Palworld
This combination delivers exceptional performance with an average of 186 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 66 | 87 | 114 | 140 |
| 1440p QHD | 119 | 157 | 205 | 252 |
| 1080p Full HD | 181 | 239 | 311 | 355 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Palworld with AMD Ryzen 7 7800X3D + NVIDIA GeForce RTX 5090 D, In-Depth Analysis
# Palworld Performance Analysis: AMD Ryzen 7 7800X3D + NVIDIA GeForce RTX 5090 D
The combination of the AMD Ryzen 7 7800X3D and NVIDIA GeForce RTX 5090 D delivers a robust Palworld experience across all tested resolutions, with the data showing a clear progression from 355 FPS at 1080p Low to 66 FPS at 4K Ultra. This pairing ranks 30th out of 2,944 tested combos, placing it in the top 1% of all configurations, though the scaling patterns reveal that the GPU becomes the primary limiting factor as resolution increases, while the CPU's 3D V-Cache architecture demonstrates exceptional strength at lower resolutions where frame rates push past 300 FPS.
Resolution Scaling
Examining the measured FPS across the three tested resolutions reveals a consistent and predictable drop as pixel count increases, but the rate of decline varies significantly depending on the quality preset. At Low settings, the average frame rate falls from 355 FPS at 1920x1080 to 252 FPS at 2560x1440, a 29% reduction, and then to 140 FPS at 3840x2160, another 44% drop from 1440p. This steep decline at 4K indicates that the RTX 5090 D's rendering workload is scaling nearly linearly with pixel count, a hallmark of GPU-bound scenarios where the processor has ample headroom.
The Medium preset tells a similar story with slightly more moderate percentages: 311 FPS at 1080p drops to 205 FPS at 1440p (34% reduction) and then to 114 FPS at 4K (44% further reduction). Interestingly, the High preset shows a shallower first step, moving from 239 FPS at 1080p to 157 FPS at 1440p (34% drop), but then a larger second step to 87 FPS at 4K (45% drop). The Ultra preset follows the most dramatic curve: 181 FPS at 1080p, 119 FPS at 1440p (34% reduction), and 66 FPS at 4K (45% reduction).
The consistency of these percentage drops across presets—roughly one-third from 1080p to 1440p and another 44-45% from 1440p to 4K—strongly suggests that Palworld's rendering pipeline is pixel-bound at these resolutions. The RTX 5090 D's 32 GB of GDDR7 memory and 1.79 TB/s bandwidth are clearly sufficient, as no sudden memory-related cliffs appear in the data. The limiting component at 1080p and 1440p is more nuanced: at 1080p Low with 355 FPS, the Ryzen 7 7800X3D's 8 cores and 16 threads are likely approaching their practical limit for this game's draw call throughput, while at 4K the GPU's raw compute—104.8 TFLOPS FP32—becomes the binding constraint.
FAQ
Q: What is the maximum average frame rate this combo achieves in Palworld?
A: The highest recorded average is 355 FPS at 1920x1080 with Low settings. This represents the absolute ceiling for this configuration, likely limited by CPU performance rather than GPU capability, given the massive headroom the RTX 5090 D has at this resolution.
Q: Is the RTX 5090 D's 32 GB VRAM a factor in Palworld's performance?
A: The data shows no evidence of VRAM limitations. The frame rates scale consistently with resolution and settings without any anomalous drops that would indicate memory capacity or bandwidth constraints. The 1.79 TB/s memory bandwidth appears more than adequate for this title.
Q: How does the Ultra preset at 4K compare to High at 1440p?
A: Ultra at 3840x2160 delivers 66 FPS average, while High at 2560x1440 delivers 157 FPS. The 1440p High configuration provides 138% higher frame rate, suggesting that for players prioritizing smoothness over maximum visual fidelity, the lower resolution with High settings is preferable.
Q: What is the frame rate difference between Low and Ultra at each resolution?
A: At 1080p, Low produces 355 FPS versus 181 FPS on Ultra, a 96% difference. At 1440p, the gap is 252 FPS versus 119 FPS, a 112% difference. At 4K, Low yields 140 FPS versus 66 FPS on Ultra, a 112% difference. The consistent gap indicates settings scale predictably across resolutions.
Q: Does this combo rank among the best tested configurations for Palworld?
A: Yes, it ranks 30th out of 2,944 tested combos, placing it in the top 1.02% of all configurations. This reflects the strong synergy between the Ryzen 7 7800X3D's 96 MB of shared L3 cache and the RTX 5090 D's high-end Blackwell architecture.
Q: What is the minimum FPS recorded in the measured data?
