Palworld

The AMD Ryzen 5 7400F paired with the NVIDIA GeForce RTX 5090 D delivers a compelling Palworld experience, with measured frame rates that scale predictably across resolutions and settings. This combination sits at rank 33 out of 2944 tested combos in the database, placing it in the top 1.1% of all configurations tested for this game. The data shows that this pairing is heavily GPU-limited at higher resolutions, while the six-core, twelve-thread Zen 4 processor provides ample headroom at 1080p.

Resolution Scaling

The measured FPS data reveals a clear and consistent scaling pattern as resolution increases from 1920x1080 to 3840x2160. At High settings, the average frame rate drops from 239 FPS at 1080p to 157 FPS at 1440p, a reduction of 82 FPS or roughly 34%. Moving to 4K, the average falls further to 87 FPS, which represents a 64% decrease from the 1080p figure. This steep decline indicates that the RTX 5090 D, with its 32 GB of GDDR7 memory on a 512-bit bus delivering 1.79 TB/s of bandwidth, is being pushed progressively harder as pixel count grows, and the scaling is nearly linear with the increase in total pixels.

At Low settings, the resolution scaling is even more dramatic. The average FPS at 1080p is 347, dropping to 252 at 1440p and then to 140 at 4K. The 1080p to 1440p drop of 95 FPS (27%) is followed by a 1440p to 4K drop of 112 FPS (44%). This larger relative drop at 4K Low suggests that even at minimal graphical load, the sheer pixel throughput required at 3840x2160 begins to strain the GPU's rendering pipeline, despite its 104.8 TFLOPS of FP32 compute power and 1,636.8 GTexel/s texture rate.

Medium settings show a similar trend but with slightly different magnitudes. At 1080p, the average is 311 FPS, falling to 205 at 1440p and 114 at 4K. The 1440p to 4K reduction here is 91 FPS (44%), which aligns closely with the Low setting pattern. Notably, the Medium preset is the only one in the measured data that includes minimum and maximum frame values: 264 to 357 at 1080p, 174 to 235 at 1440p, and 96 to 131 at 4K. These ranges show that frame pacing remains stable, with the spread between min and max narrowing as resolution increases, indicating that the GPU is becoming the consistent bottleneck rather than CPU-side hitches.

Ultra settings present the steepest scaling curve. The average FPS starts at 181 at 1080p, drops to 119 at 1440p (a 34% reduction), and falls to 66 at 4K (a 45% reduction from 1440p). The 1080p to 4K overall decline is 115 FPS, or 64%, which mirrors the High setting's percentage drop. This consistency suggests that the relative performance cost of Ultra over High is maintained across resolutions, with the RTX 5090 D's 21,760 shading units and 176 ROPs handling the additional effects load proportionally.

The scaling data points to the CPU as the limiting factor at 1080p, particularly at Low and Medium settings where frame rates exceed 300 FPS. The Ryzen 5 7400F, with its 3.70 GHz base clock and 4.70 GHz boost clock, can drive these high frame rates, but the 347 FPS at 1080p Low is likely approaching the practical ceiling for this processor in Palworld. At 4K, however, all settings show the GPU taking over as the primary constraint, with even Low settings unable to exceed 140 FPS. This indicates that players targeting 4K will see the RTX 5090 D fully utilized, while those at 1080p may find the CPU limiting their maximum achievable frame rate.

Settings Recommendations

The measured FPS data across the four presets (Low, Medium, High, Ultra) at each resolution provides clear guidance for optimal settings. At 4K, the High preset delivers an average of 87 FPS, which is playable for most users, while Ultra drops to 66 FPS and Medium sits at 114 FPS. The jump from Medium to High at 4K costs 27 FPS (from 114 to 87), while High to Ultra costs 21 FPS (from 87 to 66). Given that the RTX 5090 D is among the most powerful GPUs available, the data suggests that 4K Medium offers the best balance of visual fidelity and frame rate, with 114 FPS providing smooth gameplay without the substantial frame rate penalty of High or Ultra.

At 1440p, the situation is more favorable for higher presets. High settings achieve 157 FPS, which is well above the 144 Hz refresh rate common on many monitors. Medium delivers 205 FPS, and Low reaches 252 FPS. Ultra at 119 FPS is still playable but falls below the 144 FPS threshold. For 1440p users, the data indicates that High is the sweet spot, offering a 38 FPS improvement over Ultra while maintaining frame rates that exceed most high-refresh displays. Players with 240 Hz monitors might prefer Medium, as the 205 FPS average provides headroom above 200 FPS.

At 1080p, the Ryzen 5 7400F becomes the bottleneck. The Low preset achieves 347 FPS, Medium 311 FPS, High 239 FPS, and Ultra 181 FPS. The drop from Medium to High is 72 FPS, which is substantial, while High to Ultra costs 58 FPS. For competitive play, Medium at 311 FPS offers excellent responsiveness, but the visual difference between Medium and High is significant in Palworld's open world. The data suggests that 1080p High at 239 FPS is the recommended choice, as it remains above 240 Hz thresholds while providing better visual quality than Medium. Ultra at 181 FPS is still smooth but represents a 24% reduction from High, making it less appealing unless maximum visual fidelity is the priority.

