Palworld

Palworld with the AMD Ryzen 5 7500F and NVIDIA GeForce GTX 1070 produces a wide spread of frame rates, from a barely playable 20.3 FPS at 4K Ultra to a very smooth 126 FPS at 1080p Low. The data shows that the GTX 1070, despite its age, can handle this survival title, but only if the settings and resolution are chosen carefully. The measured results indicate a clear hierarchy where resolution and preset are the primary levers for performance, with the CPU providing a solid foundation that rarely becomes the limiting factor.

Settings Recommendations

Based on the measured FPS rows, the optimal experience depends heavily on the target resolution and whether the priority is visual fidelity or frame rate consistency. At 1920x1080, the data shows that the Low preset delivers an average of 126 FPS, which is ideal for high-refresh-rate monitors and fast-paced gameplay. The Medium preset still provides a very playable 100.6 FPS, offering a substantial improvement in visual quality with only a 20% performance cost compared to Low. The High preset at 79 FPS is also viable for those who prefer a more detailed world, but it drops below the 100 FPS threshold. The Ultra preset at 62.2 FPS is playable but represents a significant sacrifice in smoothness for marginal visual gains.

For 2560x1440, the recommendation shifts. The Low preset achieves an average of 83.5 FPS, which remains fluid and is the best option for maintaining high frame rates at this resolution. The Medium preset at 68.7 FPS is a strong alternative, providing a balanced mix of performance and visual quality that most users would find acceptable. The High preset at 50.1 FPS is workable but begins to feel less responsive, while the Ultra preset at 39.1 FPS is only suitable for slower, more methodical play. At 3840x2160, the data suggests that playable frame rates are difficult to achieve. The Low preset at 48 FPS is the only option that reaches near-standard playability, while Medium at 35.7 FPS and High at 29.7 FPS are noticeably stuttery. The Ultra preset at 20.3 FPS is effectively unplayable. The best experience per the measured rows is achieved by using the Low preset at 1440p, as it offers the highest frame rate that still maintains a high enough resolution to appreciate the game world, or the Medium preset at 1080p for a balanced blend of smoothness and visual fidelity.

How This Combo Ranks

The combination of the AMD Ryzen 5 7500F and NVIDIA GeForce GTX 1070 holds a combo rank of 1446 out of 1718 tested combos in Palworld. This places it in the lower 16th percentile of all combinations tested, indicating that while it is not at the very bottom, it is far from a high-performance pairing for this specific title. The data suggests that the GTX 1070 is the constraining component in this pairing, as the CPU is a modern, high-performance part that would typically be paired with a much stronger GPU. The rank reflects that the overall system performance is limited by the GPU's ability to process the game's graphics workload. In practical terms, this ranking means that users with this combo will need to rely on lower settings and resolutions to achieve acceptable frame rates, as evidenced by the measured FPS data. The combo's position is a direct consequence of the GPU's 51st percentile ranking among all GPUs, which is significantly lower than the CPU's 82nd percentile ranking among all CPUs.

GPU Role

The NVIDIA GeForce GTX 1070 is the decisive factor in this combo's Palworld performance. It features 8 GB of GDDR5 memory on a 256-bit bus, providing a bandwidth of 256.3 GB/s. The GPU's base clock is 1506 MHz, boosting to 1683 MHz, and it has a raw FP32 performance of 6.463 TFLOPS. In the measured data, the GPU's limitations are clearly visible in the scaling between presets. For example, at 1920x1080, moving from Low to Ultra increases the average FPS from 126 to 62.2, a drop of over 50%. This steep decline indicates that the GTX 1070's shading units and memory bandwidth are being saturated by the higher fidelity settings. The GPU's 8 GB VRAM is sufficient for 1080p and 1440p, but the data shows that at 4K Ultra, performance collapses to 20.3 FPS, suggesting that the memory capacity and bandwidth are insufficient for that workload. The GPU's benchmark scores reflect its mid-range standing, with a Passmark G3D score of 13498 and an average benchmark score of 12331, placing it in the 51st percentile of all GPUs. Its nearest rivals, such as the GeForce GTX 1650 SUPER with a score of 12504 and a delta of -1.4%, show that it is performing at a level consistent with a mid-range Pascal-era card.

