Palworld

Palworld

AVERAGE FPS
61
good

This combination provides smooth gameplay with an average of 61 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 22 28 37 46
1440p QHD 39 51 66 82
1080p Full HD 59 78 101 125

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 46
3840x2160 Medium 37
3840x2160 High 28
3840x2160 Ultra 22
2560x1440 Low 82
2560x1440 Medium 66
2560x1440 High 51
2560x1440 Ultra 39
1920x1080 Low 125
1920x1080 Medium 101
1920x1080 High 78
1920x1080 Ultra 59

Palworld with AMD Ryzen 7 5700 + NVIDIA GeForce GTX 1070, In-Depth Analysis

Palworld presents a demanding workload for the AMD Ryzen 7 5700 and NVIDIA GeForce GTX 1070 combination, with benchmark results showing a clear performance hierarchy based on resolution and quality settings. The data indicates that this pairing is capable of delivering playable frame rates at 1080p with adjusted settings, but struggles significantly at higher resolutions, particularly when aiming for maximum visual fidelity. This analysis breaks down the measured performance metrics to provide a clear picture of what users can expect from this hardware configuration in Palworld.

Resolution Scaling

The measured FPS data reveals a steep performance drop as resolution increases from 1920x1080 to 3840x2160. At High settings, the average frame rate falls from 78 FPS at 1080p to 51 FPS at 1440p, and further down to 28 FPS at 4K. This represents a reduction of approximately 35% between 1080p and 1440p, and an additional 45% drop when moving to 4K. The scaling pattern strongly suggests that the GTX 1070 becomes the primary limiting factor at higher resolutions, as the pixel throughput demands exceed what the GPU can deliver.

At Low settings, the trend is even more pronounced. The average FPS at 1080p is 125, which drops to 82 at 1440p and 46 at 4K. The percentage reduction between each step is similar to High settings, indicating that the GPU's rendering capacity is being saturated regardless of the quality preset. This consistency points to a resolution-bound scenario where the GTX 1070's 8 GB of GDDR5 memory and 256-bit memory interface are working at their limits.

The Medium preset shows the same pattern, with averages of 101 FPS at 1080p, 66 FPS at 1440p, and 37 FPS at 4K. Notably, the 4K Medium result includes a minimum FPS of 31 and maximum of 42, showing some frame time variability. The Ultra preset is the most demanding, yielding only 59 FPS at 1080p, 39 FPS at 1440p, and 22 FPS at 4K. These numbers indicate that Ultra settings at 4K are essentially unplayable, while even 1080p Ultra falls below the 60 FPS threshold.

The data reveals that the GTX 1070's performance ceiling is reached quickly as resolution climbs. The GPU's 6.463 TFLOPS of FP32 compute power and 107.7 GPixel/s pixel rate are insufficient for maintaining smooth frame rates beyond 1440p. Interestingly, the gap between Low and Ultra settings narrows at higher resolutions, suggesting that the GPU is becoming the bottleneck rather than the CPU or memory subsystem.

Settings Recommendations

Based on the measured data, the optimal balance between visual quality and performance for this combination is the Medium preset at 1920x1080. This configuration delivers an average of 101 FPS, with a minimum of 86 FPS and maximum of 116 FPS, ensuring a consistently smooth experience. The High preset at 1080p, averaging 78 FPS, is also viable but provides less headroom for demanding scenes.

At 2560x1440, the Medium preset remains the best choice, averaging 66 FPS with a minimum of 57 FPS and maximum of 76 FPS. This keeps frame rates above 60 FPS on average, though dips below that threshold may occur. The High preset at 1440p, averaging 51 FPS, is playable but not ideal for fast-paced action. The Low preset at 1440p, at 82 FPS, offers the smoothest experience but sacrifices significant visual fidelity.

For 3840x2160, the data shows that all presets struggle to maintain playable frame rates. The Low preset, averaging 46 FPS, is the only option that approaches a playable level, while Medium at 37 FPS and High at 28 FPS are borderline. The Ultra preset at 22 FPS is not recommended for any gameplay scenario. Users targeting 4K should consider reducing resolution or accepting substantial compromises in visual quality.

The Ultra preset is only viable at 1080p, where it averages 59 FPS. This remains below the 60 FPS target, and users with high-refresh-rate monitors may notice the difference. Given the measured results, the Medium preset provides the best overall experience across all resolutions, balancing frame rate stability with acceptable visual quality.

