Archeage

# Archeage with AMD Ryzen 5 7400F + NVIDIA GeForce RTX 5090 D

The data for Archeage with the AMD Ryzen 5 7400F and NVIDIA GeForce RTX 5090 D reveals a striking pattern: an exceptionally powerful GPU paired with a solid mid-range CPU produces frame rates that are heavily dictated by resolution and settings, with the 4K Ultra preset dropping to just 52 FPS while the 1080p Low preset reaches 245 FPS. This combination ranks 43rd out of 2,761 tested combos, placing it in the top 1.6% of systems, yet the game's 2014 release date and MMO nature suggest that the CPU's role becomes increasingly prominent as resolution decreases. The measured data shows a system that can handle high refresh rates at 1440p and 1080p, but the 4K Ultra experience remains surprisingly demanding for a title of this era, hinting at optimization quirks rather than raw hardware limits.

Resolution Scaling

The FPS drop from 1080p to 4K tells a clear story about where the bottleneck lies in this system. At High settings, the average frame rate falls from 197 FPS at 1920x1080 to 132 FPS at 2560x1440, then down to 76 FPS at 3840x2160 — a cumulative reduction of approximately 61% from the 1080p baseline. For Low settings, the scaling is even more dramatic: 245 FPS at 1080p becomes 214 FPS at 1440p and then 125 FPS at 4K, representing a 49% drop from the lowest to highest resolution. The Medium preset shows a similar trajectory, with 235 FPS at 1080p, 195 FPS at 1440p, and 112 FPS at 4K, while Ultra settings demonstrate the steepest cliff: 134 FPS at 1080p, 90 FPS at 1440p, and just 52 FPS at 4K.

This scaling behavior indicates that the RTX 5090 D is the dominant factor at higher resolutions, but the CPU begins to assert itself more at lower resolutions. The gap between 1080p and 1440p at Low settings (31 FPS difference) is smaller than the gap between 1440p and 4K (89 FPS difference), suggesting that the GPU's 32 GB of GDDR7 memory and 1.79 TB/s bandwidth are being increasingly taxed as pixel count rises. However, the fact that 1080p Low only reaches 245 FPS — not 300+ — implies that the Ryzen 5 7400F's six cores and twelve threads are limiting the frame ceiling even at the lowest settings. The data implies that Archeage is not a purely GPU-bound title; the 2014 engine appears to have per-core limitations that cap performance regardless of how powerful the graphics card is.

CPU Role

The AMD Ryzen 5 7400F is a six-core, twelve-thread processor from the 7000 series, based on the Zen 4 architecture codenamed Raphael, with a base clock of 3.70 GHz and a boost clock of 4.70 GHz. Its benchmark scores show strong single-thread performance — 3,072 in Cinebench R23 single-core and 3689 in Passmark single-thread — which matters for an MMORPG like Archeage that often relies on a few heavily loaded threads for game logic and network synchronization. The multi-threaded results are also respectable: 21,765 in Cinebench R23 multi-core and 25,645 in Passmark multithread, placing the CPU in the 83rd percentile among all CPUs.

In the context of this game, the CPU's 32 MB of shared L3 cache likely helps with the large world data and entity tracking typical of MMOs. The measured frame rates suggest that the CPU is not the primary constraint at 4K, where the GPU's workload dominates, but at 1080p Low, the system only achieves 245 FPS despite the RTX 5090 D being one of the fastest GPUs available. This ceiling points to the CPU's architecture and clock speed as the limiting factor — a 4.70 GHz boost clock is respectable, but Archeage's older engine may not scale well beyond a certain thread count. The CPU's nearest rivals — Intel Core i5-14600T (0.1% faster), AMD Ryzen 7 PRO 6850H (0.2% slower), and AMD Ryzen AI 7 PRO 360 (0.3% faster) — show that this processor sits in a competitive mid-range band, and its performance in this game likely reflects that positioning.

