Palworld

Palworld

AVERAGE FPS
82
good

This combination provides smooth gameplay with an average of 82 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 29 38 49 61
1440p QHD 52 69 89 110
1080p Full HD 79 104 135 167

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 61
3840x2160 Medium 49
3840x2160 High 38
3840x2160 Ultra 29
2560x1440 Low 110
2560x1440 Medium 89
2560x1440 High 69
2560x1440 Ultra 52
1920x1080 Low 167
1920x1080 Medium 135
1920x1080 High 104
1920x1080 Ultra 79

Palworld with AMD Ryzen 5 9600X + AMD Radeon RX 9060, In-Depth Analysis

Palworld with the AMD Ryzen 5 9600X and AMD Radeon RX 9060 presents a compelling mid-range pairing for a survival title that is notoriously demanding on both CPU and GPU. The measured data reveals a system that can deliver smooth gameplay at 1080p, but which encounters significant strain as resolution increases, highlighting a clear performance hierarchy where the GPU becomes the primary bottleneck. This analysis explores the measured FPS across resolutions and settings, contextualizing the results against the component's individual benchmark standings and nearest rivals.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The resolution scaling data shows a predictable but steep decline in performance as pixel count increases, a trend that strongly indicates the GPU is the limiting factor in this configuration. At 1080p with High settings, the combo achieves an average of 104 FPS, which drops to 69 FPS at 1440p and further to 38 FPS at 4K. This represents a 63% reduction in frame rate from 1080p to 4K, a substantial hit that aligns with the GPU’s mid-range positioning (59th percentile among all GPUs). The scaling pattern is consistent with a graphics card that has sufficient bandwidth for 1080p but struggles to fill the 8.3 million pixels at 4K.

The gap between Low and Ultra settings at each resolution further confirms the GPU-bound nature of the system. At 4K, the average FPS ranges from 61 on Low to just 29 on Ultra, a 52% performance swing. This dramatic variance suggests that the RX 9060’s 8 GB VRAM and 128-bit memory bus are quickly saturated by higher quality textures and effects at 4K. In contrast, the CPU’s 6 cores and 12 threads, which place it in the 81st percentile of all CPUs, are unlikely to be the primary constraint at these higher resolutions, as the frame rate drops correspond more closely to the GPU's rendering load than to any processor limitation.

Interestingly, the gap between 1080p and 1440p is narrower than the gap between 1440p and 4K. At High settings, the drop from 104 to 69 FPS (a 34% reduction) between 1080p and 1440p is less severe than the drop from 69 to 38 FPS (a 45% reduction) between 1440p and 4K. This non-linear scaling suggests that the RX 9060 is operating within its comfort zone at 1080p and 1440p, but hits a VRAM or memory bandwidth wall at 4K, causing a more precipitous decline. The Ultra preset at 4K, yielding only 29 FPS, is essentially unplayable, underscoring that this resolution is beyond the card's practical capabilities for this title.

How This Combo Ranks — use comboRankInGame vs other tested combos

The measured performance places this pairing at rank 1683 out of 2944 tested combos in Palworld, situating it in the middle of the database. This ranking, which equates to roughly the 43rd percentile of all tested system combinations, is notably lower than the individual component percentiles would suggest. The CPU alone sits in the 81st percentile, and the GPU in the 59th, yet their combined performance in this specific game is dragged down by the GPU's limitations at higher resolutions. This discrepancy reveals that Palworld's engine is more sensitive to graphics card performance than to raw CPU power, at least for this particular pairing.

The combo rank reflects the reality that many other tested systems, likely with higher-end GPUs, achieve better frame rates in Palworld. While the Ryzen 5 9600X is a strong processor, its 3DMark and Cinebench scores (e.g., 7590 in 3DMark max threads, 17528.5 in Cinebench R23 multi-core) indicate it is not holding back the system in most scenarios. The bottleneck is the RX 9060, which, despite being a recent RDNA 4.0 architecture card, only manages an average benchmark score of 16014, placing it just ahead of older cards like the Radeon R9 370X and behind the NVIDIA GeForce RTX 3060 Ti in the nearest rivals list.

This ranking suggests that for Palworld specifically, users seeking higher combo rankings would need a more powerful GPU. The data implies that the CPU has headroom to support a faster graphics card, as evidenced by its high percentile ranking and robust multi-threaded performance. However, as configured, the RX 9060 limits the system to a mid-tier standing, making it a balanced but not exceptional performer for this survival title. The rank of 1683 out of 2944 is a clear signal that while the system is capable, it is not optimized for top-tier Palworld performance.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 5 9600X brings 6 cores and 12 threads based on the Zen 5 architecture, running at a base clock of 3.90 GHz and a boost clock of 5.40 GHz. These specifications, combined with a 32 MB shared L3 cache, contribute to its strong single-threaded performance, evidenced by a Geekbench single-core score of 2923 and a Passmark single-thread score of 4570. In Palworld, which is a survival game with significant world simulation and AI logic, single-threaded performance is often critical for maintaining consistent frame times. The CPU's high boost clock likely helps ensure that the game's core simulation thread does not become a bottleneck, particularly at lower resolutions where the GPU is less stressed.