GPU Role

The NVIDIA GeForce GTX 1070 plays a central role in determining Palworld's performance, as evidenced by the significant frame rate variations across settings and resolutions. The GPU features 8 GB of GDDR5 memory on a 256-bit bus, providing 256.3 GB/s of bandwidth. The base clock of 1506 MHz and boost clock of 1683 MHz drive 1920 shading units, 120 texture mapping units, and 64 raster output units.

The memory capacity of 8 GB appears sufficient for Palworld at 1080p and 1440p, as the frame rates scale predictably with resolution. However, at 4K, the combination of higher resolution textures and increased pixel load likely approaches the memory bandwidth limit. The 256.3 GB/s bandwidth is a potential bottleneck, as the 4K frame rates show a disproportionate drop compared to the 2.25x pixel count increase from 1440p.

The GTX 1070's Pascal architecture, built on a 16 nm process, delivers 6.463 TFLOPS of FP32 performance. This compute capability is adequate for 1080p gaming but insufficient for higher resolutions. The GPU's benchmark scores reflect its mid-range positioning: it has a percentile rank of 47 among all GPUs, with an average benchmark score of 9780. Its nearest rivals include the AMD FirePro W5000 (0.2% lower score), NVIDIA Quadro M2000M (0.5% lower), NVIDIA Tesla M10 (0.6% higher), and NVIDIA Tesla C2070 (0.7% higher). These comparisons show that the GTX 1070 sits in a competitive but not exceptional position.

The texture fill rate of 202.0 GTexel/s and pixel rate of 107.7 GPixel/s are capable of handling Palworld's environments at lower resolutions, but the 4K results indicate these limits are being reached. The GPU's DirectX 12 support (version 12_1) is adequate for the game, but the lack of dedicated ray tracing cores means any advanced lighting effects must be handled through traditional rasterization, further taxing the GPU.

How This Combo Ranks

The combination of the AMD Ryzen 7 5700 and NVIDIA GeForce GTX 1070 ranks 3067 out of 3711 tested combos in Palworld, placing it in the lower portion of the performance spectrum. This ranking reflects the GTX 1070's age and mid-range positioning, as the CPU is capable of much higher performance in other workloads. The CPU's percentile rank of 78 among all processors indicates it is a strong performer, but the GPU's percentile rank of 47 drags the overall combo ranking down.

The CPU's average benchmark score of 25517 places it in close competition with several rivals. The Intel Xeon D-2752TER scores 25530, a 0.1% difference, while the AMD Ryzen 5 7640U scores 25485, a 0.1% difference in the opposite direction. The AMD Ryzen 5 6600H scores 25550 (0.1% higher), and the AMD Ryzen 7 5825U scores 25446 (0.3% lower). These tight margins suggest the Ryzen 7 5700 is well-positioned in its performance class, but the GPU limits its gaming potential.

The combo's rank of 3067 out of 3711 means it outperforms roughly 17% of tested configurations. This places it in the lower quartile, indicating that users seeking high-performance Palworld gameplay would need a more powerful GPU. The data shows that the combo is balanced in the sense that neither component is severely bottlenecked at 1080p Medium, but the GPU becomes the clear limiting factor at higher resolutions and settings.

FAQ

Q: What is the best resolution for this combo in Palworld?

A: The measured data shows that 1920x1080 with Medium settings provides the best balance, averaging 101 FPS with a minimum of 86 FPS. Higher resolutions result in significant frame rate drops.

Q: Can this combo handle 4K gaming in Palworld?

A: At 4K, the highest average FPS achieved is 46 at Low settings. Medium settings drop to 37 FPS, High to 28 FPS, and Ultra to 22 FPS. These are below playable thresholds for most users.

Q: How does the GTX 1070 compare to its nearest rivals?

A: The GTX 1070 has an average benchmark score of 9780, with a percentile rank of 47. Its closest competitor, the AMD FirePro W5000, scores 9803 (0.2% higher), while the NVIDIA Quadro M2000M scores 9832 (0.5% higher).

Q: Is the Ryzen 7 5700 a bottleneck for this GPU?

A: The CPU's average benchmark score of 25517 and percentile rank of 78 indicate it is a strong performer. At 1080p Medium, the combo achieves 101 FPS, suggesting the CPU is not the primary bottleneck at lower resolutions.

Q: What settings should be avoided with this combo?

A: Ultra settings at any resolution above 1080p produce frame rates below 40 FPS. At 1440p Ultra, the average is 39 FPS, and at 4K Ultra, it drops to 22 FPS. These configurations are not recommended.

Q: How much performance is lost between Medium and Ultra at 1080p?

