 1080p Low (248 FPS) suggest the CPU can feed the GPU well beyond the point where the GPU becomes the bottleneck. The CPU’s percentile ranking of 81st against all CPUs indicates it is above average, and its nearest rivals all show benchmark scores within 0.6% of its 29879 average, confirming that it sits in a tightly contested performance tier.

The key observation is that the CPU never appears to limit the combo in any of the tested configurations. The frame rate drops from 1080p to 4K are consistent across all settings, which would not be the case if the CPU were constraining performance at lower resolutions. If the CPU were the bottleneck, the 1080p Low result would not scale down as dramatically when moving to 1440p and 4K; instead, the GPU’s pixel throughput governs the outcome. The 5800XT’s boost clock of 4.80 GHz helps maintain high minimum frame rates, as evidenced by the 4K Medium minimum of 62 FPS, which stays close to the 73 FPS average.

Hardware Specifications

AMD Ryzen 7 5800XT

Cores / Threads 8 / 16
Base Clock 3800 MHz
Boost Clock 4800 MHz
TDP 105W
Socket AMD Socket AM4
View Full CPU Details →

AMD Radeon RX 9070 XT

VRAM 16 GB GDDR6
Base Clock —
Boost Clock 2970 MHz MHz
TDP 304 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 7 5800XT + AMD Radeon RX 9070 XT in Palworld

Resolution Settings Avg FPS
3840x2160 Low 91.0
3840x2160 Medium 73.0
3840x2160 High 57.0
3840x2160 Ultra 43.0
2560x1440 Low 163.0
2560x1440 Medium 132.0
2560x1440 High 102.0
2560x1440 Ultra 77.0
1920x1080 Low 248.0
1920x1080 Medium 201.0
1920x1080 High 155.0
1920x1080 Ultra 117.0

Palworld with Ryzen 7 5800XT + Other GPUs

See how Palworld performs with the same CPU but different graphics cards.

Palworld with RX 9070 XT + Other CPUs

See how Palworld performs with the same GPU but different processors.

Other Games with Ryzen 7 5800XT + RX 9070 XT

Explore FPS benchmarks for other games using this same hardware combination.