The CPU's multi-threaded capabilities, shown in benchmarks like Cinebench R23 multi-core (17528.5) and Passmark multi-thread (30027), provide ample processing power for background tasks and the game's various systems. However, the measured FPS data reveals that the CPU is not the primary constraint in this combo. At 1080p Low settings, the system achieves 167 FPS, which is a high frame rate that suggests the CPU can feed the GPU adequately. If the CPU were a bottleneck, we would expect to see frame rates plateau or drop significantly at lower resolutions and settings, but the data shows a healthy scaling from 167 FPS at 1080p Low to 110 FPS at 1440p Low, indicating the GPU is still taking on more of the workload.

The relationship between the CPU's performance and the game's results is most evident when comparing the combo ranking to the CPU's individual standing. The 9600X's 81st percentile ranking among all CPUs suggests it has significant headroom, yet the combo ranks lower. This implies that Palworld's performance is more heavily weighted toward GPU throughput. The CPU's 6 cores and 12 threads are sufficient for this title, and its high boost clock of 5.40 GHz ensures that even the most demanding single-threaded tasks are handled efficiently. The data suggests that upgrading the GPU would yield more significant FPS gains than upgrading the CPU for this specific game.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

The measured FPS data provides a comprehensive view of performance across three resolutions and four quality presets. At 1920x1080, the system delivers its best performance, with average frame rates ranging from 167 FPS on Low to 79 FPS on Ultra. The Medium preset achieves 135 FPS with a minimum of 115 FPS and a maximum of 156 FPS, indicating smooth and consistent performance. High settings at 1080p yield 104 FPS, which is excellent for a survival game that often has complex environments. The data shows that 1080p is the sweet spot for this combo, allowing for high refresh rate monitors to be fully utilized even on Ultra settings, although the 79 FPS Ultra result is more modest.

Moving to 2560x1440, the performance remains respectable but shows clear signs of GPU strain. Low settings produce 110 FPS, which is still very playable, while High settings drop to 69 FPS. Medium settings at 1440p achieve 89 FPS with a minimum of 76 FPS and a maximum of 103 FPS, providing a good balance between visual quality and smoothness. Ultra settings at 1440p fall to 52 FPS, which is playable but may not be ideal for fast-paced action. The scaling from 1080p to 1440p is roughly a 33-37% reduction in frame rate across all settings, which is consistent with the increased pixel count and the GPU's bandwidth limitations.

At 3840x2160, the system struggles to maintain playable frame rates. Low settings yield 61 FPS, which is borderline acceptable, but Medium settings drop to 49 FPS with a minimum of 42 FPS. High settings at 4K produce only 38 FPS, and Ultra settings plummet to 29 FPS. These numbers clearly indicate that 4K gaming is not a viable option for this combo, even with the RX 9060's 8 GB of GDDR6 memory and 288.0 GB/s bandwidth. The 4K results are consistently below the 60 FPS threshold considered necessary for smooth gameplay, making this resolution unsuitable for anything but the lowest settings. The data strongly suggests that users should target 1080p or 1440p for an optimal experience.

FAQ — 4-6 Q&A pairs answerable from FACT PACK data

Q: What is the best resolution for this CPU-GPU combo in Palworld?

A: Based on the measured FPS, 1920x1080 is the optimal resolution. At High settings, the combo achieves 104 FPS, and even at Ultra, it maintains 79 FPS. At 1440p, High settings drop to 69 FPS, and at 4K, High settings fall to 38 FPS, making 1080p the only resolution where all presets remain comfortably playable.

Q: How does the RX 9060's performance compare to its nearest rivals?

A: The RX 9060 has an average benchmark score of 16014, which is 0.7% lower than the NVIDIA GeForce RTX 3060 Ti (16129), 1% higher than the AMD Radeon R9 370X (15862), and 1% higher than the AMD Radeon RX 7700 (15852). This places it in a similar performance tier as these cards, despite being a newer architecture.

Q: Is the Ryzen 5 9600X a bottleneck for the RX 9060 in Palworld?

A: The data suggests the CPU is not a bottleneck. The 9600X ranks in the 81st percentile of all CPUs with a 3DMark max threads score of 7590. At 1080p Low settings, the combo achieves 167 FPS, indicating the CPU can feed the GPU effectively. The performance scaling with resolution changes points to the GPU as the limiting component.

Q: What kind of frame rates can I expect at 1440p with Medium settings?

A: At 2560x1440 with Medium settings, the measured average FPS is 89, with a minimum of 76 FPS and a maximum of 103 FPS. This provides a smooth and responsive experience, making it a good choice for users who want a balance between visual quality and performance.

Q: How does the combo rank compared to other tested systems?

A: This specific combo ranks 1683 out of 2944 tested combinations in Palworld. This places it in the middle of the pack, which is lower than the individual component rankings suggest, due to the GPU's limitations at higher resolutions.