The measured minimum and maximum frame rates for Medium settings provide additional context. At 1080p, the 264 FPS minimum is still very high, while the 357 FPS maximum shows some variance. At 1440p, the 174 FPS minimum is close to the 144 Hz mark, and at 4K, the 96 FPS minimum is just above 90 FPS. This data indicates that Medium settings maintain consistent frame delivery without major dips, making it a safe choice for players who prioritize smoothness over peak frame rates.

FAQ

Q: What is the average FPS at 4K with Ultra settings?

A: The measured average FPS at 3840x2160 with Ultra settings is 66 FPS. This is the lowest average across all tested configurations, indicating that Ultra at 4K pushes the RTX 5090 D to its limits in Palworld.

Q: Does the Ryzen 5 7400F bottleneck the RTX 5090 D at 1080p?

A: Benchmark results indicate that at 1920x1080 with Low settings, the average FPS reaches 347, which suggests the CPU is the limiting factor at this resolution. The processor's 6 cores and 12 threads with a 4.70 GHz boost clock appear to cap frame rates below what the GPU could theoretically deliver.

Q: What is the FPS difference between Low and Ultra at 1440p?

A: At 2560x1440, the Low preset averages 252 FPS while Ultra averages 119 FPS, a difference of 133 FPS. This represents a 53% reduction in frame rate when moving from Low to Ultra at this resolution.

Q: How does the combo rank among all tested configurations in Palworld?

A: The AMD Ryzen 5 7400F + NVIDIA GeForce RTX 5090 D combination ranks 33rd out of 2944 tested combos in the database, placing it in the top 1.1% of all configurations tested for this game.

Q: What are the minimum and maximum FPS values recorded for Medium settings at 4K?

A: For 3840x2160 Medium settings, the measured minimum FPS is 96 and the maximum is 131, with an average of 114 FPS. This range indicates stable frame delivery without significant dips.

Q: Is the RTX 5090 D's performance closer to which rival GPU in overall benchmarks?

A: The RTX 5090 D's average benchmark score is 77712, which is 1.1% higher than the AMD Radeon RX 6650M XT (76904) and 1.6% lower than the AMD Radeon RX 6850M XT (78940). The data shows it is also 2.1% below the NVIDIA Tesla P100 PCIe 12 GB.

Measured FPS Breakdown

At 1920x1080, the measured frame rates span a wide range depending on settings. Low settings produce the highest average at 347 FPS, followed by Medium at 311 FPS (with a minimum of 264 and maximum of 357), High at 239 FPS, and Ultra at 181 FPS. The spread from Low to Ultra is 166 FPS, which is the largest across all resolutions. This wide range indicates that the CPU-GPU combination has substantial headroom at 1080p, with the Ryzen 5 7400F capable of driving very high frame rates when the GPU is not fully taxed. The Medium preset's minimum of 264 FPS shows that even in demanding scenes, frame rates remain well above typical high-refresh display thresholds.

At 2560x1440, the averages are 252 FPS for Low, 205 FPS for Medium (minimum 174, maximum 235), 157 FPS for High, and 119 FPS for Ultra. The difference between Low and Ultra narrows to 133 FPS, reflecting the increased GPU workload at this resolution. The Medium preset's minimum of 174 FPS is notable, as it stays above 144 Hz, making it a viable option for high-refresh 1440p monitors. High settings at 157 FPS also exceed 144 Hz, while Ultra at 119 FPS falls below that threshold. The data suggests that 1440p is the resolution where the RTX 5090 D's power is most effectively utilized, as even Medium settings deliver excellent performance.

At 3840x2160, the averages drop significantly: Low at 140 FPS, Medium at 114 FPS (minimum 96, maximum 131), High at 87 FPS, and Ultra at 66 FPS. The Low to Ultra spread is 74 FPS, indicating that 4K is heavily GPU-bound. Even Low settings cannot reach the frame rates seen at lower resolutions, as the pixel throughput requirement of 3840x2160 consumes most of the GPU's resources. The Medium preset's minimum of 96 FPS is close to the 90 FPS threshold, and High at 87 FPS dips below 90 FPS, which may be noticeable on displays with VRR. Ultra at 66 FPS is playable but represents the lowest measured performance in this dataset.

The RTX 5090 D's specifications help explain these results. With 32 GB of GDDR7 memory, a 512-bit bus, and 1.79 TB/s bandwidth, the GPU has ample memory bandwidth for 4K textures. Its 104.8 TFLOPS FP32 performance and 1,636.8 GTexel/s texture rate provide substantial compute and texturing capabilities. The 176 ROPs and 423.6 GPixel/s pixel rate handle the rasterization workload, but the 4K data shows that even this powerful GPU cannot maintain high frame rates at Ultra settings in Palworld's open world.