Measured FPS Breakdown

The measured FPS data provides a complete picture of the combo's capabilities. At 1920x1080, the average frame rates are as follows: Low settings deliver 126 FPS, Medium settings deliver 100.6 FPS, High settings deliver 79 FPS, and Ultra settings deliver 62.2 FPS. This resolution is clearly the sweet spot for this combo, with all presets except Ultra remaining above the 60 FPS threshold for smooth play. At 2560x1440, the average frame rates are: Low settings at 83.5 FPS, Medium settings at 68.7 FPS, High settings at 50.1 FPS, and Ultra settings at 39.1 FPS. Here, the drop is more pronounced, with only the Low and Medium presets maintaining playable frame rates. At 3840x2160, the average frame rates are: Low settings at 48 FPS, Medium settings at 35.7 FPS, High settings at 29.7 FPS, and Ultra settings at 20.3 FPS. The 4K data shows that this combo is not suited for 4K gaming, as even the lowest preset fails to hold a solid 60 FPS. The progression across resolutions is consistent, with each step up in resolution costing approximately 30-40% of the frame rate. The data also shows that the gap between Low and Ultra settings narrows as resolution increases, indicating that the GPU becomes more resolution-bound at higher pixel counts.

FAQ

Q: What is the highest average FPS achievable with this combo at 1080p?

A: The highest average FPS at 1920x1080 is 126 FPS, achieved with the Low settings preset.

Q: Is this combo capable of 4K gaming in Palworld?

A: No. At 3840x2160, the highest average FPS is 48 FPS on Low settings, which is below the standard 60 FPS target. The Ultra preset at 4K yields only 20.3 FPS, which is unplayable.

Q: How does the CPU's performance compare to its nearest rival?

A: The AMD Ryzen 5 7500F has an average benchmark score of 24993. Its nearest rival, the Intel Core i7-11850H, has an average score of 24974, representing a delta of 0.1%, meaning the Ryzen is marginally faster.

Q: What is the performance difference between Medium and High settings at 1440p?

A: At 2560x1440, the Medium preset averages 68.7 FPS, while the High preset averages 50.1 FPS. This represents a performance drop of 18.6 FPS, or approximately 27%, when moving from Medium to High.

Q: Does the GPU's VRAM capacity limit performance in this game?

A: The GTX 1070 has 8 GB of VRAM. The data shows a severe performance collapse at 4K Ultra (20.3 FPS), which suggests that the combination of memory capacity and bandwidth is insufficient for the highest settings at that resolution, acting as a limiting factor.

Q: Where does this combo rank among all tested configurations for Palworld?

A: This specific combo ranks 1446 out of 1718 tested combos, placing it in the lower portion of the performance spectrum for this game.

CPU Role

The AMD Ryzen 5 7500F provides the computational backbone for this combo, and its performance is more than adequate for Palworld. It features 6 cores and 12 threads, based on the Zen 4 (Raphael) architecture built on a 5 nm process. It has a base clock of 3.70 GHz and a boost clock of 5.00 GHz, with a 32 MB shared L3 cache. The CPU's synthetic benchmarks are strong, with a Cinebench R23 multicore score of 22799 and a single-core score of 3218. This places the CPU in the 82nd percentile of all CPUs, with an average benchmark score of 24993. Its nearest rival, the AMD Ryzen 7 2700X, scores 25057, a delta of -0.3%, indicating the 7500F is essentially on par with that older flagship. In the context of Palworld, the CPU's 6 cores and 12 threads are sufficient to feed the GTX 1070, as the measured FPS data shows a performance pattern that is characteristic of a GPU-bound system. The frame rates scale predictably with resolution and settings, which would not be the case if the CPU were the bottleneck. The data indicates that the CPU's high single-thread performance, as evidenced by its Geekbench single-core score of 2759, helps maintain consistent frame pacing even when the GPU is under heavy load. The CPU's 65W TDP and DDR5 memory support also ensure that it is a modern, efficient platform that will not hold back the GTX 1070 in this title.