A: The only min FPS values provided are for Medium settings: 96 FPS at 4K, 174 FPS at 1440p, and 264 FPS at 1080p. The absence of min FPS for other presets means frame-time consistency at Low, High, and Ultra cannot be assessed from this data.
GPU Role
The NVIDIA GeForce RTX 5090 D serves as the primary rendering engine for Palworld, and its specifications align with the observed performance. The GPU's 32 GB of GDDR7 memory on a 512-bit bus provides 1.79 TB/s of bandwidth, which is more than sufficient for this title's texture and geometry requirements at any tested configuration. The memory clock runs at 1750 MHz (28 Gbps effective), and with 21,760 shading units operating at a boost clock of 2407 MHz, the card delivers 104.8 TFLOPS of FP32 compute.
The RTX 5090 D's 170 RT cores and 680 tensor cores suggest capability for ray-traced or DLSS-enhanced workloads, though the measured data does not include any such settings—all rows are standard rasterization presets. The 176 ROPs produce a pixel rate of 423.6 GPixel/s, which directly impacts fill-rate-bound scenarios at 4K. The 1,636.8 GTexel/s texture rate from 680 TMUs supports the high texture detail levels Palworld requires.
At 4K Ultra, the GPU's workload pushes the system to 66 FPS average, indicating that this setting combination is particularly demanding. The drop from 119 FPS at 1440p Ultra to 66 FPS at 4K Ultra represents a 45% reduction, which aligns with the pixel count increase from 3.7 million to 8.3 million pixels (2.25x). The sub-linear scaling suggests some efficiency gains at higher resolutions, likely from reduced CPU overhead per pixel. The RTX 5090 D's 575 W TDP and dual-slot design indicate this is a high-power part, but the measured frame rates justify the power envelope for users seeking maximum Palworld performance.
How This Combo Ranks
The combo ranking of 30th out of 2,944 tested configurations places this pairing firmly in the elite tier for Palworld. The percentile position—top 1%—reflects the combined strength of the Ryzen 7 7800X3D and RTX 5090 D. The CPU's average benchmark score of 33,079 puts it at the 83rd percentile among all processors, with its nearest rivals being the AMD Ryzen 7 8700G and Intel Core i7-13650HX (both at 33,089, 0% delta) and the AMD Ryzen 7 7745HX (33,091, 0% delta). The Ryzen 9 PRO 6950H scores slightly higher at 33,201 but shows a -0.4% delta, indicating the 7800X3D is essentially tied with these competitors in aggregate CPU benchmarks.
On the GPU side, the RTX 5090 D's average benchmark score of 77,712 places it at the 92nd percentile among all GPUs. Its nearest rivals include the AMD Radeon RX 6650M XT (76,904, 1.1% delta), which actually scores lower, and the RX 6850M XT (78,940, -1.6% delta), which scores higher. The NVIDIA Tesla P100 variants (79,396 and 79,605) also outperform it by 2.1% and 2.4% respectively. This suggests the RTX 5090 D, while powerful, is not the absolute peak in synthetic GPU benchmarks, yet its Palworld performance still achieves a top-30 combo ranking.
The gap between the 83rd CPU percentile and 92nd GPU percentile indicates the GPU contributes more to this combo's high ranking, but the CPU's 3D V-Cache design provides the low-latency memory access that Palworld's open-world environments likely benefit from at high frame rates.
Measured FPS Breakdown
At 1920x1080, the data shows four settings tiers with substantial separation. Low settings achieve 355 FPS average, Medium reaches 311 FPS (with min 264, max 357), High delivers 239 FPS, and Ultra drops to 181 FPS. The step from Low to Medium is 44 FPS (12.4% reduction), Medium to High is 72 FPS (23.2% reduction), and High to Ultra is 58 FPS (24.3% reduction). This pattern suggests each settings tier adds meaningful visual complexity, with the largest absolute gap between Medium and High.
At 2560x1440, the same settings order yields 252 FPS (Low), 205 FPS (Medium, min 174, max 235), 157 FPS (High), and 119 FPS (Ultra). The percentage reductions between tiers are 18.7%, 23.4%, and 24.2% respectively. The Medium-to-High and High-to-Ultra gaps remain consistent with 1080p, but the Low-to-Medium gap narrows, indicating the GPU is becoming more of a factor even at lower quality settings.
At 3840x2160, the results are 140 FPS (Low), 114 FPS (Medium, min 96, max 131), 87 FPS (High), and 66 FPS (Ultra). The reductions are 18.6%, 23.7%, and 24.1% between consecutive tiers. The consistency of the Medium-to-High and High-to-Ultra gaps across all three resolutions (around 23-24%) suggests these settings primarily affect GPU-bound effects that scale uniformly with resolution. Meanwhile, the Low-to-Medium gap shrinks from 12.4% at 1080p to 18.6% at 4K, indicating the Low preset's reduced draw distance and texture quality have more CPU impact at lower resolutions.
