Palworld

Resolution Scaling

The measured frame rates for Palworld across three resolutions and four quality presets reveal a system that scales predictably with GPU load, but with some notable inflection points. At 1080p, the AMD Ryzen 5 7600 + NVIDIA GeForce RTX 4070 Ti combination delivers exceptionally high frame rates across all settings. The Low preset reaches 290.1 FPS, Medium drops to 236.8 FPS, High sits at 179.3 FPS, and Ultra falls to 138.2 FPS. These figures indicate that the CPU is not a limiting factor at this resolution, as even the most demanding preset remains well above the refresh rates of typical high-end monitors.

Moving to 1440p, the scaling curve steepens considerably. The Low preset still produces 191.3 FPS, which is a 34% reduction from the 1080p Low result. Medium yields 153.7 FPS, High drops to 117.6 FPS, and Ultra falls to 93.9 FPS. The gap between Low and Ultra at 1440p is roughly 97 FPS, compared to a 152 FPS gap at 1080p. This compression suggests that the GPU is beginning to assert itself as the primary bottleneck, though the CPU still has headroom to feed the graphics card effectively.

At 4K, the picture changes dramatically. The Low preset produces 106.2 FPS, which is still playable, but the scaling from 1440p to 4K represents a 44% drop. Medium delivers 83.8 FPS, High drops to 64.3 FPS, and Ultra falls to 52.5 FPS. The difference between Low and Ultra at 4K is only 53.7 FPS, indicating that the RTX 4070 Ti is now thoroughly saturated. The data shows a clear pattern: the transition from 1080p to 1440p imposes a moderate penalty, while the jump to 4K imposes a severe one. This is characteristic of a GPU-bound scenario at higher resolutions, where the 12 GB GDDR6X memory and 192-bit bus width become increasingly stressed.

The most telling observation is the relationship between presets at each resolution. At 1080p, the drop from Low to Ultra is 152 FPS, which is a 52% reduction. At 4K, the same preset transition only reduces frame rates by 53.7 FPS, a 51% reduction. The proportional consistency suggests that the game's quality settings scale uniformly, but the absolute numbers reveal that the GPU's compute resources—40.09 TFLOPS of FP32 performance—are the limiting factor at 4K Ultra.

GPU Role

The NVIDIA GeForce RTX 4070 Ti is built on the Ada Lovelace architecture with the AD104 chip, fabricated on a 5 nm process at TSMC. The GPU packs 35,800 million transistors into a 294 mm² die, giving it a transistor density of 121.8M per mm². Its base clock runs at 2310 MHz, boosting to 2610 MHz, with memory clocked at 1313 MHz and 21 Gbps effective. The memory subsystem consists of 12 GB of GDDR6X on a 192-bit bus, providing 504.2 GB/s of bandwidth.

In Palworld, the GPU's role becomes increasingly dominant as resolution rises. At 4K Ultra, the 52.5 FPS result places the system near the edge of playability, and the data indicates that the RTX 4070 Ti is the constraining component. The GPU's 60 ray tracing cores and 240 tensor cores are present, but Palworld's primary load appears to be on the 7680 shading units and 240 texture mapping units. The 80 ROPs deliver a pixel rate of 208.8 GPixel/s, which is sufficient for 4K output but not abundant.

The 12 GB VRAM capacity is worth examining in the context of this game. At 4K Ultra, the memory bandwidth of 504.2 GB/s is likely being taxed heavily, as the game's open-world survival environments require large texture sets. The fact that 4K Low produces 106.2 FPS while 4K Ultra produces 52.5 FPS suggests that the quality settings are increasing memory pressure and compute load proportionally. The GPU's 40.09 TFLOPS of FP32 performance is the headline compute figure, and the benchmark results indicate that this is what drives the 4K performance ceiling.

The RTX 4070 Ti's nearest rivals in the benchmark database include the NVIDIA GeForce RTX 5090 Mobile with an average score of 45152 (a -0.6% delta), the Intel Arc A730M at 45592 (-1.5%), the AMD Radeon Pro 580 at 44195 (+1.6%), and the AMD Radeon Pro 5500 XT at 45642 (-1.6%). These deltas are small, indicating that the RTX 4070 Ti sits in a tightly contested performance band. The GPU's percentileVsAllGpus of 85 places it in the upper tier of all tested graphics cards.

CPU Role

The AMD Ryzen 5 7600 is a 6-core, 12-thread processor from the 7000 series, based on the Zen 4 architecture with the Raphael codename. It operates on the AMD Socket AM5 platform, with a base clock of 3.80 GHz and a boost clock of 5.10 GHz. The CPU's 65 W TDP is modest for a desktop part, and its 5 nm TSMC process node with 6,570 million transistors on a 71 mm² die reflects a dense, efficient design. The cache hierarchy includes 64 KB of L1 per core, 1 MB of L2 per core, and 32 MB of shared L3 cache.

