Palworld
This combination provides smooth gameplay with an average of 78 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 28 | 36 | 47 | 58 |
| 1440p QHD | 50 | 65 | 85 | 105 |
| 1080p Full HD | 75 | 99 | 129 | 159 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Palworld with AMD Ryzen 5 2600 + AMD Radeon RX 7600 XT, In-Depth Analysis
The AMD Ryzen 5 2600 and AMD Radeon RX 7600 XT combination in Palworld delivers a playable, though not exceptional, experience, landing in the 64th percentile of all tested combos. With a rank of 2364 out of 3711 combinations, this pairing sits firmly in the mid-range, offering a baseline for 1080p gaming but struggling to maintain high frame rates at higher resolutions. The data indicates a system where the CPU’s age and the GPU’s mid-range positioning create a tangible performance ceiling, particularly when demanding settings are enabled.
How This Combo Ranks
The combo’s rank of 2364 out of 3711 tested combinations places it in the lower half of the performance distribution, indicating that while it can run the game, it is not a top-tier setup. This position is consistent with the individual component standings: the Ryzen 5 2600 sits at the 75th percentile among all CPUs, while the RX 7600 XT sits at the 60th percentile among all GPUs. The pairing does not boost either component; instead, the overall result reflects a balanced but modest hardware pairing.
When compared to its nearest rivals, the CPU shows a tight cluster of scores. The Ryzen 5 2600’s average benchmark score of 21484 is within 1.2% of the AMD EPYC 9454 and within 0.7% of the Intel Xeon D-1746TER. This suggests that for this game, the 2600’s performance is typical for its class, with no significant outlier behavior that would shift the combo ranking. The GPU similarly shows a narrow margin against its rivals, with the RX 7600 XT’s average score of 17083 being just 0.7% behind the NVIDIA GeForce RTX 3070 and 0.3% ahead of the NVIDIA GeForce GTX 690. This indicates that the GPU is performing as expected for its tier, and the combo’s overall rank is a direct consequence of both parts being competent but not class-leading. The 64th percentile ranking suggests that over a third of tested systems deliver better performance in Palworld, making this a viable entry-level or secondary gaming setup rather than a high-refresh-rate powerhouse.
FAQ
Q: What is the best resolution for this combo in Palworld?
A: The data shows that 1920x1080 is the most effective resolution, with average FPS ranging from 75 on Ultra to 159 on Low. At 2560x1440, the average FPS drops to between 50 on Ultra and 105 on Low, while 3840x2160 sees averages from 28 on Ultra to 58 on Low.
Q: How does the CPU’s age affect performance in this game?
A: The Ryzen 5 2600, with its 6 cores and 12 threads, has a benchmark score that places it at the 75th percentile. Its nearest rival, the Intel Core Ultra 5 228V, scores only 0.2% higher, indicating that while it is not a top performer, it is not a significant bottleneck at lower resolutions where the GPU is the limiting factor.
Q: Is the RX 7600 XT a good match for the Ryzen 5 2600?
A: The combination’s rank of 2364 out of 3711 suggests a balanced pairing. The GPU’s 16 GB of VRAM and 288.0 GB/s bandwidth provide ample resources for the game’s textures, but the CPU’s single-thread performance (Passmark score of 2239) can limit frame rates when settings are lowered, as seen in the 1080p Low result of 159 FPS.
Q: What settings provide a smooth experience at 1440p?
A: At 2560x1440, the Medium preset yields an average of 85 FPS with a minimum of 72 and maximum of 98, which is the only preset in this resolution that maintains an average above 60 FPS. High settings drop to 65 FPS average, while Ultra falls to 50 FPS.
Q: Can this combo handle 4K gaming?
A: 4K gaming is possible but not ideal. The 3840x2160 Low preset achieves an average of 58 FPS, while Medium drops to 47 FPS, and High falls to 36 FPS. Ultra is the only preset that fails to reach 30 FPS, averaging 28 FPS.
