Palworld

Palworld’s performance with the AMD Ryzen 7 5700G and NVIDIA GeForce RTX 5070 shows a clear progression from a heavily GPU-bound state at 4K to a more balanced workload at 1080p. The measured data indicates a stable gaming experience across all tested resolutions, with the RTX 5070 providing ample headroom for high refresh rates at lower resolutions.

Resolution Scaling

The frame rate drop from 1080p to 4K is substantial, highlighting the GPU as the primary bottleneck at higher resolutions. At High settings, the average FPS falls from 165 at 1920x1080 to 109 at 2560x1440, a 34% reduction, and then further to 60 at 3840x2160, representing a 45% drop from the 1440p figure and a 64% drop from 1080p. This scaling pattern is typical for a game like Palworld, where the rendering load at 4K quadruples the pixel count compared to 1080p, placing significant stress on the graphics card.

The data shows that the RTX 5070’s 12 GB of GDDR7 memory and 672.0 GB/s bandwidth are sufficient to maintain playable frame rates even at 4K, but the performance ceiling is clearly defined by the GPU’s compute capabilities. At Low settings, the scaling is more dramatic, with 265 FPS at 1080p dropping to 175 FPS at 1440p and finally 97 FPS at 4K. This indicates that when the CPU is less burdened by game logic, the GPU’s raw pixel-pushing power becomes the deciding factor. The 4K Low result being nearly double the 4K Ultra result (97 vs 46 FPS) underscores how much of the GPU’s headroom is consumed by higher-fidelity effects.

Conversely, the scaling from 1440p to 1080p is less severe, with High settings improving from 109 to 165 FPS, a 51% increase. This suggests that at 1080p, the CPU begins to play a more significant role, as the Ryzen 7 5700G’s eight cores and sixteen threads are tasked with keeping up with the GPU’s output. The gap between Medium and High settings at 1080p (215 vs 165 FPS) is narrower than at 4K (79 vs 60 FPS), further indicating that the CPU is starting to limit performance at lower resolutions. The scaling pattern confirms that the RTX 5070 is the limiting component at 4K and 1440p, while the Ryzen 7 5700G becomes increasingly relevant at 1080p.

GPU Role

The NVIDIA GeForce RTX 5070, built on the Blackwell 2.0 architecture with a 5 nm process, is the clear performance driver in this configuration. Its boost clock of 2512 MHz and 6144 shading units deliver substantial compute throughput, evidenced by the 30.87 TFLOPS of FP32 performance. The 12 GB of GDDR7 memory on a 192-bit bus provides a 672.0 GB/s bandwidth, which is crucial for Palworld’s open-world environments that stream textures and geometry. The benchmark data shows the GPU reaching an average FPS of 265 at 1080p Low, which is well beyond the refresh rate of most monitors, indicating the card is not the limiting factor at this setting.

The GPU’s role becomes more pronounced at higher resolutions. At 4K Ultra, the average FPS drops to 46, showing that the card’s 80 ROPs and 192 TMUs are saturated by the demand for pixel and texture throughput. The 48 RT cores are present but Palworld does not appear to be heavily reliant on ray tracing, as the performance degradation from High to Ultra is consistent with traditional rasterization load increases. The VRAM capacity is not a concern here; even at 4K Ultra, the 12 GB allocation is sufficient, as the frame rate drop to 46 FPS is more attributable to compute limits than memory swapping.

The GPU’s percentile ranking of 82 places it above most tested graphics cards, and its average benchmark score of 40377 puts it in a close grouping with rivals like the AMD Radeon Pro 580, which scores 40318 (a 0.1% delta), and the AMD Radeon Pro 5300, which scores 40870 (a -1.2% delta). This suggests the RTX 5070 is a high-tier performer, though the nearest rivals are workstation-class cards rather than direct gaming competitors. In Palworld specifically, the GPU’s performance scales predictably with settings, showing a 79% increase in FPS from Ultra to Low at 4K (46 to 97 FPS), which demonstrates a wide range of headroom for users who prioritize frame rate over visual fidelity.

FAQ

Q: Can this combo run Palworld at 4K smoothly?