A: At 1920x1080, Medium averages 101 FPS while Ultra averages 59 FPS. This represents a performance reduction of approximately 42%, which is a significant trade-off for the visual improvements.

Measured FPS Breakdown

At 1920x1080, the measured results show a clear progression of frame rates. Low settings achieve an average of 125 FPS, making this the only preset that exceeds 120 FPS. Medium settings average 101 FPS, with a minimum of 86 FPS and maximum of 116 FPS. High settings average 78 FPS, and Ultra settings average 59 FPS. The step between Low and Medium (24 FPS) is similar to the step between High and Ultra (19 FPS), but the gap between Medium and High (23 FPS) is the largest.

At 2560x1440, performance drops noticeably. Low settings average 82 FPS, Medium settings average 66 FPS with a minimum of 57 FPS and maximum of 76 FPS, High settings average 51 FPS, and Ultra settings average 39 FPS. The reduction from 1080p to 1440p ranges from 34% at Low to 33% at High, showing consistent scaling.

At 3840x2160, the results are significantly lower. Low settings average 46 FPS, Medium settings average 37 FPS with a minimum of 31 FPS and maximum of 42 FPS, High settings average 28 FPS, and Ultra settings average 22 FPS. The drop from 1440p to 4K is severe, with Low settings losing 44% of its frame rate, Medium losing 44%, High losing 45%, and Ultra losing 44%. This consistency indicates a hard GPU limit.

CPU Role

The AMD Ryzen 7 5700 provides substantial processing power that is underutilized in Palworld at higher resolutions. The CPU features 8 cores and 16 threads based on the Zen 3 architecture, with a base clock of 3.70 GHz and boost clock of 4.60 GHz. Its 16 MB of L3 cache and dual-channel DDR4 memory support with 51.2 GB/s bandwidth provide ample throughput for game logic and physics calculations.

The CPU's benchmark results show strong multi-threaded performance, with a Cinebench R23 multicore score of 20655 and single-core score of 2916. The Passmark multithread score of 24303 and single-thread score of 3296 further demonstrate its capability. In 3DMark tests, the CPU scores 6628 with 16 threads and 901 single-thread, indicating robust performance across various workloads.

In Palworld, the CPU's role becomes more apparent at lower resolutions where the GPU is less stressed. At 1080p Low, the combo achieves 125 FPS, suggesting the CPU can handle the game's processing demands well. However, at 4K, the frame rates are limited by the GPU regardless of settings, meaning the CPU's performance headroom is not fully utilized. The CPU's 8 cores and 16 threads are likely sufficient for Palworld's open-world survival gameplay, which may involve many concurrent entities and physics calculations.

The CPU's nearest rivals show it is well-positioned. The Intel Xeon D-2752TER scores 25530 in average benchmarks, a 0.1% difference, while the AMD Ryzen 5 7640U scores 25485 (0.1% lower). The AMD Ryzen 5 6600H scores 25550 (0.1% higher), and the AMD Ryzen 7 5825U scores 25446 (0.3% lower). These small differences mean the Ryzen 7 5700 is competitive with other mid-range processors, though its gaming performance is ultimately constrained by the GTX 1070.

The data confirms that the CPU is not the limiting factor in Palworld for this combo. The consistent performance drops across resolutions and settings point to the GPU as the primary bottleneck, particularly at 1440p and above. Users with this CPU could benefit from a GPU upgrade to unlock higher frame rates, as the processor has demonstrated it can support higher performance levels in other applications.

Hardware Specifications

AMD Ryzen 7 5700

Cores / Threads 8 / 16
Base Clock 3700 MHz
Boost Clock 4600 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce GTX 1070

VRAM 8 GB GDDR5
Base Clock —
Boost Clock 1683 MHz MHz
TDP 150 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 7 5700 + NVIDIA GeForce GTX 1070 in Palworld

Resolution Settings Avg FPS
3840x2160 Low 46.0
3840x2160 Medium 37.0
3840x2160 High 28.0
3840x2160 Ultra 22.0
2560x1440 Low 82.0
2560x1440 Medium 66.0
2560x1440 High 51.0
2560x1440 Ultra 39.0
1920x1080 Low 125.0
1920x1080 Medium 101.0
1920x1080 High 78.0
1920x1080 Ultra 59.0

Palworld with GTX 1070 + Other CPUs

See how Palworld performs with the same GPU but different processors.

Other Games with Ryzen 7 5700 + GTX 1070

Explore FPS benchmarks for other games using this same hardware combination.