Settings Recommendations

Examining the measured FPS across settings and resolutions, the Medium preset emerges as the most balanced choice for most users. At 4K, Medium delivers 112 FPS average with a minimum of 95 FPS and maximum of 128 FPS, which is more than sufficient for smooth gameplay on a high-refresh-rate display. In contrast, High at 4K drops to 76 FPS, and Ultra falls to 52 FPS, which may cause noticeable stutter in crowded MMO scenarios. The jump from Low to Medium at 4K costs just 13 FPS (125 to 112), while the jump from Medium to High costs 36 FPS (112 to 76), suggesting that Medium offers the best visual fidelity per frame lost.

At 1440p, Medium provides 195 FPS with a 166-224 FPS range, which is ideal for competitive play or high-refresh monitors, while High sits at 132 FPS and Ultra at 90 FPS. The 1080p data shows that even Ultra can achieve 134 FPS, but Medium at 235 FPS (200-270 range) is the clear sweet spot for maximizing smoothness without sacrificing too much visual quality. For users who prioritize frame rate above all else, Low at 1080p hits 245 FPS, but the visual trade-off is likely severe. The data suggests that Medium is the default recommendation across all resolutions, with High being acceptable for 1440p and 1080p users who want better visuals, and Ultra reserved for those who accept lower frame rates or play at 1080p.

How This Combo Ranks

The combination of the AMD Ryzen 5 7400F and NVIDIA GeForce RTX 5090 D ranks 43rd out of 2,761 tested combos in Archeage, placing it in the 98.4th percentile of all systems tested for this game. This top-50 ranking is notable given that the CPU is a mid-range part (83rd percentile among all CPUs) paired with a top-tier GPU (92nd percentile among all GPUs). The discrepancy between the CPU's percentile and the combo's high rank suggests that Archeage benefits more from GPU power than from CPU power, at least at the resolutions tested here. The RTX 5090 D's average benchmark score of 77,712 places it just 1.1% above the AMD Radeon RX 6650M XT and 1.6% below the AMD Radeon RX 6850M XT in the GPU benchmark hierarchy, yet the combo's in-game rank is far higher than what those rival GPUs might achieve — indicating that the 32 GB VRAM and Blackwell architecture provide specific advantages in this game.

The 43rd rank out of 2,761 means there are 42 other combos that perform better in Archeage, but the data does not specify what those combos are. Given that the CPU is only in the 83rd percentile, it is plausible that higher-end CPUs like the Ryzen 7 or Ryzen 9 series could push the frame rates higher at 1080p, where the CPU bottleneck is more apparent. The rank also implies that this system is overkill for 1080p gaming — the 245 FPS at Low settings exceeds the refresh rate of most monitors, making the GPU's headroom largely unused at that resolution.

GPU Role

The NVIDIA GeForce RTX 5090 D is a monster of a graphics card: 32 GB of GDDR7 memory on a 512-bit bus delivering 1.79 TB/s of bandwidth, with 21,760 shading units, 680 texture mapping units, and 176 ROPs. Its clocks are 2017 MHz base and 2407 MHz boost, and it achieves 104.8 TFLOPS of FP32 performance. The card's benchmark scores are impressive — 44,065 in Passmark G3D and 310,674 in Geekbench OpenCL — yet its in-game performance in Archeage suggests that the game does not fully utilize its capabilities. At 4K High, the card delivers 76 FPS, which is far below what its raw specs might suggest for a 2014 MMORPG, indicating either poor optimization for high-end hardware or a CPU bottleneck that prevents the GPU from reaching its potential.

The GPU's 32 GB VRAM is likely never fully utilized by Archeage, which is a game from 2014 and probably does not require more than a few gigabytes of memory. The card's 1750 MHz memory clock (28 Gbps effective) and 1.79 TB/s bandwidth are overkill for this title, yet the frame rates at 4K Ultra (52 FPS) show that even this massive bandwidth cannot overcome the game's engine limitations. The GPU's percentile ranking of 92nd among all GPUs indicates it is near the top of the hierarchy, but its nearest rivals in benchmark scores — the AMD Radeon RX 6650M XT (1.1% slower) and AMD Radeon RX 6850M XT (1.6% faster) — are mobile-class GPUs, which is an unusual comparison that highlights how benchmark scores do not always translate to real-world game performance. In Archeage, the RTX 5090 D's raw power appears to be constrained by the game's engine, with the card's performance scaling more with resolution than with settings, as seen in the 4K Low (125 FPS) versus 1080p Ultra (134 FPS) results.