Q: How does the combo’s ranking compare to its component percentiles?
A: The CPU’s 75th percentile and GPU’s 60th percentile do not translate to a high combo rank. The 64th percentile ranking of the combo (2364/3711) indicates that Palworld’s specific engine and workload characteristics result in a lower overall standing than the individual component scores might suggest.
CPU Role
The AMD Ryzen 5 2600 is a 6-core, 12-thread processor based on the Zen architecture, with a base clock of 3.40 GHz and a boost clock of 3.90 GHz. Its 16 MB of shared L3 cache and support for DDR4 memory are standard for its generation. In Palworld, a survival game that involves significant world simulation and entity management, the CPU’s multi-threading capabilities are exercised, but the data suggests that its single-thread performance is a more critical factor.
The CPU’s Passmark single-thread score of 2239 and Cinebench R15 single-core score of 157.3 indicate that it is not a leader in per-core performance. This is reflected in the 1080p Low preset result of 159 FPS, which is the highest average recorded for this combo. In contrast, the multi-threaded scores (Cinebench R15 multicore of 1248, Passmark multithread of 13160) are respectable for a 6-core part. The game’s frame rate scaling between presets at 1080p shows that as settings are reduced, the GPU becomes less of a bottleneck, and the CPU’s limitations become more apparent.
The nearest rival data shows the CPU is competitive with the Intel Core Ultra 5 228V (0.2% ahead) and the Intel Xeon D-1746TER (0.7% behind), but these are not gaming-specific comparisons. The CPU’s performance in Palworld is likely more dependent on its ability to feed the GPU with draw calls and physics calculations, which is constrained by its 3.90 GHz boost clock. The fact that the combo’s rank is lower than the CPU’s percentile suggests that Palworld is sensitive to the CPU’s architectural efficiency, which is not fully captured by synthetic benchmarks.
Measured FPS Breakdown
The measured FPS data provides a clear picture of the combo’s capabilities across resolutions and settings. At 1920x1080, the system delivers playable frame rates across all presets. The Low preset averages 159 FPS, Medium averages 129 FPS (with a minimum of 110 and maximum of 149), High averages 99 FPS, and Ultra averages 75 FPS. These numbers show a smooth scaling curve, with each preset step reducing the average by roughly 20-30 FPS.
At 2560x1440, the performance drops are more pronounced. The Low preset averages 105 FPS, Medium averages 85 FPS (with a minimum of 72 and maximum of 98), High averages 65 FPS, and Ultra averages 50 FPS. The gap between Low and Ultra at this resolution is 55 FPS, indicating that the GPU is starting to feel the load of higher pixel counts. The Medium preset’s minimum of 72 FPS suggests that frame pacing remains stable even under load.
At 3840x2160, the combo struggles to maintain high frame rates. The Low preset averages 58 FPS, making it the only 4K preset to stay above the 60 FPS threshold (though barely). Medium averages 47 FPS (with a minimum of 40 and maximum of 54), High averages 36 FPS, and Ultra averages 28 FPS, which is below the playable threshold for many users. The data shows a clear trend: the RX 7600 XT’s 16 GB VRAM is sufficient, but its 288.0 GB/s bandwidth and 22.57 TFLOPS of FP32 compute are not enough to drive 4K at high settings.
Resolution Scaling
The frame rate scaling from 1080p to 4K reveals where the bottleneck lies. Going from 1920x1080 to 2560x1440, the average FPS drops by approximately 34% across all settings (e.g., High drops from 99 to 65 FPS, Low from 159 to 105 FPS). This is a classic sign of the GPU becoming more stressed as pixel count increases. The scaling from 1440p to 4K is more severe, with an additional 45-50% drop (e.g., High drops from 65 to 36 FPS, Medium from 85 to 47 FPS).