Q: Can this system handle 4K gaming in Palworld?

A: The data indicates that 4K gaming is not practical. At 4K with Low settings, the average FPS is 61, but High settings drop to 38 FPS and Ultra to 29 FPS. Only the Low preset approaches playability, and even then, it may not provide a consistently smooth experience.

Settings Recommendations — which preset gives the best experience per the measured rows

For the optimal experience with this combo, the 1080p Medium preset stands out as the best balance of visual fidelity and performance. The measured data shows 135 FPS average with a minimum of 115 FPS and a maximum of 156 FPS, providing a consistently smooth frame rate that exceeds the 60 FPS threshold by a wide margin. This preset likely offers improved textures and effects over Low settings while maintaining high performance. At 1080p High, the 104 FPS average is also excellent, and it may be preferable for users who prioritize visual quality, as the frame rate remains well above playable levels.

At 1440p, the Medium preset is the recommended choice, offering an 89 FPS average with a minimum of 76 FPS. This ensures that the frame rate never drops below the 60 FPS threshold, providing a stable and immersive experience. The High preset at 1440p (69 FPS) is also viable, but the lower minimum frame rates could lead to occasional stutters in demanding scenes. For users with 1080p monitors, the Ultra preset at 79 FPS is a viable option, but the Medium preset's higher average and minimum frame rates make it the safer choice for ensuring smooth gameplay.

For 4K users, the data suggests that only the Low preset is playable, with 61 FPS. However, even this may not be consistent, as the Medium preset drops to 49 FPS. Therefore, the recommendation is to avoid 4K and target 1080p Medium or High, or 1440p Medium, for the best balance of performance and visual quality. The Ultra preset is not recommended at any resolution above 1080p, as the frame rates (52 FPS at 1440p, 29 FPS at 4K) fall below the threshold for smooth gameplay, potentially impacting the experience in this action-oriented survival title.

GPU Role — VRAM, clocks, and how they relate to this game's results

The AMD Radeon RX 9060, based on the Navi 44 chip with RDNA 4.0 architecture, is the primary driver of the performance characteristics seen in Palworld. Its 8 GB of GDDR6 memory on a 128-bit bus provides a bandwidth of 288.0 GB/s, which is sufficient for 1080p and 1440p gaming but becomes a limiting factor at 4K. The GPU's boost clock of 2990 MHz and game clock of 2400 MHz help it deliver a peak FP32 throughput of 21.43 TFLOPS, which is respectable for a mid-range card. However, the measured FPS data reveals that this performance is not enough to maintain high frame rates at higher resolutions in Palworld.

The VRAM capacity is a critical factor in this game's results. At 4K with Ultra settings, the average FPS drops to 29, which is likely due to the 8 GB VRAM being insufficient for the high-resolution textures and effects. The memory bandwidth of 288.0 GB/s also appears to be a constraint, as the frame rate scaling from 1440p to 4K is more severe than the scaling from 1080p to 1440p. This indicates that the GPU is hitting a memory bandwidth wall at 4K, where the increased pixel throughput demands more data than the 128-bit bus can provide. The GPU's 64 ROPs and 1792 shading units are also factors, but the memory subsystem seems to be the primary bottleneck.

The GPU's performance in synthetic benchmarks further contextualizes its in-game results. With a Passmark G3D score of 17631 and a 3DMark Steel Nomad DX12 score of 3322, the RX 9060 demonstrates solid mid-range capabilities. Its percentile ranking of 59 among all GPUs aligns with the observed performance, where it can handle 1080p and 1440p well but struggles at 4K. The GPU's nearest rivals, such as the RTX 3060 Ti, show similar performance levels, confirming that the RX 9060 is a mainstream card not designed for high-resolution, high-detail gaming in demanding titles like Palworld. The data clearly indicates that the GPU's VRAM and bandwidth are the key limiting factors for this combo's performance at higher resolutions.

Hardware Specifications

AMD Ryzen 5 9600X

Cores / Threads 6 / 12
Base Clock 3900 MHz
Boost Clock 5400 MHz
TDP 65W
Socket AMD Socket AM5
View Full CPU Details →

AMD Radeon RX 9060

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 2990 MHz MHz
TDP 132 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 9600X + AMD Radeon RX 9060 in Palworld

Resolution Settings Avg FPS
3840x2160 Low 61.0
3840x2160 Medium 49.0
3840x2160 High 38.0
3840x2160 Ultra 29.0
2560x1440 Low 110.0
2560x1440 Medium 89.0
2560x1440 High 69.0
2560x1440 Ultra 52.0
1920x1080 Low 167.0
1920x1080 Medium 135.0
1920x1080 High 104.0
1920x1080 Ultra 79.0

Palworld with Ryzen 5 9600X + Other GPUs

See how Palworld performs with the same CPU but different graphics cards.

Palworld with RX 9060 + Other CPUs

See how Palworld performs with the same GPU but different processors.

Other Games with Ryzen 5 9600X + RX 9060

Explore FPS benchmarks for other games using this same hardware combination.