A: Yes, but only at Medium settings. The measured data shows an average of 79 FPS at 3840x2160 with Medium settings, with a minimum of 67 FPS and a maximum of 90 FPS. At High settings, the average drops to 60 FPS, which is still playable, but Ultra settings dip to 46 FPS, which may feel less consistent.

Q: What is the best resolution for high refresh rate monitors?

A: For a 144Hz or higher monitor, 1080p is the optimal choice. At 1920x1080 with Medium settings, the combo produces an average of 215 FPS, and at Low settings it reaches 265 FPS. At 1440p, only Low settings (175 FPS) break the 144 FPS barrier, while Medium sits at 141 FPS.

Q: How much performance is lost when going from 1080p to 4K?

A: The loss is significant. At High settings, the average FPS drops from 165 at 1080p to 60 at 4K, representing a 64% reduction. At Low settings, the drop is from 265 to 97 FPS, a 63% reduction. This indicates the GPU is the primary bottleneck at higher resolutions.

Q: Does the Ryzen 7 5700G bottleneck the RTX 5070?

A: The data suggests the CPU is not a major bottleneck at 4K or 1440p, where the GPU is clearly limiting performance. At 1080p, the CPU becomes more relevant, as evidenced by the smaller performance gap between Medium and High settings compared to higher resolutions, but the 8-core, 16-thread processor still delivers 125 FPS at Ultra settings.

Q: What is the difference between Medium and High settings at 1440p?

A: The difference is 32 FPS on average. Medium settings produce 141 FPS (min 120, max 163), while High settings produce 109 FPS. This suggests Medium offers a better balance for smoother gameplay at 1440p, while High is more visually demanding.

Q: Is the RTX 5070’s VRAM sufficient for Palworld?

A: Yes, the 12 GB of GDDR7 memory is not a limiting factor in the measured results. The performance scaling from Low to Ultra settings is consistent with compute-bound workloads, not memory capacity issues, even at 4K resolution.

Measured FPS Breakdown

At 1920x1080, the RTX 5070 delivers exceptional performance across all settings. Low settings achieve an average of 265 FPS, which drops to 215 FPS at Medium (with a minimum of 183 and maximum of 247 FPS). High settings produce 165 FPS on average, while Ultra settings still maintain a smooth 125 FPS. This resolution is clearly where the combo excels, offering frame rates that can fully utilize high-refresh-rate displays.

Moving to 2560x1440, the performance remains strong but shows more variation. Low settings yield 175 FPS, while Medium settings produce 141 FPS (min 120, max 163). High settings drop to 109 FPS, and Ultra settings fall to 83 FPS. The data shows that 1440p is a viable option for users who want a balance between visual quality and speed, with Medium settings providing a comfortable margin above 120 FPS.

At 3840x2160, the GPU is pushed to its limits. Low settings achieve an average of 97 FPS, which is still very playable. Medium settings produce 79 FPS (min 67, max 90), and High settings drop to 60 FPS. Ultra settings are the most demanding, yielding only 46 FPS on average. This resolution is best suited for Medium settings if a smooth experience is the priority, as the jump from Medium to High costs 19 FPS but may not be visually significant in all scenarios.

The Ultra preset consistently shows the largest performance penalty across all resolutions, with drops of 60 FPS from High at 1080p, 26 FPS at 1440p, and 14 FPS at 4K. This indicates that the Ultra preset includes effects that are disproportionately expensive relative to their visual impact, particularly at higher resolutions.

CPU Role

The AMD Ryzen 7 5700G, with its 8 cores and 16 threads based on the Zen 3 architecture, provides a solid foundation for Palworld. Its base clock of 3.80 GHz and boost clock of 4.60 GHz, combined with 16 MB of L3 cache, deliver sufficient single-threaded performance for game logic. The CPU’s benchmark results, including a Cinebench R23 multi-core score of 12830.5 and a single-core score of 1494, place it in the 79th percentile of all CPUs, indicating it is a capable mid-range processor.