This pattern indicates that the GPU is the primary limiting factor at higher resolutions. The RX 7600 XT’s 128-bit memory bus and 288.0 GB/s bandwidth are modest for a 16 GB card, and the data shows that the card cannot sustain high frame rates at 4K. The CPU’s role in this scaling is less pronounced, as the 1080p results show that even at Low settings, the system does not reach frame rates that would indicate a severe CPU bottleneck (159 FPS is high, but not in the field of 200+ FPS seen with newer CPUs). The combo’s performance scaling is consistent with a mid-range GPU, and the data suggests that users should target 1080p or 1440p for a balanced experience.
Settings Recommendations
Based on the measured data, the optimal settings depend on the user’s resolution target. For 1920x1080, the Ultra preset at 75 FPS average is the best choice for visual fidelity without sacrificing playability, as it maintains a comfortable frame rate above 60 FPS. The High preset at 99 FPS is also excellent for users who prefer a higher refresh rate, while the Medium preset at 129 FPS is ideal for competitive play.
For 2560x1440, the Medium preset is the clear winner, with an average of 85 FPS and a minimum of 72 FPS. This provides a smooth experience with good visual quality. The High preset at 65 FPS is acceptable, but the minimum frame rate is not provided, so the Medium preset’s documented stability makes it the safer choice. The Ultra preset at 50 FPS is not recommended for this resolution, as it falls below the 60 FPS threshold.
For 3840x2160, the Low preset is the only viable option, averaging 58 FPS. The Medium preset at 47 FPS may be playable for some, but the High and Ultra presets (36 and 28 FPS, respectively) are not recommended for a smooth experience. The data clearly indicates that this combo is not designed for 4K gaming, and users should either lower their resolution or adjust their expectations.
GPU Role
The AMD Radeon RX 7600 XT, based on the RDNA 3.0 architecture, is the dominant component in this pairing for Palworld’s visual output. With 16 GB of GDDR6 memory on a 128-bit bus, it offers a substantial VRAM pool, but its 288.0 GB/s bandwidth is a limiting factor at high resolutions. The GPU’s boost clock of 2755 MHz and game clock of 2470 MHz provide solid compute throughput, as evidenced by its 22.57 TFLOPS FP32 performance.
In Palworld, the GPU’s role is evident in the frame rate scaling. At 1080p, the GPU has headroom, allowing the CPU to be the limiting factor at low settings (159 FPS). As resolution increases, the GPU becomes the bottleneck, with 4K Ultra dropping to 28 FPS. The GPU’s Passmark G3D score of 17132 places it just 0.7% behind the NVIDIA GeForce RTX 3070, but the RTX 3070’s higher bandwidth likely explains why the RX 7600 XT struggles more at 4K. The 16 GB VRAM is a future-proofing feature, but it does not compensate for the bandwidth limitation in this game. The data suggests that the GPU is capable of delivering excellent 1080p and good 1440p performance, but its 128-bit memory interface restricts its 4K capabilities.
Hardware Specifications
AMD Ryzen 5 2600
AMD Radeon RX 7600 XT
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 2600 + AMD Radeon RX 7600 XT in Palworld
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 58.0 |
| 3840x2160 | Medium | 47.0 |
| 3840x2160 | High | 36.0 |
| 3840x2160 | Ultra | 28.0 |
| 2560x1440 | Low | 105.0 |
| 2560x1440 | Medium | 85.0 |
| 2560x1440 | High | 65.0 |
| 2560x1440 | Ultra | 50.0 |
| 1920x1080 | Low | 159.0 |
| 1920x1080 | Medium | 129.0 |
| 1920x1080 | High | 99.0 |
| 1920x1080 | Ultra | 75.0 |
Palworld with Ryzen 5 2600 + Other GPUs
See how Palworld performs with the same CPU but different graphics cards.
Palworld with RX 7600 XT + Other CPUs
See how Palworld performs with the same GPU but different processors.
Other Games with Ryzen 5 2600 + RX 7600 XT
Explore FPS benchmarks for other games using this same hardware combination.