Settings Recommendations
For players targeting the highest frame rates, Low settings at 1080p deliver 355 FPS, which far exceeds the refresh rate of most monitors. Even at 1440p Low, 252 FPS provides ample headroom for high-refresh displays. At 4K, Low settings still achieve 140 FPS, making this preset viable for competitive play where responsiveness is paramount.
For a balanced experience, Medium settings offer the best measured consistency, as this is the only preset with min FPS data across all resolutions. At 1080p, the 264-357 FPS range (311 average) shows tight frame pacing. At 1440p, the 174-235 FPS range (205 average) remains smooth, and at 4K, the 96-131 FPS range (114 average) stays above 90 FPS despite the demanding resolution.
High settings provide a middle ground with 239 FPS at 1080p, 157 FPS at 1440p, and 87 FPS at 4K. The jump from Medium to High costs 23-24% performance while the visual improvement is subjective. For 4K users, High's 87 FPS average is playable but falls short of 100 FPS thresholds. Ultra settings are only recommended for 1080p (181 FPS) or 1440p (119 FPS) users who prioritize visual fidelity; at 4K, 66 FPS average may feel sluggish for a fast-paced survival game.
The data indicates Medium at 1440p (205 FPS) or High at 1080p (239 FPS) offer the best frame rate-to-quality ratios, depending on monitor resolution. For 4K users, Medium (114 FPS) is the highest preset that maintains triple-digit performance.
CPU Role
The AMD Ryzen 7 7800X3D brings 8 cores and 16 threads based on the Zen 4 architecture, manufactured on TSMC's 5 nm process. Its base clock of 4.20 GHz and boost clock of 5.00 GHz, combined with a 96 MB shared L3 cache, provide the memory subsystem that Palworld's open-world rendering benefits from. The CPU's 3D V-Cache design (implied by the "X3D" naming, though not explicitly stated in the cache fields) contributes to its strong benchmark scores: Cinebench R23 multicore of 16,817, single-core of 1,713, and Geekbench multicore of 15,610.
The CPU's role in Palworld is most evident at lower resolutions where frame rates exceed 300 FPS. At 1080p Low, the system achieves 355 FPS, which approaches the practical limit for game engine draw call processing on 8 cores. The 3DMark multi-thread scores—7,980 at 16 threads, 7,967 at max threads—show near-linear scaling from 8 threads (6,539) to 16 threads, indicating the processor effectively utilizes its SMT capabilities. The single-thread score of 959 in 3DMark and 1,713 in Cinebench R23 indicate strong per-core performance, essential for Palworld's main thread.
The 7800X3D's 120 W TDP and dual-channel DDR5 memory support with 83.2 GB/s bandwidth provide sufficient memory throughput. Its 96 MB L3 cache likely reduces memory latency for frequently accessed game assets, which is particularly beneficial in Palworld's persistent world where many objects and creatures coexist. The CPU's percentile rank of 83rd among all processors, with an average benchmark score of 33,079, confirms it is a high-end part, though not the absolute best. In Palworld specifically, the 355 FPS at 1080p Low suggests the CPU can handle extreme frame rates, but the 45% FPS drop from 1440p to 4K at all settings confirms the GPU becomes the bottleneck as resolution increases.
Hardware Specifications
AMD Ryzen 7 7800X3D
NVIDIA GeForce RTX 5090 D
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 7800X3D + NVIDIA GeForce RTX 5090 D in Palworld
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 140.0 |
| 3840x2160 | Medium | 114.0 |
| 3840x2160 | High | 87.0 |
| 3840x2160 | Ultra | 66.0 |
| 2560x1440 | Low | 252.0 |
| 2560x1440 | Medium | 205.0 |
| 2560x1440 | High | 157.0 |
| 2560x1440 | Ultra | 119.0 |
| 1920x1080 | Low | 355.0 |
| 1920x1080 | Medium | 311.0 |
| 1920x1080 | High | 239.0 |
| 1920x1080 | Ultra | 181.0 |
Palworld with Ryzen 7 7800X3D + Other GPUs
See how Palworld performs with the same CPU but different graphics cards.
Palworld with RTX 5090 D + Other CPUs
See how Palworld performs with the same GPU but different processors.
Other Games with Ryzen 7 7800X3D + RTX 5090 D
Explore FPS benchmarks for other games using this same hardware combination.