In Palworld, the CPU's contribution is most evident at lower resolutions where the GPU is not fully saturated. At 1080p Low, the system achieves 290.1 FPS, a figure that would be impossible if the CPU were a bottleneck. The Ryzen 5 7600's single-thread performance, as measured by its 3dmark_single_thread score of 999, is strong, and its 3dmark_max_threads score of 6503 indicates that it can handle the game's multi-threaded workloads. The CPU's 12 threads are sufficient for Palworld's survival mechanics, which typically involve physics, AI, and world streaming.

The benchmark data shows that the CPU's headroom is substantial. At 1080p Ultra, the system still produces 138.2 FPS, which is more than double the 4K Ultra result. This suggests that even at 1080p Ultra, the GPU is the primary constraint, as the CPU is capable of pushing far beyond this frame rate. The Ryzen 5 7600's 32 MB of shared L3 cache is likely beneficial for the game's world data, and its DDR5 memory support with 83.2 GB/s of bandwidth provides ample data throughput.

The CPU's nearest rivals include the AMD Ryzen 7 5800X3D with an average score of 26574 (a 0.2% delta), the Intel Core i9-12900HK at 26672 (-0.2%), the AMD EPYC 8024P at 26555 (0.2%), and the Intel Core i9-11900K at 26546 (0.3%). These deltas are negligible, indicating that the Ryzen 5 7600 is performance-competitive with a wide range of CPUs. Its percentileVsAllCpus of 83 places it in the upper quartile of all tested processors. The CPU's avgBenchmarkScore of 26617 is nearly identical to its rivals, reinforcing the notion that the Ryzen 5 7600 is a well-balanced part.

FAQ

Q: What is the highest average FPS this combo achieves in Palworld?

A: The highest measured average FPS is 290.1 at 1080p with Low settings. This is followed by 236.8 at 1080p Medium and 191.3 at 1440p Low.

Q: How does the combo perform at 4K Ultra settings?

A: At 3840x2160 with Ultra settings, the system achieves an average of 52.5 FPS. This is above the 50 FPS threshold but below the 60 FPS target, indicating that the GPU is the limiting factor at this resolution.

Q: Is the CPU or GPU the bottleneck in Palworld?

A: The data indicates that the GPU becomes the bottleneck at higher resolutions. At 1080p, the CPU has significant headroom, as evidenced by the 290.1 FPS Low result. At 4K, the GPU is fully saturated, with Ultra settings dropping to 52.5 FPS.

Q: How does the RTX 4070 Ti compare to its nearest GPU rivals?

A: The RTX 4070 Ti's average benchmark score is 44900, which is 0.6% lower than the RTX 5090 Mobile, 1.5% lower than the Intel Arc A730M, 1.6% higher than the AMD Radeon Pro 580, and 1.6% lower than the AMD Radeon Pro 5500 XT.

Q: What is the combo's overall ranking in the game benchmark database?

A: The combo ranks 232 out of 1718 tested combinations, placing it in the top 13.5% of all tested systems for Palworld.

Q: Does the Ryzen 5 7600's performance justify its 6-core configuration?

A: The CPU's Cinebench R23 multicore score of 22992 and single-core score of 3246 indicate strong performance. In Palworld, the 12 threads are sufficient, as the game does not appear to require more than 6 cores to maintain high frame rates at 1080p.

How This Combo Ranks

The AMD Ryzen 5 7600 + NVIDIA GeForce RTX 4070 Ti combination ranks 232 out of 1718 tested combos in Palworld, placing it in the top 13.5% of all systems tested. This is a strong result, but it is not at the very top of the leaderboard, which suggests that the combo is well-balanced but not extreme in any one dimension.

The ranking implies that there are 231 combos that outperform this pairing in Palworld, likely featuring higher-end CPUs and GPUs. However, the 1718 total combos mean that the vast majority of systems—over 86%—perform worse. The data indicates that this combo is capable of delivering high frame rates at 1080p and 1440p, with playable performance at 4K on lower settings.

The ranking also reflects the balance between the Ryzen 5 7600 and the RTX 4070 Ti. The CPU's percentileVsAllCpus of 83 and the GPU's percentileVsAllGpus of 85 are closely aligned, meaning that neither component is dramatically stronger or weaker than the other. This balance is beneficial in Palworld, where the game's demands shift between CPU and GPU depending on resolution and settings.

In practical terms, the combo's rank of 232 suggests that it is a high-performing system for Palworld, but not a top-tier one. The 4K Ultra result of 52.5 FPS is the weakest point, but the 1080p results are excellent. The data shows that this combo is best suited for high-refresh-rate gaming at 1080p and 1440p, with 4K playable at reduced settings. The ranking is a reflection of this capability, placing it in the upper echelon of tested systems without reaching the absolute peak.