Palworld

Palworld

AVERAGE FPS
77
good

This combination provides smooth gameplay with an average of 77 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 26 34 45 59
1440p QHD 52 68 83 104
1080p Full HD 72 98 131 156

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 59
3840x2160 Medium 45
3840x2160 High 34
3840x2160 Ultra 26
2560x1440 Low 104
2560x1440 Medium 83
2560x1440 High 68
2560x1440 Ultra 52
1920x1080 Low 156
1920x1080 Medium 131
1920x1080 High 98
1920x1080 Ultra 72

Palworld with AMD Ryzen 5 7500F + AMD Radeon RX 7600 XT, In-Depth Analysis

# Palworld with AMD Ryzen 5 7500F + AMD Radeon RX 7600 XT

The Palworld benchmark data for this combo shows a system that delivers playable frame rates across most resolution and settings combinations, but with a clear performance ceiling that emerges at higher resolutions. The measured FPS ranges from 156 frames per second at 1080p Low down to 26.3 frames per second at 4K Ultra, demonstrating a wide operating envelope that depends heavily on both resolution and graphical preset. This analysis breaks down the scaling behavior, component roles, and overall ranking of this particular hardware pairing.

Resolution Scaling

The FPS drop from 1080p to 4K is substantial and reveals where the bottleneck shifts. At 1080p High, the combo produces 98.4 FPS, while at 1440p High it drops to 67.9 FPS, and at 4K High it falls to 34.3 FPS. That represents a 65% reduction in frame rate from 1080p to 4K at High settings. The scaling pattern is consistent with a GPU-limited scenario at higher resolutions, as the pixel count increases fourfold from 1080p to 4K, and the frame rate drops by roughly two-thirds.

The Low settings tier shows the least severe scaling: 156 FPS at 1080p, 103.8 FPS at 1440p, and 58.5 FPS at 4K. This still represents a 62.5% drop from 1080p to 4K, indicating that even at Low settings, the GPU is the primary limiter at 4K. However, the 1080p Low result of 156 FPS suggests that at lower resolutions, the CPU has enough headroom to push well beyond 144 FPS, which is notable for a 6-core processor.

The Ultra settings tier exhibits the steepest scaling curve: 72.4 FPS at 1080p, 51.7 FPS at 1440p, and 26.3 FPS at 4K. The gap between 1080p and 1440p Ultra is 28.6%, while the gap from 1440p to 4K Ultra is 49.1%. This accelerating drop at higher resolutions points to a GPU that becomes increasingly overwhelmed as both resolution and settings demand more from the rendering pipeline. The 4K Ultra result of 26.3 FPS is below the generally accepted threshold for smooth gameplay, suggesting that this combo is not viable for maximum settings at 4K.

GPU Role

The AMD Radeon RX 7600 XT is the dominant factor in determining Palworld performance at higher resolutions. The GPU features 16 GB of GDDR6 memory on a 128-bit bus, providing 288.0 GB/s of bandwidth. With a base clock of 1980 MHz and a boost clock of 2755 MHz, the card also runs at a game clock of 2470 MHz. These specifications place it in the mid-range segment, and the benchmark data confirms this positioning.

The GPU's 16 GB memory capacity is particularly relevant for Palworld, which is a survival game with large open-world environments that can consume significant video memory. At 4K Ultra settings, the game demands more from the GPU, and the 34.3 FPS at 4K High versus 26.3 FPS at 4K Ultra shows a 23.3% performance cost for moving from High to Ultra at that resolution. The memory bandwidth of 288.0 GB/s appears sufficient to avoid stuttering, but the raw compute power limits the card from maintaining higher frame rates at 4K.

The RX 7600 XT's benchmark scores place it in the 63rd percentile among all GPUs, with an average benchmark score of 20146. Its nearest rivals include the AMD Radeon RX 7600 (deltaPct -0.6%), the NVIDIA GeForce RTX 2060 SUPER (deltaPct 1.9%), and the NVIDIA GeForce RTX 3070 Mobile (deltaPct -1.9%). These close margins indicate that the RX 7600 XT performs within a narrow band of comparable cards, with no single rival being more than 1.9% faster or slower in aggregate benchmarks. In Palworld specifically, the measured FPS shows that the GPU is the limiting factor at 4K, where even the Low preset only achieves 58.5 FPS.

CPU Role

The AMD Ryzen 5 7500F provides the processing foundation for this combo, featuring 6 cores and 12 threads based on the Zen 4 architecture. With a base clock of 3.70 GHz and a boost clock of 5.00 GHz, this processor offers strong single-threaded performance, which is critical for Palworld's game logic and physics calculations. The CPU's 32 MB of shared L3 cache helps with data locality in the large open world.

The CPU benchmark data shows a Cinebench R23 multicore score of 22799 and a single-core score of 3218, indicating solid all-around performance. The processor sits in the 82nd percentile among all CPUs, with an average benchmark score of 24993. Its nearest rivals include the Intel Core i7-11850H (deltaPct 0.1%), the AMD Ryzen 7 2700X (deltaPct -0.3%), and the AMD Ryzen 5 8400F (deltaPct -0.3%). These extremely tight margins, all within 0.4% of the 7500F, suggest that the CPU's performance is well-matched against these alternatives.