FAQ

Q: What is the best resolution for this combo in Archeage?

A: Based on the measured data, 2560x1440 provides the best balance, with 195 FPS at Medium settings and 132 FPS at High, offering high frame rates while maintaining visual quality. At 1080p, frame rates exceed 200 FPS on most settings, but the visual clarity of 1440p is a worthwhile trade-off.

Q: Why does 4K Ultra only achieve 52 FPS when the GPU is so powerful?

A: The 4K Ultra preset's 52 FPS average indicates that Archeage's engine has significant overhead at maximum settings, likely due to unoptimized shaders or draw calls. The GPU's 32 GB VRAM and 1.79 TB/s bandwidth are not the limiting factor; instead, the game's 2014-era engine appears to struggle with the combination of high resolution and maximum detail.

Q: Is the Ryzen 5 7400F holding back the RTX 5090 D in this game?

A: The data suggests yes, at least at lower resolutions. The 1080p Low setting reaches only 245 FPS, which is below what the GPU could theoretically push, and the CPU's 83rd percentile ranking among all CPUs indicates it is not a top-tier processor. The six cores and twelve threads, combined with a 4.70 GHz boost clock, are sufficient for most games, but Archeage's CPU-bound scenarios may limit the frame ceiling.

Q: How does this combo compare to other tested systems?

A: This combo ranks 43rd out of 2,761 tested combos, placing it in the top 1.6% of all systems for Archeage. This is notably high given the CPU's mid-range status, suggesting that the GPU's power is the primary driver of the combo's strong performance.

Q: What is the difference between Low and Ultra settings at 4K?

A: At 4K, Low averages 125 FPS while Ultra averages 52 FPS — a difference of 73 FPS (a 58% reduction). The Medium setting sits between at 112 FPS, and High at 76 FPS, showing that the most significant performance hit occurs when moving from High to Ultra.

Q: Should I use the Medium or High preset for the best experience?

A: Based on the measured data, Medium offers the best frame-per-visual-quality ratio: at 1440p it delivers 195 FPS versus High's 132 FPS, and at 4K it delivers 112 FPS versus High's 76 FPS. The 36 FPS drop from Medium to High at 4K is substantial, while the visual improvement may be marginal in a fast-paced MMO environment.

Measured FPS Breakdown

The measured FPS data for Archeage with the AMD Ryzen 5 7400F and NVIDIA GeForce RTX 5090 D is presented below, organized by resolution and settings:

1920x1080 (1080p):

• Low: 245 FPS average
• Medium: 235 FPS average (200 FPS minimum, 270 FPS maximum)
• High: 197 FPS average
• Ultra: 134 FPS average

2560x1440 (1440p):

• Low: 214 FPS average
• Medium: 195 FPS average (166 FPS minimum, 224 FPS maximum)
• High: 132 FPS average
• Ultra: 90 FPS average

3840x2160 (4K):

• Low: 125 FPS average
• Medium: 112 FPS average (95 FPS minimum, 128 FPS maximum)
• High: 76 FPS average
• Ultra: 52 FPS average

The data shows a consistent pattern: Medium settings provide the most stable frame times (with minimum and maximum values recorded only for Medium), while Low settings offer the highest averages but may sacrifice visual quality. The scaling from 1080p to 4K is roughly linear for Low and Medium settings, but High and Ultra experience steeper drops, particularly at 4K where Ultra falls below 60 FPS. The 1080p Low result of 245 FPS is the highest recorded average, while the 4K Ultra result of 52 FPS is the lowest, representing a 79% decrease from the best to worst case scenario. For users with high-refresh-rate monitors, the 1440p Medium setting at 195 FPS is likely the sweet spot, while 4K users should stick to Medium or Low to avoid dropping below 60 FPS.