In the measured Palworld results, the CPU’s influence is most apparent at 1080p. The fact that the gap between Medium and High settings narrows from 36 FPS at 4K (79 to 60) to 31 FPS at 1440p (141 to 109) and then to 50 FPS at 1080p (215 to 165) suggests that the CPU is beginning to limit frame rates at lower resolutions. However, the CPU still manages to support 125 FPS at 1080p Ultra, which is a demanding scenario for both components.

The Ryzen 7 5700G’s nearest rivals in synthetic benchmarks include the Intel Core i9-9900K, which scores 27097 (a -0.2% delta), and the AMD Ryzen AI 7 445, which scores 26936 (a 0.4% delta). This indicates the CPU is competitive with older high-end chips and newer mid-range parts. The CPU’s 65 W TDP and 7 nm process node suggest it runs efficiently, which is beneficial for sustained gaming sessions. While the CPU is not the star of this configuration, it does not appear to hold back the RTX 5070 in most scenarios, particularly at 1440p and 4K where the GPU is the clear limiting factor.

Settings Recommendations

For users targeting a 60 FPS experience at 4K, Medium settings are the recommended choice. The measured data shows 79 FPS on average at 3840x2160 with Medium, with a minimum of 67 FPS that stays above the 60 FPS threshold. High settings also achieve 60 FPS on average, but the lack of a recorded minimum makes Medium the safer option for consistency. Ultra settings should be avoided at 4K, as the 46 FPS average is below the standard for smooth gameplay.

At 1440p, Medium settings provide the best balance of performance and visual quality, with an average of 141 FPS and a minimum of 120 FPS. This ensures a smooth experience on 120Hz or 144Hz monitors. High settings are also viable at 109 FPS, but the 32 FPS cost may not justify the visual upgrade for competitive play. Low settings at 175 FPS are ideal for users who prioritize frame rate above all else, but Medium is the sweet spot for most players.

At 1080p, the recommendation depends on the monitor’s refresh rate. For 144Hz displays, Medium settings at 215 FPS provide ample headroom, while High settings at 165 FPS are also sufficient. For 240Hz displays, Low settings at 265 FPS are necessary to fully utilize the refresh rate. Ultra settings at 125 FPS are only recommended for users with a 120Hz monitor who want maximum visual fidelity, as the 40 FPS drop from High is significant.

Overall, the Medium preset emerges as the most versatile option across all resolutions, delivering frame rates that are 32% to 52% higher than High settings while maintaining a visually acceptable level of detail. The data shows a clear diminishing return when moving from Medium to High, making Medium the optimal choice for a smooth and responsive Palworld experience.

How This Combo Ranks

The AMD Ryzen 7 5700G and NVIDIA GeForce RTX 5070 combination ranks 778th out of 3711 tested combos in Palworld, placing it in the top 21% of all configurations. This is a strong result, indicating that the combo performs well above the median for this game. The ranking reflects the RTX 5070’s high percentile score of 82 among all GPUs, which is the primary driver of the combo’s performance, while the Ryzen 7 5700G’s 79th percentile CPU ranking provides adequate support.

The combo’s position in the rankings suggests that it outperforms the majority of tested systems, but there is still room for improvement. The GPU’s nearest rivals, such as the AMD Radeon Pro 580 (0.1% delta) and the AMD Radeon Pro WX 7100 (0.8% delta), are workstation cards that may not have the same gaming optimizations. The CPU’s nearest rivals, including the Intel Core i9-9900K (-0.2% delta) and the Intel Core i5-14400T (-0.4% delta), are comparable in synthetic benchmarks, but the Ryzen 7 5700G’s integrated graphics and lower TDP make it a unique choice for this pairing.

Given the measured FPS data, particularly the 165 FPS at 1080p High and 79 FPS at 4K Medium, the combo is well-suited for high-refresh-rate gaming at 1080p and solid 4K experiences at medium quality. The ranking of 778 out of 3711 places it ahead of most alternatives, and the performance scaling indicates that the RTX 5070 is the main contributor to this positive outcome. Users with this combo should focus on optimizing settings to balance visual quality and frame rate, as the hardware has demonstrated it can handle a wide range of scenarios.