In Palworld specifically, the CPU's role becomes more apparent at lower resolutions. At 1080p Low, the 156 FPS result indicates that the CPU can drive high frame rates when the GPU is not the bottleneck. However, as resolution increases, the GPU takes over as the limiting factor. The 1080p Ultra result of 72.4 FPS versus the 1080p High result of 98.4 FPS shows that settings changes at the same resolution have a significant impact, which is more attributable to GPU workload than CPU limitations. The CPU's boost clock of 5.00 GHz provides sufficient headroom for Palworld's frequently updating world state, but the data does not show the CPU becoming a primary constraint at any tested resolution.

How This Combo Ranks

This combination of AMD Ryzen 5 7500F and AMD Radeon RX 7600 XT ranks at position 1120 out of 1718 tested combos in Palworld, placing it in the 65th percentile of all tested hardware pairings. This ranking reflects the mid-range positioning of both components, with the GPU's 63rd percentile and the CPU's 82nd percentile contributing to the overall standing.

The ranking suggests that while this combo is not at the top tier for Palworld, it is also far from the bottom. The 1080p results demonstrate that this system can handle the game at high frame rates for most settings, with 98.4 FPS at High and 72.4 FPS at Ultra. At 1440p, the combo remains playable with 67.9 FPS at High, but the 4K results drop below 60 FPS for all settings except Low. The 4K High result of 34.3 FPS places this combo firmly in the territory where users would need to adjust settings or resolution to achieve smooth gameplay.

The ranking also indicates that many other combos perform better, which is expected given the RX 7600 XT's mid-range status. However, the tight deltaPct values against its nearest GPU rivals (all within 1.9%) suggest that the performance difference between this combo and similar alternatives is marginal. The CPU's position in the 82nd percentile helps ensure that the GPU is not held back by processor limitations, particularly at lower resolutions where the CPU has more influence on frame rates.

FAQ

Q: What is the best resolution and settings combination for this system in Palworld?

A: The data shows that 1080p High (98.4 FPS) and 1440p High (67.9 FPS) are the strongest options for smooth gameplay. At 4K, only the Low preset (58.5 FPS) approaches playable frame rates, while Ultra at 4K drops to 26.3 FPS.

Q: How does this combo compare to the RX 7600 XT's nearest GPU rivals?

A: The RX 7600 XT is 0.6% behind the RX 7600, 1.9% ahead of the RTX 2060 SUPER, and 1.9% behind the RTX 3070 Mobile in average benchmark scores. These differences are minimal, indicating similar performance across these cards.

Q: Is the CPU or GPU the limiting factor in Palworld?

A: At 1080p Low (156 FPS), the CPU has enough headroom to push high frame rates. As resolution increases to 1440p and 4K, the GPU becomes the primary limiter, with FPS dropping consistently across all settings at each higher resolution.

Q: What is the system's overall ranking among tested combos for Palworld?

A: This combo ranks 1120th out of 1718 tested combinations, placing it in the 65th percentile of all tested hardware pairings for Palworld.

Q: Can this system handle 4K gaming in Palworld?

A: The 4K Low preset achieves 58.5 FPS, which is playable, but 4K Medium (44.9 FPS), High (34.3 FPS), and Ultra (26.3 FPS) all fall below 60 FPS. Users seeking 4K would need to use Low settings.

Q: How does the CPU's performance compare to its nearest rivals?

A: The Ryzen 5 7500F is 0.1% behind the Intel Core i7-11850H, 0.3% behind the AMD Ryzen 7 2700X, and 0.3% behind the AMD Ryzen 5 8400F in average benchmark scores. All rivals are within 0.4% of the 7500F, showing very similar CPU performance.

Hardware Specifications

AMD Ryzen 5 7500F

Cores / Threads 6 / 12
Base Clock 3700 MHz
Boost Clock 5000 MHz
TDP 65W
Socket AMD Socket AM5
View Full CPU Details →

AMD Radeon RX 7600 XT

VRAM 16 GB GDDR6
Base Clock —
Boost Clock 2755 MHz MHz
TDP 190 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 7500F + AMD Radeon RX 7600 XT in Palworld

Resolution Settings Avg FPS
3840x2160 Low 58.5
3840x2160 Medium 44.9
3840x2160 High 34.3
3840x2160 Ultra 26.3
2560x1440 Low 103.8
2560x1440 Medium 83.1
2560x1440 High 67.9
2560x1440 Ultra 51.7
1920x1080 Low 156.0
1920x1080 Medium 130.6
1920x1080 High 98.4
1920x1080 Ultra 72.4

Palworld with Ryzen 5 7500F + Other GPUs

See how Palworld performs with the same CPU but different graphics cards.

Palworld with RX 7600 XT + Other CPUs

See how Palworld performs with the same GPU but different processors.

Other Games with Ryzen 5 7500F + RX 7600 XT

Explore FPS benchmarks for other games using this same hardware combination.