How This Combo Ranks

The AMD Ryzen 5 7400F + NVIDIA GeForce RTX 5090 D combination achieves a rank of 33 out of 2944 tested combos in Palworld. This places it in the 98.9th percentile of all configurations tested, meaning it outperforms approximately 98.9% of all other CPU-GPU pairings in this game. The rank reflects the RTX 5090 D's position as one of the most powerful GPUs available, with its 92nd percentile score across all GPUs in the database.

The GPU's nearest rivals in overall benchmark scores provide context for its performance tier. The RTX 5090 D has an average benchmark score of 77712, which is 1.1% higher than the AMD Radeon RX 6650M XT (76904) and 0.2% lower than the AMD Radeon RX 6850M XT (78940). It also trails the NVIDIA Tesla P100 PCIe 12 GB (79396) by 2.1% and the NVIDIA Tesla P100 PCIe 16 GB (79605) by 2.4%. These comparisons are based on aggregate benchmark scores, and in Palworld specifically, the combo's rank of 33 suggests that the RTX 5090 D performs exceptionally well, though the game's engine may not fully utilize all of its compute resources.

The CPU's performance tier also contributes to the combo's ranking. The Ryzen 5 7400F has an average benchmark score of 32750, placing it in the 83rd percentile among all CPUs. Its nearest rivals include the Intel Core i5-14600T (32707, 0.1% lower), Intel Core Ultra 7 155H (32697, 0.2% lower), AMD Ryzen 7 PRO 6850H (32812, 0.2% higher), and AMD Ryzen AI 7 PRO 360 (32662, 0.3% lower). These close scores indicate that the 7400F is competitive with mid-range and some high-end mobile processors, though it is not a top-tier CPU by aggregate benchmarks. In Palworld, the CPU's role becomes more significant at 1080p, where the data shows frame rates exceeding 300 FPS, suggesting the processor can keep pace with the GPU's output.

The combo's rank of 33 out of 2944 is particularly notable given that the RTX 5090 D's GPU-level percentile is 92, while the CPU's percentile is 83. This suggests that Palworld is more GPU-dependent than CPU-dependent, as the combo's overall rank (98.9th percentile) is higher than either component's individual percentile. The game's open world and creature-collection mechanics likely benefit from the GPU's massive memory bandwidth and compute capabilities, while the CPU's six cores are sufficient for the game's simulation and physics workloads.

CPU Role

The AMD Ryzen 5 7400F is a 6-core, 12-thread processor based on the Zen 4 architecture (codenamed Raphael), manufactured on TSMC's 5 nm process. It has a base clock of 3.70 GHz and a boost clock of 4.70 GHz, with a 65 W TDP. The processor features 64 KB of L1 cache per core, 1 MB of L2 cache per core, and 32 MB of shared L3 cache. It supports DDR5 memory in dual-channel configuration with a bandwidth of 83.2 GB/s. The CPU's benchmark scores include a Cinebench R23 multi-core score of 21765 and a single-core score of 3072, along with a PassMark multi-thread score of 25645 and a single-thread score of 3689.

In Palworld, the CPU's role is most evident at 1080p, where the measured frame rates approach or exceed 300 FPS at Low and Medium settings. The 347 FPS at 1080p Low indicates that the 7400F can drive frame rates that are limited by the game's engine or the GPU's rendering pipeline, not by CPU throughput. The processor's 4.70 GHz boost clock and 32 MB of L3 cache likely contribute to its ability to maintain high frame rates in a game that involves numerous AI-driven creatures and world simulation. The six cores and twelve threads provide enough parallelism for the game's main thread and background tasks, though the data does not show signs of CPU bottlenecking at higher resolutions.

The CPU's Cinebench R20 scores of 9141 multi-core and 1290 single-core, along with its PassMark integer math score of 74745 and floating point math score of 45799, indicate balanced performance across different workload types. In Palworld, the game's physics and AI systems likely rely on integer and floating point operations, and the 7400F's scores suggest it handles these tasks efficiently. The PassMark data compression score of 289999 and encryption score of 16712 are less relevant to gaming, but they confirm the processor's overall capability.

The 7400F's memory support for DDR5 and 83.2 GB/s bandwidth may also influence Palworld performance, particularly in open-world scenarios where asset streaming and world data access are frequent. The dual-channel memory configuration provides adequate bandwidth for the game's data demands, though the RTX 5090 D's 1.79 TB/s memory bandwidth dwarfs the CPU's memory throughput. This disparity explains why the GPU becomes the limiting factor at 4K, where the game's texture and geometry data are primarily processed by the GPU's memory subsystem.

The processor's architecture and specifications align with its measured performance in Palworld. The 6-core, 12-thread configuration is sufficient for a game that does not heavily utilize multi-threading, and the high boost clock ensures strong single-thread performance for the game's main loop. The 65 W TDP and AM5 socket are typical for mid-range desktop processors, and the CPU's 83rd percentile ranking among all CPUs indicates it is a competent performer for gaming workloads. In this combo, the 7400F provides enough CPU headroom to avoid bottlenecking the RTX 5090 D at 4K and 1440p, while at 1080p, it sets an upper bound on frame rates that is still exceptionally high.